• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.465-469
• /
• 2003

Microlens arrays were fabricated using a novel fabrication technology based on the exposure of a PMMA (Polymethylmethacrylate) sheet to deep X-rays and subsequent thermal treatment. X-ray irradiation causes the decrease of molecular weight of PMMA, which in turn decreases the glass transition temperature and consequently causes a net volume increase during the thermal cycle resulting in a swollen microlens. A new physical modeling and analyses for microlens formation were presented according to experimental procedure. A simple analysis based on the new model is found to be capable of predicting the shapes of microlens which depend on the thermal treatment. For the replication of microlens arrays having various diameters with different foci on the same surface, the hot embossing and the microinjection molding processes has been successfully utilized with a mold insert that is fabricated by Ni-electroplating based on a PMMA microstructure of microlenses. Fabricated microlenses showed good surface roughness with the order of 1 nm.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.263-270
• /
• 1996

본 연구에서는 여러개의 원판형 압전소자가 부착된 판구조물의 소음제어를 다루었다. 판재의 아래에는 소음원이 위치하고 이 소음원은 판재를 가진한다. 구조물 및 압전소자는 3차원 요소, 구조물 요소 및 천이요소의 조화로 이루어지는 유한요소로 모델링 되었다. 최적화 과정의 목적함수는 구조물로부터 복사되는 소음 에너지이고 설계변수는 원판형 압전소자의 위치, 크기 및 인가되는 전압이 사용되었다. 최적설계과정에서 요구되는 자동격자형성이 언급되었다. 구조물의 공진 및 비공진 주파수에서 최적설계가 행해졌으며 괄목할 만한 소음감소를 얻었다. 이 결고는 음향 하중의 형태가 다르게 변하더라도 크게 변하지 않는 것이 밝혀졌다. 또한 한 주파수 뿐 아니라 넓은 주파수 영역에서도 압전가진기의 전압을 조정함으로써 좋은감소를 얻을 수 있다.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제18권1호
• /
• pp.47-56
• /
• 2018

Background: The purpose of this study is to investigate the effects of administration order when a sedative drug (midazolam) and an opioid analgesic drug (fentanyl) is applied for moderate intravenous (IV) sedation in dentistry. Methods: A retrospective chart review was conducted in one dental clinic during its transition from a midazolam-first to a fentanyl-first protocol for dental procedures requiring moderate IV sedation. Physiological parameters, drug administration times, patient recovery times, drug dosages, and patient recall and satisfaction were investigated for differences. Results: A total of 76 charts (40 midazolam-first and 36 fentanyl-first administrations), were used in the analysis. Administering midazolam first resulted in an average 4.38 min (52%) decrease in administration times (P < 0.001), and a decrease in procedural recollection immediately following the procedure (P = 0.03), and 24 to 48 hours later (P = 0.009). Administering fentanyl first required an average of 2.43 mg (29%) less midazolam (P < 0.001). No significant differences were found for change in vital signs, minimum oxygen saturation levels, recovery times, and patient satisfaction (P > 0.05). Oxygen saturation levels did not drop below 90% for either group; however, 5 cases in the fentanyl-first group fell to between 90% and 92%, compared with 0 cases in the midazolam-first group. Conclusions: The administration order of fentanyl and midazolam may have different effects on patients and the sedation procedure. Findings from this study should be used to facilitate discussion among dental practitioners and to guide additional research investigating this topic.

• Steel and Composite Structures
• /
• 제44권2호
• /
• pp.271-281
• /
• 2022

This study discusses challenges of running expandable profile liners (EPLs) to isolate trouble zones in directional section of a deep well, and summary the expandable profile liner technology (EPLT) field trial experience. Technically, the trial result reveals that it is feasible to apply the EPLT solving lost-circulation control problem and wellbore instability in the deep directional section. Propose schemes for optimizing the EPLT operation procedure to break through the existing bottleneck of EPLT in the deep directional section. Better-performing transition joints are developed to improve EPL string reliability in high borehole curvature section. High-performing and reliable expanders reduce the number of trips, offer excellent mechanical shaping efficiency, simplify the EPLT operation procedure. Application of the expansion and repair integrated tool could minimize the risk of insufficient expansion and increase the operational length of the EPL string. The new welding process and integrated automatic welding equipment improve the welding quality and EPL string structural integrity. These optimization schemes and recent new advancements in EPLT can bring significant economic benefits and promote the application of EPLT to meet future challenges.

• Restorative Dentistry and Endodontics
• /
• 제36권5호
• /
• pp.377-384
• /
• 2011

연구목적: 본 연구의 목적은 열연화주입형 gutta percha와 resilon의 온도 변화에 따른 점탄성 변화를 관찰하고 조작성을 비교하기 위함이다. 연구 재료 및 방법: Obtura-II 시스템을 이용하여 세 종류의 gutta percha와 resilon을 $140^{\circ}C$와 $200^{\circ}C$로 가열한 후 사출 온도를 측정하였다. 점도계를 이용하여 온도 변화에 따른 재료들의 점탄성 특성(전단탄성계수, G'; 전단점성계수, G"; 손실 탄젠트, tan${\delta}$; 복소점도, ${\eta}^*$)을 관찰하였다. 점도계와 차동주사열측정기(DSC)로 재료들의 상전이 온도를 측정하였고 가압법으로 $60^{\circ}C$와 $40^{\circ}C$에서 재료들의 점조도를 비교하였다. 결과: 세 종의 gutta perchas는 온도에 따라 서로 다른 점탄성 특성을 나타냈다. $40-50^{\circ}C$에서 연화된 재료의 고체화 상변이가 일어났고, 점도계와 DSC로 측정된 상변이 시작 온도는 유사하였다. 상변이 시작 온도와 가압 시 점조도는 재료들마다 차이를 보였다(p < 0.05). Resilon은 gutta percha와 비슷한 유변학적 특성을 보였다. 결론: 열연화된 근관충전재는 냉각과정 동안 유변학적 특성의 변화를 나타냈고 재료들마다 서로 다른 점탄성 특성은 근관 내주입 시와 충전 시 서로 다른 조작성을 보임을 알 수 있다.

