• 제목/요약/키워드: Transmission grating

검색결과 148건 처리시간 0.018초

Optical Power Transfer of Grating - Assisted Directional Coupler with Three - Guiding Channels : TM modes Case

  • Ho, Kwang-Chun;Ho, Kwang-Soo
    • Journal of the Optical Society of Korea
    • /
    • 제8권4호
    • /
    • pp.149-155
    • /
    • 2004
  • Newly developed modal transmission-line theory(MTLT) is used to analyze rigorously the optical power distribution in grating-assisted directional couplers(GADCs) with three guiding channels. By defining a novel coupling efficiency ${\eta}$ amenable to the rigorous analytical solutions of modal transmission-line theory, we explicitly evaluate the power coupling and distribution of TM modes. The results reveal that the incident power is sensitively partitioned through three output channels in terms of such grating parameters as the grating period, the duty cycle, and the operating wavelength.

Phase-Shifted Fiber Bragg Grating Transmission Filters Based on the Fabry-Perot Effect

  • Liu, Y.u;Lee, S. B.;Choi, S. S.
    • Journal of the Optical Society of Korea
    • /
    • 제2권1호
    • /
    • pp.30-33
    • /
    • 1998
  • We present the analysis of phase-shifted fiber Bragg gratings by coupled-mode equations. The transmission is expressed as that of a Fabry-Perot resonator with complex reflectance and complex transmittance. The transmission spectrum, the effective cavity length, and the behaviors with different phase-shifts are investigated. A very flattered transmission peak is obtained by introducing three phase-shifts in a grating.

CPA 시스템 구성을 위한 고효율 투과형 유전체 회절격자 설계 (Design of High Efficiency Transmission Dielectric Grating for Chirped Pulse Amplification)

  • 조현주;정재우;이상현;김수종;이정섭;진대현;정지호;손승현
    • 한국광학회지
    • /
    • 제33권6호
    • /
    • pp.260-266
    • /
    • 2022
  • 2개의 결합층과 2개의 격자 층으로 구성된 회절격자 구조를 형성하고, 최적화 기법을 통하여 -1차에서 높은 투과 회절 효율을 가지는 회절격자를 설계하였다. 설계된 회절격자는 설계 중심파장에서 99.997%의 transverse electric wave 회절 효율을 가지고 있었으며, 95% 이상의 회절 효율을 유지하는 파장 폭이 80 nm이고 입사각 폭이 20.0°이었다. 회절격자 공차 분석을 수행하여 95% 이상의 회절 효율을 가지기 위한 두께 공차가 최소 60 nm 이상 확보되어 있고, 내부각도 10° 이내의 사다리꼴 모양에서도 회절 효율을 유지할 수 있음을 확인하였다.

비대칭 장방형 격자로 구성된 광 도파로의 누설 파와 DFB 특성 (Leaky-Wave and DFB Characteristics of Optical Waveguide with Asymmetric Rectangular Grating Profile)

  • 호광춘
    • 한국인터넷방송통신학회논문지
    • /
    • 제21권2호
    • /
    • pp.151-156
    • /
    • 2021
  • 고유치 문제에 기초한 모드 전송선로 이론 (Modal Transmission-Line Theory: MTLT)을 이용하여 비대칭 정방형 격자로 구성된 광 도파로의 누설특성과 Bragg 조건들을 정확하게 분석하였다. 비대칭 정방형 격자로 구성된 광도파로는 Bragg 조건들에서 leaky-wave stop-band가 나타났으며, Bragg 조건 근처에서 Rayleigh-Wood 조건에 기인한 anomalies 현상이 발생함을 보였다. 또한, 주기적인 격자구조의 특성 임피던스에 기초한 종 방향 등가 전송선로를 구성하여 광 도파로의 DFB 특성을 Bragg 조건에서 분석하였다. 분석 결과, leaky-wave stop-band가 발생하는 Bragg 조건 근처에서 DFB 도파로의 반사전력이 최대가 되는 filtering 특성이 활성화되는 것을 확인하였다.

광섬유 브래그 격자의 투과 및 반사 스펙트럼간 동일 선로상 변환이 가능한 편광상이 배치구조 기반 광섬유 필터 (Polarization-Diversity-Loop-Configuration-Based Fiber Filter Realizing Inline Conversion Between Transmission and Reflection Spectra of Fiber Bragg Grating)

  • 장욱;이용욱
    • 조명전기설비학회논문지
    • /
    • 제25권5호
    • /
    • pp.1-6
    • /
    • 2011
  • By incorporating a polarization-diversity loop configuration (PDLC), we have demonstrated inline conversion between transmission and reflection spectra of a fiber Bragg grating (FBG) without reconfiguration of the fiber filter structure. The proposed apparatus consists of a polarization beam splitter, an FBG, and two quarter-wave plates (QWP's). The inline conversion operation between transmission and reflection spectra of the FBG was performed by proper adjustment of QWP's within the proposed filter. The band rejection ratio and side-mode suppression ratio in transmission and reflection modes of the fabricated filter were measured as ~17.0[dB] and ~16.4[dB], respectively.

