• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.594-596
• /
• 1998

In this paper, a path control switch has been developed for self-healing operation in SDH-based transmission system. The proposed switch is suitable for self-healing operations in both an Unidirectional Path Switched Ring and a 2-fiber Bidirectional Line Switched Ring. The path control switch is implemented with $0.8{\mu}m$ CMOS LSI chip. The self-healing operation of the switch is effectively done by the configuration information stored in the registers of the switch. The switch has an AU-3(51.84Mb/s) TSI(Time Slot Interchange) and has 1.25Gb/s throughput. But the higher throughput can be realized by combining two identical switches or more with the parallel architecture.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.4
• /
• pp.1-8
• /
• 2014

In order to cope with shadow areas and to extend cell coverage, relay-assisted wireless communication systems have been widely studied. In this paper, we propose a space-frequency(SF) block coded orthogonal frequency division multiple access(OFDMA) transmission system in a relaying multi-path shadow area. The receiving performance of mobile station in a shadow area can be improved by applying SF block code to the recovered signals of multiple relays before re-transmitting them. The simulation result shows that the proposed SF block coded OFDMA transmission system considerably outperforms the conventional single-path OFDMA transmission system.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.1
• /
• pp.41-48
• /
• 2007

In this paper, we propose an optimal placement of sensor nodes with 2.4GHz wireless channel characteristics. The proposed method determines optimal transmission range based on log-normal path loss model, and optimal number of sensor nodes calculating the density of sensor nodes. For the lossless data transmission, we search the optimal locations with self-organizing feature maps(SOM) using transmission range, and number of sensor nodes. We demonstrate that optimal transmission range is 20m, and optimal number of sensor nodes is 8. We performed simulations on the searching for optimal locations and confirmed the link condition of sensor nodes.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.8
• /
• pp.679-685
• /
• 2002

Low-frequency mono-static reverberation model for shallow-water environment is presented. It is necessary to develop the transmission loss model to calculate the sub-bottom interaction because the ray-based transmission loss model is difficult to compute the pressure accurately which penetrates the bottom medium. In this paper reverberation level is calculated using the RAM (Range dependent Acoustic Model) to augment the multi-path expansion model because it does not estimate transmission loss accurately in shallow water. The signals generated by the L-HYREV and the GSM are compared with the observed signals and it is showed that the L-HYREV model provides a closer fit to the observed signals than those obtained using the GSM.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.2
• /
• pp.79-85
• /
• 2020

IIoT stands for Industrial Internet of Things used in manufacturing, healthcare, and transportation in networked smart factories. Recently, IIoT's environment requires an automated control system through intelligent cognition to improve efficiency. In particular, IIoT can be applied to automatic calibration of production equipment for improved management in industrial environments. Such automation systems require a wireless network for transmitting industrial data. Self-calibration systems in laser transmission paths using wireless networks can save resources and improve production quality by real-time monitoring and remote control of laser transmission path. In this paper, we propose a wireless networked system for self-calibration of laser equipment that requires a laser transmission path, and we show the results of the prototype evaluation. The self-calibration system of laser equipment measures the coordinates of the laser points with sensors and sends them to the host using the proposed application protocol. We propose a wireless network service for the wired motor controller to align the laser coordinates. Using this wireless network, the host controls the motor by sending a control command of the motor controller in an HTTP message based on the received coordinate values. Finally, we build a prototype system of the proposed design to verify the detection performance and analyze the network performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.10
• /
• pp.2658-2681
• /
• 2023

In edge computing scenarios, IoT end devices play a crucial role in relaying and forwarding data to significantly improve IoT network performance. However, traditional routing mechanisms are not applicable to this scenario due to differences in network size and environment. Therefore, it becomes crucial to establish an effective and reliable data transmission path to ensure secure communication between devices. In this paper, we propose a trusted path selection strategy that comprehensively considers multiple attributes, such as link stability and edge cooperation, and selects a stable and secure data transmission path based on the link life cycle, energy level, trust level, and authentication status. In addition, we propose the Stability-based On-demand Multipath Distance Vector (STAOMDV) protocol based on the Ad hoc AOMDV protocol. The STAOMDV protocol implements the collection and updating of link stability attributes during the route discovery and maintenance process. By integrating the STAOMDV protocol with the proposed path selection strategy, a dependable and efficient routing mechanism is established for IoT networks in edge computing scenarios. Simulation results validate that the proposed STAOMDV model achieves a balance in network energy consumption and extends the overall network lifespan.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.875-880
• /
• 2002

