• ETRI Journal
• /
• 제40권3호
• /
• pp.318-329
• /
• 2018

Femtocell (FC) technology envisaged as a cost-effective approach to attain better indoor coverage of mobile voice and data service. Deployment of FCs over macrocell forms a heterogeneous network. In urban areas, the key factor limits the successful deployment of FCs is inter-cell interference (ICI), which severely affects the performance of victim users. Autonomous FC transmission power setting is one straightforward way for coordinating ICI in the downlink. Application of intelligent control using soft computing techniques has not yet explored well for wireless networks. In this work, autonomous FC transmission power setting strategy using Adaptive Neuro Fuzzy Inference System is proposed. The main advantage of the proposed method is zero signaling overhead, reduced computational complexity and bare minimum delay in performing power setting of FC base station because only the periodic channel measurement reports fed back by the user equipment are needed. System level simulation results validate the effectiveness of the proposed method by providing much better throughput, even under high interference activation scenario and cell edge users can be prevented from going outage.

• Transactions on Electrical and Electronic Materials
• /
• 제17권1호
• /
• pp.1-6
• /
• 2016

Ensuring the secure operation of power systems has become an important and critical matter during the present time, along with the development of large, complex and load-increasing systems. Security constraints such as the thermal limits of transmission lines and bus-voltage limits must be satisfied under all of a system’s operational conditions. An alternative solution to improve the security of a power system is the employment of Flexible Alternating-Current Transmission Systems (FACTS). FACTS devices can reduce the flows of heavily loaded lines, maintain the bus voltages at desired levels, and improve the stability of a power network. The Unified Power Flow Controller (UPFC) is a versatile FACTS device that can independently or simultaneously control the active power, the reactive power and the bus voltage; however, to achieve such functionality, it is very important to determine the optimal location of the UPFC device, with the appropriate parameter setting, in the power system. In this paper, a genetic algorithm (GA) method is applied to determine the optimal location of the UPFC device in a network for the enhancement of the power-system loadability and the minimization of the active power loss in the transmission line. To verify our approach, simulations were performed on the IEEE 14 Bus, 30 Bus, and 57 Bus test systems. The proposed work was implemented in the MATLAB platform.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1987년도 춘계학술발표회 논문집
• /
• pp.196-200
• /
• 1987

In this paper A NET-CUE System is designed and implemented for tramsmission of the network cuing informations with using data packet broad casting techniques. This system is composed with encoder and decoder. To show the performance of this system An eye height and bit error rate are cheched. The eye height is greater than 74% and The bit error rate is less than 4.6 * 10 The exper imental results show that this system provides a good quality of the operation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.422_423
• /
• 2009

DNP 3.0 is the most widely used data communication protocol for electric power control systems. KEPCO(Korea Electric Power Corporation) also uses DNP 3.0 as a data transmission protocol for the DAS(Distribution Automation System) and the SCADA system of the transmmission system. But DNP 3.0 is one of the oldest industrial standard having many restrictions and there are many considerations for optimal design of DNP 3.0 network for the Distribution Automation System.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.33-35
• /
• 2000

We propose a intelligent controller for FACTS(Flexible AC Transmission System) device to stabilize a power system. In order to identify the nonlinear characteristics of the power system and to estimate a control signal, an artificial neural network is utilized. The control signal which is provided for FACTS device installed in the network is produced. The proposed controller is applied to Unified Power Flow Controller(UPFC) to verified the effectiveness of the proposed control system. The results show that the proposed nonlinear FACTS controller is able to enhance the transient stability of three machine nine bus power system.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.902-908
• /
• 2009

