• Applied Microscopy
• /
• 제48권4호
• /
• pp.126-127
• /
• 2018

Carbon has numerous allotropes and various crystalline forms with full dimensionalities such as diamond, graphite, fullerenes, and carbon nanotubes leading a wide range of applications. Since the emerge of graphene consisting of a single atomic layer of carbon atoms, a fabrication of all-carbon-based device with combination of one-, two-, and three-dimensional carbons has become a hot issue. Here, we introduce an ultimate one-dimensional carbon atomic chain. Carbon atomic chains were experimentally created by removing atoms from monolayer graphene sheet under electron beam inside transmission electron microscope (TEM). A series of TEM images demonstrate the dynamics of carbon atomic chains over time from the formation, transformation, and then breakage.

• 한국산업보건학회지
• /
• 제23권3호
• /
• pp.205-211
• /
• 2013

Objectives: 21 sepiolite substances produced in China were investigated for the presence of asbestos in their materials. Materials and methods: In order to identify asbestos in sepiolite substances, test materials were analyzed using a transmission electron microscope equipped with energy dispersive X-ray spectrometer (TEM-EDS) for confirming their shape and components (atomic %). Results: Five of 21 sepiolte substances were asbestos-containing materials. Two chrysotile containing sepiolite proved to be asbestoscontaining materials, as did two chrysotile mixed with tremolite containing sepiolite. 16 sepiolite substances did not contain asbestos materials. Conclusions: When importing sepiolite substances, they must be analyzed to determine if there is asbestos in their materials.

• 한국세라믹학회지
• /
• 제56권3호
• /
• pp.291-297
• /
• 2019

Pyrolytic carbon (PyC) layers were deposited using methane. The PyC layer deposited with 5% methane showed highly textured graphite, while that deposited using 100% methane showed low textured graphite. The degrees of anisotropy of the carbon layers were measured using an X-ray diffractometer, a transmission electron microscope, and a Raman spectroscope, and the results were compared with those reported previously. The orientation angles obtained from the fast Fourier transformation of the high-resolution transmission electron microscopy images and the I_D/I_G intensity ratios obtained from the Raman spectra were used to evaluate the anisotropy of the PyC layers.

• Korean Chemical Engineering Research
• /
• 제57권1호
• /
• pp.111-117
• /
• 2019

기상으로 전달된 Ti 전구체가 열 플라즈마에서 고순도의 결정질 코어-$TiO_2$로 합성됨과 동시에 기판에 바로 증착시킬 수 있는 공정을 제시한다. 제조된 코어-$TiO_2$는 외부에 노출되지 않는 상태에서 원자층증착법(Atomic Layer Deposition, ALD)에 의하여 $Al_2O_3$로 코팅된다. 코어-$TiO_2$와 코팅된 쉘-$Al_2O_3$의 형태학적 특징은 transmission electron microscope (TEM) 및 transmission electron microscope - energy dispersive spectroscopy (TEM-EDS)를 통해 분석하였다. 제조된 코어-$TiO_2$/쉘-$Al_2O_3$ 나노입자의 전기적 특성은 염료감응 태양전지(dye-sensitized solar cell, DSSC)의 작동전극에 적용하여 평가하였다. Dynamic light scattering system (DLS), scanning electron microscope (SEM), X-ray Diffraction (XRD)을 통하여 코어-$TiO_2$의 평균입도, 성장속도 및 결정구조의 무게분율을 분석한 결과, 평균입도는 17.1 nm, 코어박막의 두께는 $20.1{\mu}m$이고 주 결정구조가 Anatase로 증착된 코어-$TiO_2$/쉘-$Al_2O_3$ 나노입자를 적용한 DSSC가 기존의 페이스트 방식으로 제작한 DSSC보다 더 높은 광효율을 보여준다. 기존의 페이스트방식을 활용한 DSSC의 에너지변환효율 4.99%에 비하여 선택적으로 조절된 코어-$TiO_2$/쉘-$Al_2O_3$ 나노입자를 작동전극으로 사용한 경우가 6.28%로 26.1% 더 높은 광효율을 보여준다.

• 환경위생공학
• /
• 제1권1호
• /
• pp.31-40
• /
• 1986

It was observed by electron microscope (transmission electron microscope, Scanning electron microscope) as a study on microstructure of soybean after r-ray irradiation with the intensity of 5KGY, 7KGY, 10KGY and 15KGY, fermented with the named Bacillus subtilis SCF, which newly separated and identified. According to the progress fermentation, changes of soybean microstructure have been increased, especially irradiated soybeans more increased than non-irradiated them. Observation of microstructure by electron microscope showed that each protein body became more. expanded in the dimension and decomposed, spherosome around the protein body in unit area dispersed and dwindled in the numbers of it. As the fermentation on progress, changes of soybean microstructure were suitable on fermentation period of 7KGY soybean, 48-72hrs fermentation.

