• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.235-243
• /
• 2007

Sensor network is used to obtain sensing data in various area. The interval to sense the events depends on the type of target application and the amounts of data generated by sensor nodes are not constant. Many applications exploit long sensing interval to enhance the life time of network but there are specific applications that requires very short interval to obtain fine-grained, high-precision sensing data. If the number of nodes in the network is increased and the interval to sense data is shortened, the amounts of generated data are greatly increased and this leads to increased amount of packets to transfer to the network. To transfer large amount of packets fast, it is necessary that the delay between successive packet transmissions should be minimized as possible. In Sensor network, since the Operating Systems are worked on the event driven, the Timer Event is used to transfer packets successively. However, since the transferring time of packet completely is varies very much, it is very hard to set appropriate interval. The longer the interval, the higher the delay and the shorter the delay, the larger the fail of transfer request. In this paper, we propose ESTEO which reduces the delay between successive packet transmissions by using SendDone Event which informs that a packet transmission has been completed.In ESTEO, the delay between successive packet transmissions is shortened very much since the transmission of next packet starts at the time when the transmission of previous packet has completed, irrespective of the transmission timee. Therefore ESTEO could provide high packet transmission rate given large amount of packets.

• Journal of Radiation Protection and Research
• /
• v.28 no.1
• /
• pp.59-63
• /
• 2003

Purpose : Measurement of transmission dose is useful for in vivo dosimetry of QA purpose. The objective of this study is to develope an algorithm for estimation of tumor dose using measured transmission dose for open radiation field. Materials and Methods : Transmission dose was measured with various field size (FS), phantom thickness (Tp), and phantom chamber distance (PCD) with a acrylic phantom for 6 MV and 10 MV X-ray Source to chamber distance (SCD) was set to 150 cm. Measurement was conducted with a 0.6 cc Farmer type ion chamber. Using measured data and regression analysis, an algorithm was developed for estimation of expected reading of transmission dose. Accuracy of the algorithm was tested with flat solid phantom with various settings. Results : The algorithm consisted of quadratic function of log(A/P) (where A/P is area-perimeter ratio) and tertiary function of PCD. The algorithm could estimate dose with very high accuracy for open square field, with errors within ${\pm}0.5%$. For elongated radiation field, the errors were limited to ${\pm}1.0%$. Conclusion : The developed algorithm can accurately estimate the transmission dose in open radiation fields with various treatment settings.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1399-1405
• /
• 2012

Transmission cross section characteristics as a measure of transmission efficiency has been analyzed numerically for the H-shaped and C-shaped small apertures in the infinite conducting plane when illuminated by a plane wave. It has been found that C-shaped aperture has the larger transmission cross section than that of H-shaped aperture under the condition of the same perforated aperture area. Main attention has been focused on studying the mutual coupling effect between two C-shaped apertures on the transmission cross section characteristic. Parallel configuration which is composed of two C-shaped apertures arranged along the x-axis and collinear configuration which is composed of two C-shaped arrayed along the y-axis have been investigated from the viewpoint of enhanced transmission cross section characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.224-229
• /
• 2018

Korea is experiencing a rapid increase in electricity consumption due to rapid economic development, and many power transmission towers are installed to provide smooth power supply. The high-voltage transmission line is mainly made of aluminum stranded wire, and the wire is loosely guided so that some deflection is maintained. The degree of deflection has a great influence on the quality of the construction and the life of the cable. As the time passes, the shrinkage and expansion occur repeatedly due to the weight of the cable and the surrounding environment. Therefore, periodic monitoring is essential for the management of the power transmission line. In this study, the power transmission lines were monitored using 3D laser scanning technology. The data of the power transmission line of the study area was acquired and the point cloud type 3D geospatial information of the transmission line was extracted through data processing. The length of the transmission line and deflection amount were calculated using the 3D geospatial information of the transmission line, and the distance from the surrounding obstacles could be calculated effectively. The result of study shows the utilization of 3D laser scanning technology for transmission line management. Future research will contribute to the efficiency of transmission line management if a transmission line monitoring system using 3D laser scanning technology is developed.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.83-89
• /
• 2013

Energy consumption is closely related to our lives. As Korea has four seasons, heating and cooling system is considered as essential facilities for the residential buildings. Accordingly, the government has continuously strengthened the design criteria to improve energy for new and existing building to save energy. The most important factor in the energy efficiency analysis for apartment is the heat transmission coefficient, and the value is significantly different as the heating energy amount is greatly different according to the window area ratio versus facade area ratio. Therefore, it is time to conduct continuous set-up for goal to enhance efficiency and restriction on window area ratio versus facade area ratio.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.6
• /
• pp.1-8
• /
• 2017

