• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.645-648
• /
• 2016

Cluster based wireless sensor networks have a characteristic that the cluster heads collect and aggregate data from sensor nodes and send data to sink node. In addition, between the adjacent sensor nodes deployed in the same area is characterized to the similar sensing data. In this paper, we propose a transmission algorithm for improving the energy efficiency using these two features in the cluster-based wireless sensor networks. Adjacent neighboring nodes form a pair and the two nodes sense data on shifts for one round. Additionally, two cluster heads are selected in a cluster and one of them alternately collects data from nodes and transmits data to the sink. This paper describes a transmission rounding method and a transmission frame for increasing energy efficiency and compared with conventional methods. We perform computer simulations to evaluate the performance of the proposed algorithm, and show better performance in terms of energy efficiency as compared with the LEACH algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.574-575
• /
• 2018

The generation of redundant data according to the spatial-temporal correlation in a wireless sensor network that reduces the network lifetime by consuming unnecessary energy. In this paper, data collection experiment through the particulate matter sensor is carried out to confirm the spatial-temporal data redundancy and we propose permitted limit setting method for data transmission to solve this problem. In the proposed method, the data transmission permitted limit is set by using the integrated average value in the cluster. The set permitted limit reduces the redundant data of the member node and it is shows that redundant data reduction is possible even in a variable environment of collected data by resetting the permitted limit in the cluster head.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.3
• /
• pp.471-489
• /
• 2013

Data compression at the transport layer could both reduce transmitted bytes over network links and increase the transmitted application data (TCP PDU) in one RTT at the same network conditions. Therefore, it is able to improve transmission efficiency on Internet, especially on the networks with limited bandwidth or long delay links. In this paper, we propose an on-the-fly TCP data compression scheme, i.e., the TCPComp, to enhance TCP performance. This scheme is primarily composed of the compression decision mechanism and the compression ratio estimation algorithm. When the application data arrives at the transport layer, the compression decision mechanism is applied to determine which data block could be compressed. The compression ratio estimation algorithm is employed to predict compression ratios of upcoming application data for determining the proper size of the next data block so as to maximize compression efficiency. Furthermore, the assessment criteria for TCP data compression scheme are systematically developed. Experimental results show that the scheme can effectively reduce transmitted TCP segments and bytes, leading to greater transmission efficiency compared with the standard TCP and other TCP compression schemes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.583-584
• /
• 2011

• Journal of IKEEE
• /
• v.12 no.2
• /
• pp.81-86
• /
• 2008

In wireless communication system using 2.4GHz radio link, data rate varies with time due to interferences, which causes the performance degradation. Therefore, effective transmission methods are required to obtain better performance according to varying data rate. This paper proposes a novel method that increases the data rate, as well as the influence of different loop-filter bandwidths on the performance of the PLL. Experimental results show that the proposed method is effective because it can achieve higher throughput in various data rate.

• International journal of advanced smart convergence
• /
• v.2 no.1
• /
• pp.27-29
• /
• 2013

This paper discusses comparative analysis of the effects of surge protection devices (SPD) upon the power line communication channels. The quality of the data transmission channel is measured based on the data rate for the various channel parameters which include channel length and application method of the lightning protection device. The performance measurements are also carried out for various lengths of the communication channel. Experiment results show that specific combination of SPDs applied in the network causes severe degradation of the channel quality which is associated with the combination of grade levels and channel lengths.

• The KIPS Transactions:PartC
• /
• v.14C no.7
• /
• pp.597-602
• /
• 2007

In conventional cooperative communication data rate is 1/2 than non cooperative protocols. In this paper, we propose a full data rate DF (Decode and Forward) cooperative transmission scheme. Proposed scheme is based on time division multiplexing (TDM) channel access. When DF protocol has full data rate, it can not obtain diversity gain under the pairwise error probability (PEP) view point. If it increases time slot to obtain diversity gain, then data rate is reduced. The proposed algorithm uses orthogonal frequency and constellation rotation to obtain both full data rate and diversity order 2. Moreover, performance is analyzed according to distance and optimized components that affect the system performance by using computer simulation. The simulation results revealed that the cooperation can save the network power up to 7dB over direct transmission and 5dB over multi-hop transmission at BER of $10^{-2}$. Besides, it can improve date rate of system compared with the conventional DF protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.943-950
• /
• 2005

Recently, many of researches on stream transmission for satisfying each of different real-time transmission condition of the multimedia data that demands various service quality through high-speed networks have been studied actively. In this paper, we design a scheme that discriminately reserves the network resources for the transmission of each multimedia application and propose a bandwidth allocation scheme for improving the utilization ratio of free resources. And we also propose a pipelining scheme for providing flexible real-time transmission. The proposed schemes can be used to support a real-time transmission by applying feedback transmission control method based on receiving buffer for guaranteeing the synchronization conditions requested by the multimedia data. Moreover, we propose a transmission control scheme that can take the amount of network resources down to the minimum amount within the range of permissible error-range under the guarantee with no quality degradation simultaneously when the bottleneck is caused by the network congestion. Finally, we propose a dynamic bandwidth smoothing scheme that can smooth the maximum bandwidth to the demand of each video steam for giving continuous transmission to the delay sensitive video steam between senders and receivers.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.11a
• /
• pp.413-418
• /
• 2000

For Pneumatic system control, we need a data transmission system with high speed and high realibility for information interchange between main computer and solenoid valves and I/O devices. This paper presents a set of design techniques for a data communication system that is mainly used for pneumatic system control. For this purpose, we first designed hardware modules for an interface between central control module and local node that handles the operation of solenoid valves. In addition we developed a communication protocol for construction of RS-485 based multidrop network, and this protocol is basically designed with a kind of polling technique. Finally we evaluated performance of the developed system. The field test results show that, even under high noise environment, the data transmission of 375Kbps rate is possible up to 1,000m without using repeater. In addition, the system developed in this research is proved to be used easily for extension of a communication network because of its module structure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.11
• /
• pp.1482-1484
• /
• 2019

We present a method for transmitting 3D object information in real time in a telepresence system. Three-dimensional object information consists of a large amount of point cloud data, which requires high performance computing power and ultra-wideband network transmission environment to process and transmit such a large amount of data in real time. In this paper, multiple users can transmit object motion and facial expression information in real time even in small network bands by using GANs (Generative Adversarial Networks), a non-supervised learning machine learning algorithm, for real-time transmission of 3D point cloud data. In particular, we propose the creation of an object similar to the original using only the feature information of 3D objects using conditional GANs.