• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.173-175
• /
• 2012

Temperature during concrete curing can be effectively used to predict the early age strength of concrete However, various current methods have limits to provide the temperature data in real time due to harsh working environment including frequent cutting of wires. This paper presents the results of our investigation of an all-in-one Wireless sensor network (WSN) for the management of the curing temperature of in-placed concrete at early curing stages. Also, the network device for transmission can be easily separated from the probe sensor part and reused consistently. The field experiment entailed measuring the curing temperature of concrete using the WSN. After fresh concrete was poured into the formworks, the signals were measured at a 150 m radius from the field office. The signal was acquired for 28 days without any dispersion or interruption at the construction site; therefore, this study confirms the applicability of the proposed system to a construction site.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.234-241
• /
• 2000

During the EFT immunity test, the fast transient voltage is injected to the power or signal line. The radiated noise from these lines influences the near-by EUT, and consequently, the reliability of the test result can be jeopardized. The measured data of the field strength and wave shape of the noise were compared with the result of the mathematical analysis using transmission line model. When the tests were performed by the conditions the same as stated in IEC 61000-4-4, the results showed that the magnitude of the radiated electric field strength was about 2.4KV/m, and it can cause severe interference to the intended operation of EUT.

• Journal of KIISE:Information Networking
• /
• v.31 no.4
• /
• pp.393-404
• /
• 2004

Recently, mSCTP (Mobile SCTP) has been proposed as a transport layer approach for supporting mobility. mSCTP is based on the ‘multi-homing’ feature of Stream Control Transmission Protocol(SCTP), and utilize the functions to dynamically add or delete IP addresses of end points to or from the existing connectionin order to support mobility. In this paper, we propose a mechanism to determine when to add or delete an W address, utilizing the link layer radio signal strength information in order to enhance the performance of mSCTP We also propose a mechanism for a mobile node to initiate the change of data delivery path based on link layer radio signal strength information. In addition, if it takes long time to acquire new data path, we propose an approach for reducing handover latency. The simulation results show that the performance of proposed transport layer mobility support mechanism is competitive compared to the traditional network layer mobility supporting approach. Especially, when the moving speed of mobile node is fast, it shows better performance than the traditional network layer approaches.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.491-498
• /
• 2014

As internet services are being provided through a wireless access, the importance of quality of experience (QoE) is stressed that is defined as the quality that indicates user's actual feeling when a service is provided. Unlike quality of service (QoS) that can be expressed as a numerical value, it is difficult to represent QoE in an objective way. If an internet service is serviced over a wireless channel, its QoE can be affected by a number of factors such as fading, mobility and so on. This paper, therefore, attempts to specify the relationship between QoE and QoS by conducting practical measurements for the voice service through 3G high speed packet access (HSPA) access network. Analysing the measured results, it has been shown that received signal strength indicator (RSSI) has a great influence on mean opinion score (MOS) through transmission delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9B
• /
• pp.745-750
• /
• 2008

In a cognitive radio based system, quality of service (QoS) for the secondary user must be maintained as much as possible even while that of the primary user is protected all he time. In particular, switching wireless links for the secondary user during the transmission of multimedia data causes delay and information loss, and QoS degradations occur inevitably. The efficient resource management scheme is necessary to support the seamless multimedia service to the secondary user. This paper proposes a novel frequency selection method based on Multi-Criteria Decision Making (MCDM), in which uncertain parameters such as received signal strength, cell load, data rate, and available bandwidth are considered during the decision process for the frequency selection with the fuzzy set theory. Through simulation, we show that our proposed frequency selection method provides a better performance than the conventional methods which consider the received signal strength only.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.12
• /
• pp.1007-1010
• /
• 2017

In this paper, a frequency selective surface(FSS) with bandstop operation for radio-frequency spectrum management is presented. The proposed FSS is composed of patterns of fractal-based miniaturized unit cells for stable performance for angles of incidence and polarizations. For practical applications requiring high productivity and environmental compatibility, we fabricated a film-type FSS by screen-printing using Ag ink, rather than a conventional manufacturing method using a printed circuit board. To validate this study, we measured the transmission characteristics of the proposed FSS using the free-space measurement method, and observed the received strength of signal penetrating the FSS film applied to a wall.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.206-208
• /
• 2005

Wireless sensor network's value has increased greatly in recent years in the fields of Ubiquitous Computing that function as solution to reduce both the limitation and collision about RFID Technology. The research for wireless sensor network technology is proceeding with the research for various sensor nodes, powerful routing algorithms, securities for data transmission, and valid applications. This paper suggests that we make the new multi-hop routing algorithm using RSS in order to implement enhanced multi-hop routing algorithm. This paper should demonstrate that the routing algorithm using suggested RSS is superior to routing algorithm based on established BSDV(Destination Sequenced Distance Vector).

• The Journal of Korea Robotics Society
• /
• v.4 no.3
• /
• pp.177-184
• /
• 2009

This paper presents an active assisted-living system in wireless sensor and actor network (WSAN) in which the mobile robot roles an actor. In order to provide assisted-living service to the elderly people, position recognition of the sensor node attached on the user and localization of the mobile robot should be performed at the same time. For the purpose, we use received signal strength indication (RSSI) to find the position of the person and ubiquitous sensor nodes including ultrasonic sensor which performs both transmission of sensor information and localization like global positioning system. Active services are moving to the elderly people by detecting activity sensor and visual tracking and voice chatting with remote monitoring system.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2008.10b
• /
• pp.634-642
• /
• 2008

Radio wave is the valuable resources in $21^{st}$ century. It will be widely used in various applications such as DMB, USN, telematics, and home network as well as mobile and wireless communications. Cognitive Radio technology is devised to maximize the utilization of radio resources by sensing near-by spectrum and dynamic and allocating free resources dynamically and adaptively. Wireless links for the secondary user need to be frequently switched to idle frequencies during the transmission of multimedia data in the cognitive radio based system. This may cause delay and information loss, and QoS degradations occur inevitably. The efficient frequency allocation scheme is necessary to support the seamless multimedia service to the secondary user while maintaining QoS of the primary user. This paper suggests a frequency selection scheme which considers other parameters such as cell load, data rate, and available bandwidth than just received signal strength during the frequency selection process. The performance of our proposed scheme is analyzed by simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.38-46
• /
• 2011

In this paper, we propose a calculation methodology of the service distance to assure the satisfactory quality of service for analogue and digital TV receivers. Using the field strength formulation for TV receiver based upon Rec. ITU-R P.1546, computational results are presented and discussed for both systems, and some important factors are reviewed in terms of the equivalent level of service, which must be kept due to ATV to DTV conversion. The presented method provides the predicted values of field strength at receiver areas to check whether transmission quality can be satisfied or not, and it can be also used for obtaining the protection ratio or separated distance from co-channel or adjacent interference signal.