The purpose of this study was to provide basic data for development of environmental design technology for greenhouses constructed in reclaimed lands. We analyzed the climatic conditions around seven major reclaimed land areas in Korea, which have a plan to install advanced horticultural complexes. The characteristics of heating load through the thermal environment measurement of the greenhouse in Saemangeum were analyzed. The part to be applied to the environmental design of the greenhouses in reclaimed lands were reviewed. The overall heat transfer coefficient of the experimental greenhouse with the aluminum screen and multi-layer thermal curtain averaged $3.79W/m^2^{\circ}C$. It represents a 44 % heat savings rate compared with plastic greenhouses with a single covering, which was significantly lower than that of the common greenhouses with 2-layer thermal curtains. This is because the experimental greenhouse was installed on reclaimed land and wind was stronger than the inland area. Among the total heating load, the transmission heat loss accounted for 96.4~99.9 %, and the infiltration loss and the ground heat exchange were low. Therefore, it is necessary to take countermeasures to minimize the transmission heat loss for greenhouses constructed in reclaimed lands. As the reclaimed land is located on the seaside, the wind is stronger than the inland area, and the fog is frequent. Especially, Saemangeum area has 2.6 times stronger wind speed and 3.4 times longer fog duration than the inland area. In designing the heating systems for greenhouses in reclaimed lands, it is considered that the maximum heating load should be calculated by applying the wind coefficient larger than the inland area. It is reasonable to estimate the operation cost of the heating system by applying the adjustment factor 10 % larger than the average in calculating the seasonal heating load.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.374-376
• /
• 2005

Due to the pressure of opening electric power market, the transmission system reliability evaluation is being more important. This paper presents a reliability evaluation method for a specific area using the elastic power system frequency decline characteristic. The practicality and effectiveness of this methodology is illustrated by a case study.

• Korean Journal of Social Welfare
• /
• v.60 no.2
• /
• pp.53-76
• /
• 2008

This study analyze the intergenerational transmission of poverty in Korea, using the first wave of Korea Welfare Panel Study. For this analysis, I produced poverty transition tables across generation and estimated logistic models to explore the effects of parent's poverty on the children's adulthood poverty. As the results, I found that parent's poverty reduced children's education level and then the low education level increased the likelihood that children experience poverty in their adulthood. In other words, parent's poverty might increase children's adulthood poverty through the mediating effects of education level. This mediating effects were also identified in the analyses by group and cohort. From the analyses by group, daughters rather than sons, those from urban rather than rural area, and the older cohort rather than younger cohort showed greater intergenerational transmission of poverty.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1086-1103
• /
• 2004

Most research efforts on the OCDMA technology assume single-bit-per-symbol transmission techniques such as on-off keying. However, achieving high spectral efficiency with such transmission techniques is likely to be a challenging task due to the "unipolar" nature of optical signals. In this paper, an M-ary transmission technique using more than two equally-weighted codes is proposed for OCDMA local area networks, and ie BER performance and spectral efficiency are analyzed. Poison frame arrival and randomly generated codes are assumed for the BER analysis, and the probability of incorrect symbol detection is analytically derived. From the approximation, it is found that there exists an optimal code weight that minimizes the BER, and its physical interpretation is drawn in an intuitive and simple statement. Under the assumption of this optimized code weight and sufficiently large code dimension, it is also shown that the spectral efficiency of OCDMA networks can be significantly improved by increasing the number (M) of symbols used. Since the cost of OCDMA transceivers is expected to increase with the code dimension, we finally provide a guideline to determine the optimal number of symbols for a given code dimension and traffic load.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.9
• /
• pp.784-790
• /
• 2012

In this paper, we propose a upstream transmission method to extend coverage in visible light communication (VLC) systems. We extend transmission distance by using focused infrared(IR) light emitting diodes(LEDs). Since the focused light covers just limited area, it might have a difficulty in transmitting data if the transmitter and receiver are not properly aligned. To solve this problem, we arrange multiple IR-LEDs in different direction and select a single best performing IR-LED among multiple IR-LEDs. Also, the transmission performance is periodically checked and another IR-LED is reselected to support the required quality of service (QoS) and to minimize battery consumption required by a mobile terminal.