• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.156-162
• /
• 2011

The control loop time delay caused by sampling, the zero-order-holder effect and calculations is inevitable in the digital control of dc-dc switching converters. The time delay will limit the bandwidth of the control loop and therefore degrade the transient performance of digital systems. In this paper, the quantization time delay effects with different time delay values based on a generic second-order system are analyzed. The conclusion that the bandwidth of digital control is reduced by about 20% with a one cycle delay and by 50% with two cycles of delay in comparison with no time delay is obtained. To compensate the time delay and to increase the control loop bandwidth, a duty ratio predictive control scheme based on linear extrapolation is proposed. The compensation effect and a comparison of the load variation transient response characteristics with analogy control, conventional digital control and duty ratio predictive control with different time delay values are performed on a point-of-load Buck converter by simulations and experiments. It is shown that, using the proposed technique, the control loop bandwidth can be increased by 50% for a one cycle delay and 48.2% for two cycles of delay when compared to conventional digital control. Simulations and experimental results prove the validity of the conclusion of the quantization effects of the time delay and the proposed control scheme.

• 한국통신학회논문지
• /
• 제36권9B호
• /
• pp.1117-1125
• /
• 2011

이 논문에서는 LED(Light Emitting Diode) 조명을 이용한 간편한 가시광 통신 시스템을 구현하기 위해, 비 캐리어 NRZ-OOK(non-return to zero on off keying) 변조 방식을 사용하고, 가시광 송신을 위한 발광소자인 $3{\times}3$ 백색 LED 배열과 가시광 수신을 위한 여러 가지 포토다이오드를 사용하여 송수신 소자사이의 거리가 약 2.5m이고, 전체 시스템 속도가 115.2kbps의 전송속도를 가지는 가시광 시스템을 설계하여 구현 한다. 구현된 시스템의 성능분석을 위해 LED 와 포토다이오드 종류, LED 배열 수, 전송속도 따른 최대 송수신 거리를 구하고 여러 가지 구현시스템의 성능을 실험을 통해 분석한다.

• ETRI Journal
• /
• 제31권3호
• /
• pp.254-262
• /
• 2009

This paper presents a novel simple filter design method based on a parallel short-ended coupled-line structure with capacitive loading for size reduction and ultra-broad rejection of spurious passbands. In addition, the introduction of a cross-coupling capacitor into the miniaturized coupled-line can create a transmission zero at the second harmonic frequency for better frequency selectivity and attenuation level. The aperture compensation technique is also applied to achieve a strong coupling in the coupled-line section. The influence of using the connecting transmission line to cascade two identical one-stage filters is studied for the first time. Specifically, such a two-stage bandpass filter operating at 2.3 GHz with a fractional bandwidth of 10% was designed and realized with low-temperature co-fired ceramic technology for application in base stations that need high power handling capability. It achieved attenuation in excess of -40 dB up to $4f_0$ and low insertion loss of -1.2 dB with the size of 10 mm ${\times}$ 7 mm ${\times}$ 2.2 mm. The measured and simulated results showed good agreement.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권4호
• /
• pp.181-190
• /
• 2014

This paper reports a cognitive radio network architecture based on overloaded multicarrier direct sequence code division multiple access (O-MC-DS-CDMA). The O-MC-DSCDMA technique combines CDMA with a multicarrier modulation technique to overcome the channel fading effects. In this technique, secondary users are enabled to share the available bandwidth with the existing primary users. Two sets of orthogonal Gold codes are used to support the primary and secondary users simultaneously. The orthogonality between the spreading codes is lost due to the non-zero cross correlation between the codes and the timing synchronization error in the uplink transmission, which causes interference between primary and secondary users. This paper proposes two modified hybrid parallel/successive interference cancellation techniques for primary and secondary user base station receivers with multiple antennas to suppress the interference among users. Interference among the same group of users is cancelled by parallel interference cancellation and the interference among groups is cancelled using successive interference cancellation. The simulation results confirmed that the proposed modified interference cancellation techniques show better BER performance over conventional interference cancellation techniques.

• 대한임베디드공학회논문지
• /
• 제1권1호
• /
• pp.24-30
• /
• 2006

With the original Transmission Control Protocol(TCP) design, which is particularly targeted at the wired networks, a packet loss is assumed to be caused by the network congestion. In the wireless environment where the chances to lose packets due to transmission bit errors are not negligible, though, this assumption may result in unnecessary TCP performance degradation. In these days, many papers describe about wireless-TCP which has suggested how to avoid congestion control when packet loss over the wireless network. In this paper, an enhancement scheme is proposed by modifying SNOOP scheme. To enhance the original SNOOP scheme, CPC(Consecutive Packet Control) and ZWSC(Zero Window Size Control) are added. The invocation of congestion control mechanism is now minimized by knowing the cause of packet loss. We use simulation to compare the overhead and the performance of the proposed schemes, and to show that the proposed schemes improve the TCP performance compares to SNOOP by knowing the cause of packet loss at the base station.

