• Journal of Power Electronics
• /
• v.8 no.1
• /
• pp.35-50
• /
• 2008

A zero-voltage-transition (ZVT) pulse width modulated (PWM) converter is a PWM converter with a single main power switch that has an auxiliary circuit to help it turn on with zero-voltage switching (ZVS). There have been many ZVT-PWM converters proposed in the literature as they are the most popular type of ZVS-PWM converters. In this paper, the properties and characteristics of several types of ZVT-PWM converters are reviewed. A new type of ZVT-PWM converter is then introduced, and the operation of a sample converter of this type is explained and analyzed in detail. A procedure for the design of the converter is presented and demonstrated experimentally. The feasibility of the new converter is confirmed with results obtained from an experimental prototype. Conclusions on the performance of ZVT-PWM converters in general are made based on the efficiency results obtained from the experimental prototypes of various ZVT-PWM converters of different types.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.5
• /
• pp.559-566
• /
• 2006

In the real system application, the interacting multiple model (IMM) based algorithm requires less computing resources as well as a good performance with respect to the various target maneuverings. And it further requires an easy design procedure in terms of its structures and parameters. To solve these problems, a fuzzy interacting multiple model (FIMM) algorithm, which is based on the basis sub-models defined by considering the maneuvering property and the time-varying mode transition probabilities designed by using the mode probabilities as inputs of a fuzzy decision maker, is proposed. To verify the performance of the proposed algorithm, airborne target tracking is performed. Simulation results show that the FIMM algorithm solves all problems in the real system application of the IMM based algorithm.

• Journal of the Korean Chemical Society
• /
• v.8 no.2
• /
• pp.62-64
• /
• 1964

The cation exchange chromatographic studies for the analysis of transition metals have been described. The quantitative separation of a mixture of Fe(Ⅲ), Cu(II), Zn(II), Ni(II), Cd(II), Co(II) and Mn(II) has been obtained by elution, through a 28cm column of the resin, Dowex 50 ${\times}$ 4 (100∼200 mesh), using 0.45 M $NaNO_3$+0.05 M Na-tartrate solution as eluent, starting with the eluent of pH 3.5, followed stepwise by pH 4.0 and 4.5. A comparison between the calculated and the observed peak positions in the elution curve has been shown. The relative stability constants for tartrate complexes of some transition metals have been calculated by using distribution ratios obtained in this separation procedure.

• IE interfaces
• /
• v.13 no.4
• /
• pp.694-702
• /
• 2000

For the graceful transition from the analog to digital TV systems, a systematic frequency assignment scheme must be incorporated into the transition planning procedure. In this study, we have studied the frequency assignment methodology for the efficient management of the limited spectrum resources. By applying the graph-theoretic approach, this study developed a new solution method for additional frequency assignment problem whose objective is to assign available frequencies for newly generated requirements (digital TV stations) with minimum reassignment of the preassigned frequencies to LPTV stations while meeting the interference-related constraints. The proposed algorithm can be effectively applied not only to the current digital TV introduction phase but also to the development phase with some further development. This study can be utilized as the basis for the future study on frequency assignments that aims at graceful transition from analog TV to digital TV.

• Journal of computational fluids engineering
• /
• v.17 no.1
• /
• pp.54-60
• /
• 2012

Transition prediction results are validated with experimental data obtained from a transonic wind tunnel for the KU109C airfoil. A Reynolds-Averaged Navier-Stokes code is simultaneously coupled with the transition transport model of Langtry and Menter and applied to the numerical prediction of aerodynamic performance of the KU109C airfoil. Drag coefficients from the experiment are better correlated to the numerical prediction results using a transition transport model rather than the fully turbulent simulation results. Maximum lift coefficient and drag divergence at the zero-lift condition with Mach number are investigated. Through the present validation procedure, the accuracy and usefulness of both the experiment and the numerical prediction are assessed.

• Advances in pediatric surgery
• /
• v.4 no.2
• /
• pp.172-175
• /
• 1998

With the recent advances in instruments and techniques, laparoscopic procedure have extended to neonates with congenital anomalies. The author reports a 6-day-old boy with Hirschsprung's disease, treated successfully by the laparoscopic endorectall pull-through procedure. The technique and its potential role in the treatment of Hirschsprung's disease are described. One camera port and three working ports were used for access to the peritoneal cavity. The descending and sigmoid colon were mobilized laparoscopically. The submucosal dissection was done transanally. The colon was then pulled down in continuity, divided above the transition zone, and secured to the anal mucosa about 10 mm above the pectinate line. Author concluded that endorectal pull-through can be performed safety with the laparoscope.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.531-536
• /
• 2002

Silica fume influences concrete diffusivity and permeability as well as strength by densifying the microstructure of the interfacial transition zone (ITZ) of high strength concrete, by reducing the capillary porosity of cement paste and by producing less diffusible and permeable pozzolanic CSH gel than CSH gel of conventional cement hydration. This paper presents a procedure to predict the chloride ion diffusivity and water permeability of the high strength concrete containing silica fume. Water binder ratio, silica fume addition, degree of hydration and volume fraction of aggregates are considered as the major factors influencing concrete diffusivity and permeability in the procedure. Analytical results using the procedure are shown and verified with other data.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.89-92
• /
• 2000

In this paper, an effective procedure is presented for the local recovery of displacements and stresses in multilayered composite panels, which incorporate the local refinement using mesh superposition. The mesh superposition method is used to refine the global coarse mesh by superimposing refined mesh to the localized zone of interest without transition zones. The finite element model used is a solid element based on the Hellinger-Reissner variational principle. The a posteriori computation of the through-the-thickness distributions of displacements and stresses is achieved using a predictor-corrector procedure. The procedure utilizes the superconvergent stresses and nodal displacements of the finite element patch. The element patch is generated by locally superimposing a refined local mesh to the coarse global mesh.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.199-208
• /
• 1994

This paper proposes a delay fault test technique for ICs and PCBs with the boundary-scan architectures supporting ANSI/IEEE Std 1149.1-1990. The hybrid delay fault model, which comprises both of gate delay faults and path delay faults, is selected. We developed a procedure for testing delay faults in the circuits with typical boundary scan cells supporting the standard. Analyzing it,we concluded that it is impractical because the test clock must be 2.5 times faster than the system clock with the cell architect-ures following up the state transition of the TAP controller and test instruction set. We modified the boundary-scan cell and developed test instructions and the test procedure. The modified cell and the procedure need test clock two times slower than the system clock and support the ANSI/IEEE standard perfectly. A 4-bit ALU is selected for the circuits under test. and delay tests are simulated by the SILOS simulator. The simulation results ascertain the accurate operation and effectiveeness of the modified mechanism.

• Structural Engineering and Mechanics
• /
• v.4 no.6
• /
• pp.601-612
• /
• 1996

To simulate the large-scale failure evolution with current computational facilities, a simple approach, that catches the essential feature of failure mechanisms, must be available so that the routine use of failure analysis is feasible. Based on the previous research results, a simple analysis procedure is described in this paper for failure simulation. In this procedure, the evolution of localization is represented by a moving surface of discontinuity, and the transition between continuous and discontinuous failure modes are described via the moving jump forms of conservation laws. As a result, local plasticity and damage models, that are formulated based on thermodynamic restrictions, are still valid without invoking higher order terms, and simple integration schemes can be designed for the rate forms of constitutive models. To resolve localized large deformations and subsequent cracking, an efficient structural solution scheme is given for Static and dynamic problems.