• 스마트미디어저널
• /
• 제4권3호
• /
• pp.38-43
• /
• 2015

스마트 단말(스마트폰, 태블릿 PC 등)들의 수가 증가함에 따라, 사용자들 간의 멀티미디어 콘텐츠 공유도 증가하고 있다. 스마트 단말 사용자들은 사용자 간 멀티미디어 콘텐츠 전송을 위해서 개별 앱들을 사용하고 있다. 하지만, WiFi나 3G에 연결되어 있는 단말들은 NAT(Network Address Translator)를 사용해 인터넷에 연결되기 때문에 단말 간의 직접적인 연결이 불가능하다. 이와 같은 한계를 극복하기 위해서, 본 논문에서는 추가적으로 서버를 활용하지 않고 거리의 제약이 없도록 푸시 서비스 기반의 파일 전송 기법을 제안하고 있다. 두 번째로, 수신 단말의 링크 대역폭을 기반으로 송신 단말의 전송량을 조절하는 혼잡 제어 기법을 제안하고 있다. 세 번째로, 서로 다른 대역폭을 가진 송신자들을 위해 대역폭 인지 기반 전송 기법을 제안하고 있다. 마지막으로 본 논문에서는 앱을 구현하고 스마트 단말을 이용해 실험을 수행함으로써, 제안하는 기법의 성능을 검증하였다.

• Journal of Power Electronics
• /
• 제8권3호
• /
• pp.248-258
• /
• 2008

The Voltage Source Converter (VSC) is replacing the conventional line commutated current source converters in High Voltage DC (HVDC) transmission systems. The control of a two-level voltage source converter and its design dealt with HVDC systems and various factors such as reactive power, power factor, and harmonics distortion are discussed in detail. Simulation results are given for the two-level converter and designed control is used for bidirectional power flow. The harmonics minimization is taken by extending the 6-pulse VSC to multipulse voltage source converters. The control is also tested and simulated for a 12-pulse voltage source converter to minimize the harmonic distortion in AC currents.

• 한국멀티미디어학회논문지
• /
• 제18권8호
• /
• pp.909-914
• /
• 2015

In wireless sensor networks, sensor nodes have a short transmission range and data is transferred from source to destination node using the multi-hop transmission. Sensor nodes are powered by battery and the link qualities are different, and the routing protocol in the wireless sensor network is one of the important technical issues. Multipath routing was proposed to reduce the data congestion and increase data throughput. In the multipath routing, however, each path can be interfered by the other path, and it can aggravate network performance. In this paper, we propose the multipath routing scheme for multi-rate wireless sensor networks. The multipath routing selects transmission paths to minimize transmission delay and path interference.

• Journal of Communications and Networks
• /
• 제12권5호
• /
• pp.442-448
• /
• 2010

Cooperative relaying methods have attracted a lot of interest in the past few years. A conventional cooperative relaying scheme has a source, a destination, and a single relay. This cooperative scheme can support one symbol transmission per time slot, and is caned full rate transmission. However, existing fun rate cooperative relay approaches provide asymmetrical gain for different transmitted symbols. In this paper, we propose a cooperative relaying scheme that is assisted with dual relays and provides full transmission rate with the same macro-diversity to each symbol. We also address equalization for the dual relay transmission system in addition to addressing the issues concerning the improvement of system performance in terms of optimal power allocations.

• 소음진동
• /
• 제9권4호
• /
• pp.795-805
• /
• 1999

Rubber mounts so called grommets and pipes are two major paths of vibration transmission from a compressor, an important vibration source in an air conditioner, to the whole unit. A procedure of configuring the suction and discharge pipes of the compressor was developed in this paper so as to reduce the vibration transmission through the pipes as well as the grommets. Through investigating the effects of shapes and connecting disrections of pipe elements on vibration transmission, a guideline to configure the pipe layout, which enables to reduce vibration transmission, was proposed. The initial pipe layout by the guideline was optimized with the objective function, minimization of boty vibration transmission and the cost, and with the constraints to yield the final dimensions of the pipes. The procedure not only minimizes the transmitted force to the circumferential devices but enables to eliminate rubber blocks or dampers, which are generally used to avoid resonances of the pipe system.

• 대한전자공학회논문지
• /
• 제21권4호
• /
• pp.24-30
• /
• 1984

군지연왜곡(상위왜곡)은 음성전송의 입장에서는 그다지 문제가 되지 않는 특성이다. 그러나 기존의 공중교환전화망(음성대역전송)을 통하여 데이터, FAX 등의 파형전송을 하는 경우에는 데이터 신호를 왜곡시키는 최대의 요인이 되므로 이를 철저하게 검토하여야 한다. 본고는 기존의 공중교환전화망을 데이터전송에 개방하기 위하여 군지연왜곡에 관한 해석을 하고, 실험 및 측정결과를 기술하고 또 이 왜곡의 개선에 대해서도 언급한 것이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.122-125
• /
• 2005

This study is an measurement and prediction of transmission loss through dash panel with multi-path in a vehicle. Measurement results of transmission loss are derided by sound power measured using the sound intensity method under locating a sound source in the anechoic room and reverberant room, respectively. Prediction one is decided by multi-path analysis of dash panel composed by a various part of materials and complicated shape. Finally, two results show a great agreement between measured and predicted transmission loss.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권7호
• /
• pp.2281-2301
• /
• 2014

In wireless ad hoc networks the nodes focus on achieving the maximum SINR for efficient data transmission. In order to achieve maximum SINR the nodes culminate in exhausting the battery power for successful transmissions. This in turn affects the successful transmission of the other nodes as the maximum transmission power opted by each node serves as a source of interference for the other nodes in the network. This paper models the choice of power for each node as a non cooperative game where the throughput of the network with respect to the consumption of power is formulated as a utility function. We propose an adaptive pricing scheme that encourages the nodes to use minimum transmission power to achieve target SINR at the Nash equilibrium and improve their net utility in multiuser scenario.

• Journal of Biosystems Engineering
• /
• 제23권6호
• /
• pp.539-548
• /
• 1998

This study was intended to develop a load spectrum acting on a transmission of agricultural tractors. Transmission loads were measured at the input shaft of the transmission and final drive shaft of the tractors. The measurement were conducted in five field conditions at two speed levels under plowing operations in Korea. Two torque transducers were developed for the respective load measurements and other necessary instrumentations were made to collect the data and store them in a data logger. The time-histories of the torque loads were analyzed and transformed into the load spectra using the rainflow counting and Smith-Watson-Topper methods. Comparisons of the load spectra developed under different conditions were made to investigate their characteristics. The effects on the load levels of soil and plowing speeds were also investigated. Finally, a load spectrum combining the results of the spectrum analysis was developed and proposed as a load source for the reliability test of transmissions.

• Journal of electromagnetic engineering and science
• /
• 제12권3호
• /
• pp.189-195
• /
• 2012

In this paper, we propose a novel protocol called a Multi-hop Diversity Transmission protocol in which the retransmission is realized by a relay that is Nearest to a current Source (MDTNS). We derive the mathematical expressions of the packet error rate (PER) and the average number of transmissions over Nakagami-m fading channels, and verify them by Monte Carlo simulations. The simulation results show that the MDTNS protocol improves the performance of the network in terms of PER when compared to the Multi-hop Diversity Transmission protocol in which the retransmission is done by a relay that is Nearest to Destination (MDTND) and to the conventional multi-hop transmission (CMT) protocol.