Performance Evaluation of A Tunable Dispersion Compensator based on Strain-Chirped Fiber Bragg Grating in a 40 Gb/s Transmission Link

  • Kim, Chul-Han;Bae, Jun-Key;Lee, Kwan-Il;Lee, Sang-Bae
    • Journal of the Optical Society of Korea
    • /
    • 제12권4호
    • /
    • pp.244-248
    • /
    • 2008
  • We have evaluated the performance of strain-chirped fiber Bragg grating (FBG) based tunable dispersion compensator in a 40 Gb/s transmission link. In our proposed compensator, the value of dispersion could be changed from -353 ps/nm to -962 ps/nm by adjusting the rotation angle of the metal beam on which the FBG was mounted. In order to evaluate the effect of ripples in reflectivity and variations in passband of the FBG based dispersion compensator, transmission performance has been measured with our tunable dispersion compensator. Error-free transmission of a 40 Gb/s non-return-to-zero (NRZ) signal over conventional single-mode fiber (SMF) was achieved.

Blazed 격자 구조형 방향성 결합기의 광학 특성 (Optical Characteristics of Blazed Grating-Assisted Directional Coupler)

  • 호광춘
    • 한국인터넷방송통신학회논문지
    • /
    • 제19권5호
    • /
    • pp.175-180
    • /
    • 2019
  • 새로운 고유치 문제에 기초한 모드 전송선로 이론 (Modal Transmission-Line Theory: MTLT))을 이용하여 blazed 격자 구조형 방향성 결합기 (B-GADC)의 광학 특성과 채널사이의 전력전달을 자세하게 분석하였다. 설계한 B-GADC의 결함효율을 분석하기 위하여 격자주기와 파장에 따라 변하는 quasi-TE 모드와 quasi-TM 모드의 분산곡선을 수치 해석하였으며, blazing 특성이 GADC의 결합효율에 미치는 영향을 분석하기 위하여 대칭형, 톱니형 그리고 비대칭형 blazed 격자구조를 설계하고 평가하였다. 수치해석 결과, blazed 격자구조가 대칭형에서 비대칭형으로 변함에 따라 최대 전력전송을 위한 최소 간격 조건을 만족하는 격자주기는 줄어들었으며 결합길이는 반대로 늘어나는 것을 확인하였다.

비대칭 격자구조에 기초한 플라즈마 편광 빔 분리기의 구현 (Implementation of Plasmonic Polarization Beam Splitter based on an Asymmetric Grating Profile)

  • 호광춘
    • 한국인터넷방송통신학회논문지
    • /
    • 제24권2호
    • /
    • pp.155-160
    • /
    • 2024
  • 편광 선택적 빔 분리 격자는 수많은 광학 정보처리 시스템에서 널리 사용되고 있다. 본 논문에서는 고효율 플라즈마 편광 빔 분리기 (PBS)를 설계하기 위하여 Littrow 구조에서 Ag 금속 층으로 구성된 소자를 구현하였다. 구현한 PBS는 투과되는 0차 TE 편광과 반사되는 0차 TM 편광에서 높은 회절효율을 달성할 수 있도록 격자깊이 및 격자 비율을 정확한 모드 전송선로 이론 (Modal Transmission-Line Theory)을 사용하여 최적화하였다. 최적화된 결과로부터 PBS는 입사 파장과 각도에 대한 광대역 특성의 장점을 가지고 있으며, TE, TM 편광 모두에 대하여 95% 보다 높은 효율을 나타내었다. 그러므로, 높은 흡광비를 갖는 이 고효율 PBS 광대역 격자는 우수한 광 회절 장치로 사용될 수 있다.

Cryogenic Thermal Cycling Test on IGRINS cross-disperser VPH Grating

  • 정현주;임주희;이성호;;박수종;육인수
    • 천문학회보
    • /
    • 제36권2호
    • /
    • pp.156-156
    • /
    • 2011
  • VPH (Volume Phase Hologram) grating is one of the transmission gratings and is known as its remarkable efficiency (>90%). It has two different densities of gelatins causing interference patterns. The VPH grating is favored in many astronomical instruments these days and also IGRINS, which is up coming near infrared high-resolution spectroscope expected to see the first light next year, uses the VPH grating as its cross-disperser. The infrared astronomical instruments operate at cryogenic temperature (~100K) in order to cut down thermal noise and the optical components of IGIRNS will be operated at 130K. The VPH grating is sandwiched in between fused silica or glass and glued together using optical adhesive. IGRINS is expected to go through 50 times of thermal cycling in 10 years including the performance test and this research is to check whether the physical characteristic such as the adhesion or dichromatic gelatin does not break and change from the several cryogenic thermal cycling. The two identical test gratings provided from Kaiser Optical System, Inc. are used in this test. One VPH grating is cooled down to 100K for 2 hours with maximum dT/dt = 5 and warmed up to the room temperature and another grating is kept stored in the room temperature and used as a control sample. In order to check the change, we inspected the grating with eyes and checked its efficiency and transmission at the room temperature every 10 cycling. From the 40 times of cryogenic temperature cool down cycling, the VPH grating showed no signs of change within the error compared to the control sample. We concluded the VPH grating is durable through several cryogenic thermal cycling.

  • PDF

Analysis of a Triangular-shaped Plasmonic Metal-Insulator-Metal Bragg Grating Waveguide

  • Jafarian, Behnaz;Nozhat, Najmeh;Granpayeh, Nosrat
    • Journal of the Optical Society of Korea
    • /
    • 제15권2호
    • /
    • pp.118-123
    • /
    • 2011
  • A novel triangular-shaped plasmonic metal-insulator-metal (MIM) Bragg grating waveguide is introduced, whose band-gap is narrower than that of the conventional step type and wider than that of the sawtoothshaped one. Moreover apodized triangular-shaped MIM Bragg grating structures are proposed in order to reduce the side lobes of the transmission spectrum, because the Bragg reflector with a sawtooth profile has a smoother transmission spectrum than that of a triangular-shaped one. The performance of the proposed structures is simulated by using the finite difference time domain method.