TETRA는 유럽 전기 통신 표준협회에서 제안한 D-TRS 서비스의 표준이다. 현재 국가전력IT무선 기간망으로 TETRA가 채택되어, 다양한 활용을 위한 국가사업이 진행되고 있는 실정이다. 이와 같은 경우 TETRA 무선망을 이용하기 위해서는 TETRA 모뎀이 필요하게 된다. 따라서 각 제조사별로 존재하는 다양한 TETRA 모뎀의 성능 평가가 절실한 상황이다. 본 논문에서는 D-TRS 무선망 환경에서의 패킷 데이터 성능 평가를 위해 PED(Protocol Evaluation Data)를 제안하였다. 또한 Test Bed 상에서 TG(Traffic Generator)와 TA(Traffic Analyzer)를 이용하여 데이터 길이 및 전송 인터벌에 따른 성능 측정을 실시하여 모뎀의 성능을 알아보았다. 데이터 크기는 최초 10바이트에서 400바이트까지 10바이트씩 증가시키면서 측정하였고, 0.5초, 1초, 1.5초간격으로 각각 1000번 씩 전송하여 전송시간을 측정하였다. 측정한 전송시간을 바탕으로 평균전송속도, MER(Message Error Rate)을 도출하여 TETRA 모뎀 성능을 측정하였다. 본 논문에서 사용한 TETRA 모뎀은 EADS 사의 TMR880i 2대를 사용하였고, 교환기로는 EADS 사의 SwMI (Switching and Management Infrastructure)를 이용하였다.

• 전기전자학회논문지
• /
• 제13권3호
• /
• pp.80-86
• /
• 2009

TETRA는 유럽 전기 통신 표준협회(ETSI)에서 Digital Trucked Radio기반의 표준이다. 우리나라 국가전력IT 무선 기간망으로 TETRA가 채택되었다. 이와같은 상황에서 TETRA 무선망을 사용하기 위해서는 TETRA 모뎀이 필요하게 된다. 본 논문에서는 TETRA 네트워크에서의 트래픽에 따른 모뎀의 성능평가와 그 결과를 분석하였다. 본 논문에서는 ETSI에서 제안한 PEI(Peripheral Equipment Interface)에서 제시하는 전송 규격 중 SDS type-4 전송방식을 사용하였다. 성능 측정은 SDS로 전송하는 데이터의 크기와 전송간격을 조절하면서 실시하였다. 데이터 크기의 범위는 10바이트에서 140바이트까지 10바이트씩 증가하도록 하였다. 또한 각 전송 데이터 크기마다 전송 전송간격을 0.5초, 1초, 1.5초로 주어 각각 1000번씩 측정하였다. 본 논문에서 사용된 TETRA모뎀은 유니모에서 만든 MU-1000MD이고, 교환기는 Teltronic 사의 SwMI(Switching and Management Infrastructure)를 사용하였다.

• 대한의용생체공학회:의공학회지
• /
• 제29권4호
• /
• pp.295-301
• /
• 2008

A wireless 3 channel ECG monitoring system was developed so that it could monitor the health and movement state during subject's daily life. The developed system consists of a wireless biomedical signal acquisition device, a personal healthcare server, and a remote medical server. Three experiments were performed to evaluate the accuracy, reliability and operability, applicability during daily life of the developed device. First, ECG signals were measured using the developed device and commercial reference device during sitting and marking time and compared to verify the accuracy of R-R intervals. Second, the reliable data transmission to remote server was verified on two types of simulated emergency event using patient simulator. Third, during five types of motion in daily life, the accuracy of data transmission to remote server using CDMA network was verified on two types of event occurring. By acquiring and comparing subject's biomedical signal and motion signal, the accuracy, reliability and operability, applicability during daily life of the developed device were verified. In addition, PDA-phone based wireless system enabled subject to be monitored without any constraints. Therefore, the developed system is expected to be applicable for monitoring the aged and chronic diseased people and giving first-aid in emergency.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2006년도 춘계학술논문발표회 논문집
• /
• pp.56-60
• /
• 2006

• 한국컴퓨터정보학회논문지
• /
• 제22권4호
• /
• pp.75-82
• /
• 2017

While the internet has evolved in terms of information sharing and efficiency, it is still prone to security attacks and remains vulnerable even when equipped with a security mechanism. Repeated patching against hacks involves excessive wear of system equipment and high costs. Methods of improving network security include the introduction of security equipment and network partitions, but they have not been fully effective. A fundamental solution is the Operation Content Network (OCN), which enables the strengthening of authentication. In this paper, Instead of following the existing TCP/IP system, OCN establishes an immunity-based security system through content-centric communications. Data transmission occurs over a Content Centric Network (CCN), which is provided with a protocol verified by the CCNx group. Areas protected by OCN rely only on CCN for communication without using any IP. As such, it defends the system against unknown attacks, including zero-day attacks.