• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1E
• /
• pp.18-24
• /
• 2002

This paper discusses the development of an acoustic vector channel simulator for the performance analysis of an acoustic digital communication system. The channel simulator consists of transmission module, acoustic channel model, receiver, beamformer, and adaptive equalizer. The source signal (QPSK) is generated by the specified parameters. The transmitted signal generates multipath signals which have a different delay, amplitude and doppler frequency. The paper presents in details the approach to the performance analysis of an acoustic digital communication system according to the antenna structure and the various baseband signal processing techniques.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.12
• /
• pp.1903-1909
• /
• 1989

In this paper, the mobile communication CH simulator is implemented in the baseband, using the Digital Signal Processor(TMS320C25), A/D and D/A converters. The Rayleigh CH is modeled by shaping the random noise source power spectrum. The statistical characteristics(Level Crossing Rate, Cumulative distribution Function, Probability Density Function) and the received fading signal's power's spectrum is observed when the doppler frequency is varied according to the variation of the vehicular velocity at the 222MHz band. And also the BER is measured when the baseband mobile CH simulator is applied to the GMSK(Gaussian Minimum Shift Keying` transmission rate: 16kbps, Bb T=0.25) modulator. The results shows the similar characteristics to be compared with the theoritically derived BER values of the discriminator type GMSK detection.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.11
• /
• pp.1631-1638
• /
• 2015

This paper describes the design methodology of the operator training simulator for power monitor and control system in the railway system. In power system, the purpose of energy management system was to monitor, control, and analyze the performance of generation and transmission system based on H/W and S/W. Network analysis applications provide a clear picture of power system characteristics using state estimation, power flow and short circuit analysis. In this respect, the operator training system in the railway system should be equipped with the methodology of these systems. First, the proposed database structure in the railway system was introduced. Then the overall structure of operator training system based on railway analysis applications was proposed. Finally, a methodology to verify the performance of the developed applications was described.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.347-351
• /
• 2008

This study is concerned with the design of the communication based evaluation simulator for the development of the operational control algorithm for PRT(Personal Rapid Transit) system which has very short headway and requires accurate speed control of the vehicles to avoid the impact between the vehicles. The evaluation simulator is composed of central control system, vehicle control system, communication control system, AP for wireless communication, and monitoring system. For the mobile characteristics of the PRT vehicles wireless communication is employed for the transmission of the control and status information between the central control system and the vehicle control system. By using simple test operational control algorithm the effectiveness of the proposed evaluation simulator is shown.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.72-79
• /
• 2016

In this paper, we propose a Service-adaptive Tactical Data Transmission Protocol (STTS) based on Satellite Communications with narrow bandwidth. STTS is designed to provide additional field for scalability and scheduler for reliability of transport stream protocol based on digital broadcasting standard, DVB-S and DVB-S2. It is also verified the effects of lost data packets with narrow bandwidth through the simulator by traffic model and re-transmission of critical data, and checked the design considerations based on STTS system.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.331-332
• /
• 2008

최근 엘리노 현상과 기상이변(태풍 및 폭설)으로 갤로핑 및 전선도약(Sleet jump) 등에 따른 송전선로 상간단락 고장의 우려가 날로 증가하고 있다. 특히 345kV급 간선계통의 상간단락 고장은 순간전압 강화 등 전기품질 저하로 이어질 수 있다. 이에 본 논문에서는 345kV 2도체용 폴리머 상간스페이서를 개발하여 상간단락고장에 대한 근본적인 예방책을 제시하였다. 폴리머용 345kV 절연 설계, 고강도 FRP ROD 설계 및 턴버클을 이용한 미세조정 장치 적용, 코로나 방지를 위한 코로나 링 채용 등을 통하여 최적의 345kV 2도체용 상간스페이서를 고안하였다. 또한 상간스페이서 소재의 성능 평가 및 해석을 위하여 Maxwell 2D Field Simulator를 이용하여 모델링하였으며 갓 형상에 따른 전계분포 해석과 FRP와 고무 계면에서의 전계분포 해석도 수행하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.391-398
• /
• 1998

The intake noise, a major source of vehicle noises, has rapidly become a noticeable, and has been studied to reduce the level. Traditionally, the intake system has been developed through the road test and the experiment using a engine dynamo, namely, the trial and error process. This approach require very high cost and long time consuming to develop the system. In this study, the simulator which had a speaker in the cylinder head was presented. It was easy to analyze the acoustic characteristic of the intake system in laboratory environment. This study presented a improvement to reduce the level of the intake noise using the Transfer Matrix Method and NIT/SYSNOISE, FE analysis commercial software. It was to select optimum position of a resonator and verified by the simulator. This simulator can be used early in the design stage of development of the intake system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.4
• /
• pp.819-830
• /
• 1999

NAVTEX system is an international automated direct-printing service, broadcast on 5181kHz and 490kHz, for the promulgation of navigational and meteorological warnings and urgent information to ships. With our government's adoption of the international convention for SAR(Search and Rescue) in 1993, various trials for the installation of NAVTEX system have been executed by the government committee, relating laboratory and experts. An important consideration of the installation for NAVTEX system is the availability that could broadcast messages written in korean letter. Also, the receiver which can process the signal demodulated from the two frequencies, 518kHz and 490kHz, should be developed and supplied in domestic. In this paper, the code table and algorithm for conversions between NAVTEX characters and Korean Letters are studied, and signal processing techniques of code conversion are developed. Circuit design and implementation of the NAVTEX simulator using the Direct Digital Synthesizer are discussed, code conversion algorithm and signal processing technique of the NAVTEX transmission are programmed in its circuits. For evaluating the its functional characteristics, receiving module which has I-Q channel structure is designed. From the measurements of simulator, the characteristics show the frequency stability of the $(\pm)2Hz$ and Spurious free dynamic range is -63dBc. And the simulator can generate simultaneously wanted signal and several interfere signals. So, its capability is valuable for designers of the transmitting system and NAVTEX receiver, for provider as testing facilities of the type approval.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.8-15
• /
• 2012

Adaptive transmission technique is an effective means to counter-measure rain attenation that is one of the most significant factors degrading link quality in satellite communication systems. This paper introduces a simulator for adaptive transmission technique to compensate rain attenuation. In the simulator, a dynamic rain attenuation model is loaded, which was developed to synthesize Korean rain attenuation dynamics at a frequency band of Ka. It is a Markov chain model with rain attenuation parameters extracted from the rain attenuation data measured per second. In addition, various transmission schemes are embedded so that a user defined simulations can be performed. This paper demonstrates simulation results of adaptive schemes in comprison with fixed schemes, and show the efficiency of the adaptive schemes to compensate the rain attenuation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1531-1539
• /
• 2017

The existing SSD storage tester processed logs in a 1-N structure between server and client using TCP and network file system. This method causes some problems for example, an increase in CPU usage and difficulty in exception handling, etc. In this paper, we implement a log processing message layer that can deal with asynchronous distributed processing using open source messaging system such as kafka, RabbitMQ and compare this layer with existing log transmission method. A log simulator was implemented to compare the transmission bandwidth and CPU usage. Test results show that the transmission using the message layer has higher performance than the transmission using the message layer, and the CPU usage does not show any significant difference The message layer can be implemented more easily than the conventional method and the efficiency is higher than that of the conventional method.