It is necessary to determine the vibration source and its transmission paths in order to develop a low-noise compressor. Through the use of multiple-input/single-output(MISO) mode1, the transmission paths of vibration within a reciprocating compressor have been investigated. In order to identify the transmission path, we measure the accelerations of the block and transverse vibrations of the line discharge tube. As outputs, vibrations of compressor shell were measured at three positions; cylinder head, one near the suction line, and the top of upper shell. The partial coherence function and transfer function are obtained ken the measured data, and the results are observed in order to determine vibration source and its influence on the shell vibration.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.7
• /
• pp.692-700
• /
• 2012

Vibration intensity has been used to localize vibration source of a vibrating system. Not only that, vibration intensity has also been used for structural diagnostic in identifying crack and mounted stiffeners. To clearly identify the location of vibration source and understand the changes of energy transmission path, clear flow visualization is required. Most of previous works used vectors to indicate the magnitude and direction of emerging vibration energy and transmission paths. However, due to the large surface area of a plate like-structure, clear transmission paths cannot be achieved using vector visualization. This becomes an issue when detail vector flow at all locations of the whole plate surface is required. In this study, streamlines visualization is used to clearly indicate the power flow transmission path at all plate surface. By using streamlines representation, not only clear transmission paths are obtained, but also improves the vector visualization which helps us to understand the changes of the energy flow especially for stiffened plates. In this study, vibration intensity computation is firstly compared to previous work to validate the vibration intensity computation. To clearly show the power flow transmission paths, streamlines representation is shown. This representation overcomes the unclear vector direction especially for stiffened plates. Different pattern of energy transmission path can be observed using streamlines representation for stiffened and unstiffened plate. The complex streamlines pattern can also be observed at high resonance frequencies which is unclear by using vector representation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.144-153
• /
• 2006

In this paper, we propose an efficient video data transmission protocol using the cross-layer approach in ad hoc networks. Due to node movement, the MANET is frequently changing path and each path has different transmission rate so that it has low performance when transmitters select a constant transmission late at the encoding time. Because MANET is running limited energy, efficient energy management is important because it increases network life time and network throughput. Therefore we need an effective video transmission method that considers physical layer channelstatistics, node's energy status, and network topology changes at the same time unlike the OSI recommendation protocol in that each layer isindependent and hard to transmit adaptively video data according to the network conditions. Therefore, in this paper we propose a cross-layer effective video transmission protocol and mechanism that can select an optimal path using multilayer information such as node's residual energy, channel condition and hop counts and can determine the adequate coding rate adaptively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.35-40
• /
• 2019

It is important to constantly provide service in real-time multimedia applications using multicast. Transmission path reconstruction occurs in hybrid multicast using Internet Protocol (IP) multicast and ALM in order to adapt the network status to things like congestion. So, there is a problem in which real-time QoS is reduced, caused by an increase in end-to-end delay. In this paper, we want to solve this problem through multi-layer transmission path construction. In the proposed method, we deploy the control server and application layer overlay host (ALOH) in each multicast domain (MD) for hybrid multicast construction. After the control server receives the control information from an ALOH that joins the MD, it makes a group based on the hop count and sends it to the ALOH in each MD. The ALOH in the MD performs the role of sending the packet to another ALOH and constructs the multi-layered transmission path in order of priority by using control information that is received from the control server and based on the delay between neighboring ALOHs. When congestion occurs in, or is absent from, the ALOH in the upper MD, the ALOH selects the path with the highest priority in order to reduce end-to-end delay. Simulation results show that the proposed method could reduce the end-to-end delay to less than 289 ms, on average, under congestion status.