• 한국지리정보학회지
• /
• 제7권2호
• /
• pp.69-77
• /
• 2004

현재 국내에서 관리하고 있는 지하시설물들은 몇몇의 문제점을 가지고 있다. 특히, 한국전력공사의 경우 현장에서 구축되는 지리정보 및 속성정보의 신속한 갱신이 되지 않아 보다 정밀하고 안정된 한국전력 선로관리가 어려운 실정이다. 또한, 토목공사 현장에서 관리감독을 수행하고 있는 한국전력 관계자들은 지리정보체계에 대한 지식과 정보는 부족하지만, 현장에 부합되는 지리정보 및 속성정보를 파악하고 있다. 따라서 보다 효율적인 한국전력의 선로관리를 위해서는 이들의 업무분석내용을 충분히 참조해야 하는데 기존의 한국전력 선로관리시스템의 정보는 그러하지 못한 문제점을 가지고 있다. 본 연구에서는 한국전력공사에서 시설물공사를 통하여 구축된 송 배전 지하시설물에 관한 지리정보 및 속성정보를 이용하여 실무자에게 보다 쉽고 안전하게 유지 관리할 수 있도록 사용자 중심의 송 배전 지하시설물관리시스템을 구축하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1655-1662
• /
• 2018

This paper studies the magnetic fields between the power lines which are finite length and other ones which are infinitely long around the first tower in the proximity of the power transformers. They will be used as a source of disturbance applied to the power line. The method applied in this study was gradual; develop the theoretical formulation of the magnetic fields of these lines which are finite length and other ones which are infinitely long, examine the effects of different couplings between the different neighboring lines and the distribution transformers on behavior of magnetic fields. The method also focused on the experimental results analyzing the magnetic fields which will be used as a source applied to the auditory implants EMC. The theoretical and experimental results were compared and discussed for three power lines (90kV, 150kV and 225kV) near the power station, and it proved the effect of these substations on the simulated and measured results of the magnetic field. The maximum intensities of magnetic fields measured at the height of 1m from the ground for the circuit of three lines close to each substation were significantly lower than the ICNIRP reference levels for occupational and non occupational exposures.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.553-555
• /
• 2000

Recently polymer insulators are being used for outdoor high voltage applications. Polymer insulators for transmission line have significant advantages over porcelain and glass insulators, especially for ultra-high voltage(UHV) transmission lines. In this paper, the design trend and method polymer insulator are investigated and Aging test method is analysed to know life time of insulator.

• 대한전자공학회논문지TC
• /
• 제39권5호
• /
• pp.243-250
• /
• 2002

임의 복사패턴을 만족시키는 배열안테나 소스 전류분포 합성시 사용하는 Woodward-Lawson 샘플링법은 우함수형 복사패턴 합성에 주로 사용되어 왔다. 본 연구에서는 이를 확장하여 기함수형 패턴도 만족시키는 비선형 소스 분포함수의 최적합성법을 제시하고, 이를 임의의 반사특성을 갖는 단일 및 결합선로의 불균일 모드 임피던스 프로필 합성에 동시에 적용하였다. 이 최적합성법은 주파수영역 반사패턴에 내재된 복소null점의 최적 섭동에 기본을 두고 있다. 제어된 반사패턴의 표본값으로부터 분산특성을 갖는 임피던스 프로필이 직접 계산되므로서 기존외 불균일선로 합성법보다 매우 간단함을 보였다. 그리고 서로 다른 임피던스간의 정합을 위한 기존이 테이퍼선로 이론에 기초한 불균일선론 합성법들을 탈피하여, 서로 같은 임피던스간의 불균일선로 합성도 가능케하므로서 본 연구에서 제시한 방법은 일반성을 가진다. 임의 통과대역을 갖는 필터 설계에 적용, 분석하므로서 타당성을 보였다.

• 한국진공학회지
• /
• 제8권4B호
• /
• pp.556-564
• /
• 1999

The analysis on heat fluxed on and transmission efficiencies by the collimators of neutral beam injection lines in KSTAR tokamak device has been carried out. And a mathematical model describing non-Gaussian beam distribution profile has been established. A neutral beam injection device is composed of 3 separate ion sources and corresponding beam transport lines, which deal with 7.8 MW of beam power, respectively. The divergence angles of ion beam are $1.2^{\circ}$and $0.5^{\circ}$, in vertical and horizontal directions, respectively. The maximum normal heat load on source exit scraper is 9.1 kW/$\textrm{cm}^2$ and net beam transmission efficiency is ~28%. The effect of misalignment of ion source and scrapers on the scraper heat load and beam transmission also has been analyzed.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2212-2219
• /
• 2018

This paper describes extended fault location algorithm using estimated remote source impedance. The method uses data only at the local end and the sequence current distribution factors for more accurate estimation. The proposed algorithm can respond to variation of the local and remote source impedance. Therefore, this method is especially useful for transmission lines interconnected to a wind farm that the source impedance varies continuously. The proposed algorithm is very insensitive to the variation in fault distance and fault resistance. The simulation results have shown the accuracy and effectiveness of the proposed algorithm.

• Wind and Structures
• /
• 제35권2호
• /
• pp.93-108
• /
• 2022

Steel tubular towers are commonly used in UHV and long crossing transmission lines. By considering effects of the model scale, the solidity ratio and the ratio of the mean width to the mean height, wind tunnel tests under different wind speeds on twenty tubular steel tower body models and twenty-six tubular steel cross-arm models were completed. Drag coefficients and shielding factors of the experimental tower body models and cross-arm models in wind directional axis for typical skewed angles were obtained. The influence of the lift forces on the skewed wind load factors of tubular steel tower bodies was evaluated. The skewed wind load factors, the wind load distribution factors in transversal and longitudinal direction were calculated for the tubular tower body models and cross-arm models, respectively. Fitting expressions for the skewed wind load factors of tubular steel bodies and cross-arms were determined through nonlinear fitting analysis. Parameters for skewed wind loads determined by wind tunnel tests were compared with the regulations in applicable standards. Suggestions on the drag coefficients, the skewed wind load factors and the wind load distribution factors were proposed for tubular steel transmission towers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.355-357
• /
• 2002

Distribution lines are spanned on a much large area as compared to transmission lines, and therefore, are more often susceptible to lightning strokes. The selection of the proper value of basic insulation level(BIL), for particular insolation components of distribution structures in specific, is very important. Lightning strikes has current risetimes ranging from 0.1 to several $\mu s$ and can produce transient overvoltages substantially greater than the BIL of many distribution systems in spite of lightning arresters. This paper describes lightning overvoltage of a 22.9kV distribution system due to lightning strike. This study will provide the information on insulation coordination studies to adopt BIL.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권1호
• /
• pp.13-18
• /
• 2000

The paper proposes a simple method to calculate the portion of real power losses of transmission lines allocated to individual loads. The method is implemented by defining loss distribution factors, and analyses the loads shares in the transmission line losses. The paper also performs calculation of sensitivities of the line losses with respect to load changes so as to be easily employed in on-line applications. Effectiveness of the algorithm is verified by computer simulations and it is estimated that the results can be used to compute the cost of one ancillary service under deregulated environment in electric power industries.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1363-1365
• /
• 1999

This paper Presents an algorithm for the computation of fault location for a transmission line by means of the voltage and current signals. It is impossible to calculate the accurate fault distance, because of the fault resistance and fault current which are unknown. All Currents in the lines are divided by the current distribution factor, so the fault current through the fault resistance can be represented by using data from one terminal of transmission line. This algorithm proposed can calculate the fault distance with only the faulty phase information.