• 폴리머
• /
• 제29권6호
• /
• pp.575-580
• /
• 2005

하이드록시 말단의 지방족 고차가지구조 폴리에스테르를 용융축합법을 이용하여 합성하였다. 말단의 하이드록시 그룹을 acryloyl chloride를 사용하여 비닐 말단으로 변환시켰으며, 말단변화에 따른 구조를 분석하고 분자량을 측정하였다. 비닐 말단의 지방족 고차가지구조 폴리에스테르는 점도가 높고 노란색의 투명한 액체이며, 하이드록시 말단의 지방족 고차가지구조 폴리에스테르에 비해 유리전이온도가 낮았다. 또한 비닐 말단으로 변형한 후에는 열안정성이 감소하였으며, 말단 작용기의 전환율 차이에 의해 불규칙적인 열분해거동을 보였다.

• ETRI Journal
• /
• 제26권6호
• /
• pp.520-534
• /
• 2004

As the density of memories increases, unwanted interference between cells and the coupling noise between bit-lines become significant, requiring parallel testing. Testing high-density memories for a high degree of fault coverage requires either a relatively large number of test vectors or a significant amount of additional test circuitry. This paper proposes a new tiling method and an efficient built-in self-test (BIST) algorithm for neighborhood pattern-sensitive faults (NPSFs) and new neighborhood bit-line sensitive faults (NBLSFs). Instead of the conventional five-cell and nine-cell physical neighborhood layouts to test memory cells, a four-cell layout is utilized. This four-cell layout needs smaller test vectors, provides easier hardware implementation, and is more appropriate for both NPSFs and NBLSFs detection. A CMOS column decoder and the parallel comparator proposed by P. Mazumder are modified to implement the test procedure. Consequently, these reduce the number of transistors used for a BIST circuit. Also, we present algorithm properties such as the capability to detect stuck-at faults, transition faults, conventional pattern-sensitive faults, and neighborhood bit-line sensitive faults.

• Bulletin of the Korean Chemical Society
• /
• 제23권1호
• /
• pp.81-85
• /
• 2002

A new di-N-cyanoethylated 14-membered tetraaza macrocycle 1,8-bis(2-cyanoethyl)-3,5,7,7,10,12,14,14-octamethyl-1,4,8,11-tetraazacyclotetradecane $(L^2)$ and its nickel(II) complex $[NiL^2(OAc)]^+$ have been prepared. The square-planar complex $[NiL^2](C IO_4)_2$ can be prepared by addition of $HClO_4$ to a hot aqueous solution of $[NiL^2(OAc)]^+$ The Ni-N (tertiary amino group) bond distances $(2.008{\AA})$ of $[NiL^2](C IO_4)_2$ are relatively long, and the complex exhibits a d-d transition band at unusually long wavelength (ca. 515 nm). The complex $[NiL^2](C IO_4)_2$ rapidly reacts with acetate ion or ethylenediamine (en) to produce $[NiL^2(OAc)]^+$ or [Ni(en)_3]^{2+}$, respectively, and is readily decomposed in NaOH (0.01 M) solution. The chemical properties of $[NiL^2]^{2+}$ as well as its synthetic procedure are quite different from those for other related 14-membered tetraaza macrocyclic complexes. Effects of the N-cyanoethyl and C-methyl groups on the properties of $L^2$.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권4호
• /
• pp.1887-1898
• /
• 2018

In this paper, a method to classify insider threat activity is introduced. The internal threats help detecting anomalous activity in the procedure performed by the user in an organization. When an anomalous value deviating from the overall behavior is displayed, we consider it as an inside threat for classification as an inside intimidator. To solve the situation, Markov Chain Model is employed. The Markov Chain Model shows the next state value through an arbitrary variable affected by the previous event. Similarly, the current activity can also be predicted based on the previous activity for the insider threat activity. A method was studied where the change items for such state are defined by a transition probability, and classified as detection of anomaly of the inside threat through values for a probability variable. We use the properties of the Markov chains to list the behavior of the user over time and to classify which state they belong to. Sequential data sets were generated according to the influence of n occurrences of Markov attribute and classified by machine learning algorithm. In the experiment, only 15% of the Cert: insider threat dataset was applied, and the result was 97% accuracy except for NaiveBayes. As a result of our research, it was confirmed that the Markov Chain Model can classify insider threats and can be fully utilized for user behavior classification.

• Corrosion Science and Technology
• /
• 제13권5호
• /
• pp.186-194
• /
• 2014

Establishment of adhesion strength measurement procedure for marine epoxy coatings was conducted in order to ensure reliability of the test results. It was found that (1) the increase in thickness of the substrates would induce increase of pull-off strength. Especially, the increase in adhesion strength with the substrate thickness increment was attributed to the transition of stress mode to the pure tensile mode excluding bending effect. (2) The longer curing time, the higher pull-off strength. It may be due to higher cross-linking density of the coating (3) The pull-off strength increases as coating thickness increases due to the diminishment of bending effect (4) The longer drying time after water immersion, the higher pull-off strength. It may be due to the evaporation of water molecule at the coating-substrate interface.