• 대한전자공학회논문지TC
• /
• 제48권5호
• /
• pp.33-39
• /
• 2011

두명의 사용자를 위한 무선 통신에서 심볼 간 간섭 및 다중 접속 간섭을 최소화하는 유동적인 전송률 back-off 적용 지연 time reversal (TR) 기법의 성능을 평가하였다. 지연 TR 기법의 성능을 기존 full-rate TR과 full back-off TR의 성능과 비교하였으며, guard interval이 1보다 큰 경우 비트오차율 측면에서 지연 TR 기법의 성능이 full-rate TR이나 full back-off TR보다 우수함을 확인하였다.

• 한국통신학회논문지
• /
• 제37권5A호
• /
• pp.305-310
• /
• 2012

이 논문은 단일 반송파 시스템에 적용 가능한 특히 순차적 역컨벌루션 기법과 단일 반송파 변조를 하이브리드하게 사용한 송수신 기법에 선택적 결합 기법을 활용하여 성능을 향상시킨 알고리즘을 제안한다. 선택적 결합 알고리즘은 안테나 공간 다이버시티 효과를 갖는 알고리즘으로서 수신기 입장에서 좋은 채널을 선택할 수 있다는 장점이 있고 이것을 활용할 경우 수신기 입장에서는 안테나 개수만 증가하고 기저대역은 종래의 수신기와 동일한 구조를 유지할 수 있다는 장점이 있다. 제안하는 알고리즘은 종래의 주파수 영역 등화기를 사용한 단일 반송파 전송 알고리즘과 비교하여 성능향상이 우수한 것으로 나타났다.

• Journal of Power Electronics
• /
• 제17권3호
• /
• pp.653-663
• /
• 2017

Multilevel active neutral-point-clamped (ANPC) converter combines the advantages of three-level ANPC converter and multilevel flying capacitor (FC) converter. However, multilevel ANPC converter often suffers from capacitor voltage balancing problems. In order to solve the capacitor voltage balancing problems for five-level ANPC converter, phase-shifted pulse width modulation (PS-PWM) is used, which generally provides natural voltage balancing ability. However, the natural voltage balancing ability depends on the load conditions and converter parameters. In order to eliminate voltage deviations under steady-state and dynamic conditions, the active voltage-balancing control (AVBC) methods of floating capacitors and dc-link capacitors based on PS-PWM are proposed. First, the neutral-point current is regulated to balance the neutral-point voltage by injecting zero-sequence voltage. After that, the duty cycles of the redundant switch combinations are adjusted to balance the floating-capacitor voltages by introducing moderating variables for each of the phases. Finally, the effectiveness of the proposed AVBC methods is verified by experimental results.

• 인터넷정보학회논문지
• /
• 제10권6호
• /
• pp.219-228
• /
• 2009

멀티미디어의 응용이 날로 빈번해지면서 유효한 데이터에 대한 저장과 전송의 기술에 아주 큰 수요가 나타났다. 많은 압축과 암호화를 결합한 방법들이 제기되어 왔지만 그들은 안전하지 못하거나 계산의 양이 너무 큰 단점이 있고 특히 모바일 기기에서의 무선통신에는 더욱더 부적합할 수밖에 없다. 본 논문에서는 새로운 해결책인 선택적 암호화를 제안한다. 본 논문에서는 quadtree와 zerotree에 기반 한 웨이블릿 압축 기법을 도입하여 압축된 데이터의 일부만을 암호화 하는 방법을 제안하였는데, 압축비율에 영향을 주지 않으면서 계산의 양을 줄임으로서 모바일 장치에서의 데이터 전송을 위하여 시간을 감소시키는 효과를 얻었다. 결론적으로 제안한 선택적 암호화 기법은 속도가 빠르고 안전하며 압축 성능을 감소시키지 않은 방법이라고 할 수 있다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.471-476
• /
• 1996

In this study, the method to use the phase shift keying (PSK) communication technique in smart transmitter is presented. In nuclear applications. smart transmitters for various parameters are expected to improve the accuracy of measurement and to reduce the load of calibration work. The capability of communication in field level is the most important merit of the smart transmitter. The most popular method is using of digital and analog techniques simultaneously - transmitting measurements from the field at 4∼20mA while modulating the current to carry digital information in both directions over the same twisted pairs. Conventional smart transmitters use the frequency shift keying (FSK) method for digital communication. Generally, however, the FSK method has the speed limit at 1200 bps. Amount of information to transmit becomes increasing as the processing technique is improved. The PSK method is noticeable alternative for high speed digital communication, but it has non-zero DC component. In order to use the PSK method in the field transmission with smart transmitter, the method to remove the DC component is studied in this work.