• 대한의생명과학회지
• /
• 제8권1호
• /
• pp.13-20
• /
• 2002

Asadisulphide were purified from Ferrula assafoetida by organic solvent extraction and chromatography. Since ethyl acetate extracts of F. assafoetida has the strongest inhibitory effects on adherence of HL-60 cells, it was reextracted with ethyl acetate, hexane, and ethyl ether and chromatographed three times to isolate asadisulphide. HL-60 cells were grouped into untreated control, TPA-treated, asadisulphide-teated and TPA＋asadisulphide-treated groups, and structural changes of these cells were observed using light microscope, scanning electron microscope and transmission electron microscope to examine the inhibitory effects of asadisulfide on the TPA-induced adherence of HL-60 cells. Light microscopic observations showed that asadisulphide has inhibitory effects on the cell aggregation, extention of cytoplasmic processes and inhibition of substrate adhesion of HL-60 cells. Using scanning and transmission electron microscope, it was observed that cell surfaces and several ultrastructures of TPA-treated HL-60 cell were different from control group, while there were no remarkable differences between asadisulphide-treated and TPA＋asadisulphide-treated group. These results could suggest that asadisulphide has the inhibitory effects on the TPA-induced structural changes of HL-60 cells.

• Applied Microscopy
• /
• 제45권4호
• /
• pp.203-207
• /
• 2015

Sample preparation is very important for crystal structure analysis of novel nanostructured materials in electron microscopy. Generally, a grid dispersion method has been used as transmission electron microscope (TEM) sampling method of nano-powder samples. However, it is difficult to obtain the cross-sectional information for the tabular-structured materials. In order to solve this problem, we have attempted a new sample preparation method using focused ion beam. Base on this approach, it was possible to successfully obtain the electron diffraction patterns and high-resolution TEM images of the cross-section of tabular structure. Finally, we were able to obtain three-dimensional crystallographic information of novel zeolite nano-crystal of the tabular morphology by applying the new sample preparation technique.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.3046-3054
• /
• 2013

Synthesis of Carbon Nanotube bundles has been achieved by simple and economical solvothermal procedure at very low temperature of $180^{\circ}C$. The product yield obtained was about 70-75%. The optimization of reaction conditions for an efficient synthesis of CNTs has been presented. The CNTs are obtained by reduction of hexachlorobenzene in the presence of Na/Ni in cyclohexane. The X-ray diffraction, Fourier transform infrared and Raman spectral studies have inferred us the graphene structure of the products. The CNTs formed as the bundles were viewed on scanning electron microscope, transmission electron microscope and high-resolution transmission electron microscope. These are the multiwalled CNTs with outer diameter of 5-10 nm, the inner diameter 2-4 nm and cross sectional diameter up to 5 nm. Brunauer-Emmett-Teller (BET) based $N_2$ gas adsorption studies have been made to obtain BET surface area and $H_2$ storage capacity. Effect of the experimental variables such as reaction temperature, amount of catalyst and the amount of carbon source were investigated. It is found that they affect significantly on the product nature and yield.

• 한국전기전자재료학회논문지
• /
• 제36권4호
• /
• pp.326-331
• /
• 2023

The utilization of scanning transmission electron microscopy (STEM) in conjunction with cathodoluminescence (CL) has emerged as a valuable tool for the investigation of material optical properties. In recent years, this technique has facilitated significant advancements in the fields of plasmonics and quantum emitters by surpassing prior technical restrictions. The review commences by providing an outline of the diverse STEM-CL operating modes and technical aspects of the instrumentation. The review explains the fundamental physics of light production under electron beam irradiation and the physical basis for interpreting STEM-CL experiments for different types of excitations. Additionally, the review compares STEM-CL to other related techniques such as scanning electron microscope CL, photoluminescence, and electron energy-loss spectroscopy.

• Applied Microscopy
• /
• 제48권2호
• /
• pp.49-53
• /
• 2018

A successful transmission electron microscope (TEM) analysis is closely related to the preparation of the TEM specimen and should be followed by the suitable TEM specimen preparation depending on the purpose of analysis and the subject materials. In the case of the Si-based anode material, lithium atoms of formed Li silicide were removed due to ion beam and electron beam during TEM specimen preparation and TEM observation. To overcome the problem, we proposed a new technique to make a TEM specimen without the ion beam damage. In this study, two types of test specimens from the Si-based anode material of Li-ion battery were prepared by respectively adopting the only focused ion beam (FIB) method and the new FIB-ultramicrotome method. TEM analyses of two samples were conducted to compare the Ga ion damage of the test specimen.