• 제목/요약/키워드: Transition Turbulence Model

검색결과 74건 처리시간 0.023초

정익과 동익의 상호작용에 의한 비정상 천이 경계층 유동의 수치해석에 관한 연구 1

  • 강동진
    • 대한기계학회논문집B
    • /
    • 제22권6호
    • /
    • pp.757-770
    • /
    • 1998
  • A Navier-Stokes code with a low Reynolds number k-.epsilon. turbulence model was tested to investigate its predictability for the unsteady transitional boundary layer flow due to rotor-stator interaction. A preliminary calculation with three different numbers of time steps 300, 600, and 1000 for a rotor wake passing period was carried out to see the effects of time steps on the unsteady flow and pressure fields due to rotor-stator interaction. Numerical solutions showed that unsteady pressure was much more sensitive to the number of time steps and over 600 time steps should be used to get a numerical solution independent of the number of time steps for a rotor wake passing period. The original low Reynolds number k-.epsilon. turbulence model showed very poor prediction of the unsteady transitional boundary layer flow due to rotor-stator interaction. This was due to the excessive production of turbulent kinetic energy near the leading edge. A modification suggested by Launder was incorporated and the modified model captured well the wake induced transitional strip. Present solutions also showed improved prediction over previous Euler/boundary layer solution in terms of the onset of unsteady transition and its extent.

Prandtl 수에 따른 옵셋 스트립 핀에서의 열 및 유동 분석 (Thermo-Flow Analysis of Offset-Strip Fins according to Prandtl Number)

  • 주윤식;공동현;이관수
    • 설비공학논문집
    • /
    • 제21권6호
    • /
    • pp.340-346
    • /
    • 2009
  • This paper numerically investigates thermo-flow characteristics of offset strip fins to obtain a correlation between heat transfer and pressure drop. The flow was divided into three regimes, i.e. laminar, transition and turbulent. The predicted j and f values from the SST k-$\omega$ turbulence model agreed with previous correlations with the error less than 20% in transition and turbulent regimes. Heat transfer and pressure drop were predicted by varying Prandtl number from 0.5 to 40. The Prandtl number showed little effects on pressure drop but had great effect on the heat transfer characteristics. An overall correlation to predict j was suggested by incorporating the effect of Pr and a new j correlation was suggested for each Pr.

옵셋 스트립 핀에서의 열전달 및 압력 강하 상관식 (Correlations of Heat Transfer and Pressure Drop for Offset Strip Fins)

  • 김민수;이관수
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회B
    • /
    • pp.2274-2279
    • /
    • 2008
  • This paper numerically investigates thermo-flow characteristics of offset strip fins to obtain a correlation of heat transfer and pressure drop. The flow is divided into three regimes, i.e. laminar, transition and turbulent. The predicted j and f values from the SST k-w turbulence model agree with previous correlations with the error less than 20% in transition and turbulent regimes. Prandtl number is varied from 0.5 to 40 and a correlation to predict heat transfer and pressure drop for offset strip fins is suggested.

  • PDF

Plandtl 수에 따른 옵셋 스트립핀에서의 열 및 유동 분석 (Thermo-Flow Analysis of Offset-strip fins according to Prandtl Number)

  • 주윤식;김민수;이관수
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 동계학술발표대회 논문집
    • /
    • pp.233-238
    • /
    • 2008
  • This paper numerically investigates thermo-flow characteristics of offset strip fins to obtain a correlation between heat transfer and pressure drop. The flow was divided into three regimes, i.e. laminar, transition and turbulent. The predicted j and f values from the SST k-$\omega$ turbulence model agreed with previous correlations with the error less than 20% in transition and turbulent regimes. Heat transfer and pressure drop were predicted by varying Prandtl number from 0.5 to 40. The Prandtl number showed little effects on pressure drop but had great effect on the heat transfer characteristics. An overall correlation to predict j was suggested by incorporating the effect of Pr and a new j correlation was suggested for each Pr.

  • PDF

k-𝜔 SST 모형을 이용한 수중도수와 잠긴흐름의 수치모의 (Numerical simulation of submerged jump and washed-out jump using the k-𝜔 SST model)

  • 최성욱;최성욱
    • 한국수자원학회논문집
    • /
    • 제54권11호
    • /
    • pp.1011-1019
    • /
    • 2021
  • 본 연구에서는 제방 형태의 보를 월류하는 수중도수와 잠긴흐름을 수치모의 하였다. 수치모의를 위하여 URANS 방정식을 해석하였으며, 난류폐합식으로 k-𝜔 모형을 사용하였다. 기존의 실험결과를 이용하여 수치모형을 검증하였는데, 모의된 롤러의 형상, 자유수면, 그리고 평균유속분포가 실험결과와 비교적 잘 일치하는 것을 확인하였다. 수중도수와 잠긴흐름에서 물의 체적비 분포를 비교하였으며, 각 흐름에 대한 2중 평균된 체적비의 특성을 제시하였다. 수치모의를 이용하여 보의 길이, 유량, 그리고 하류 수위에 따라 수중도수에서 잠긴흐름으로 천이되는 조건을 검토하였으며, 천이가 발생할 때의 상대 월류수심을 침수비의 함수로 제시하였다.

극 초음속 경계층 해석을 위한 γ-Reθt모델 개선 연구 (A Study on Improvement γ-Reθt Model for Hypersonic Boundary Layer Analysis)

  • 강선오;오세종;박동훈
    • 한국항공우주학회지
    • /
    • 제48권5호
    • /
    • pp.323-334
    • /
    • 2020
  • 경계층 천이는 극초음속 비행체의 열공력 성능에 직접적인 영향을 미치기 때문에, 성능 해석과 설계를 위해 천이지점의 정확한 예측 능력이 필수적으로 요구된다. 본 연구에서는 극초음속 경계층 천이 예측을 위한 γ-Reθt 모델을 개선하고 검증하였다. 천이 시작 위치 결정에 영향을 주는 간헐도 수송방정식 생성항의 계수를 압축성 경계층 상사해를 기반으로 마하수와 벽면온도, 자유류 정체온도 등에 대한 함수 형태로 구성하고 적용하였다. 기본 모델의 Reθc와 Flength 상관관계식에 마하수에 따른 천이 시작 운동량두께 레이놀즈수와 천이구간의 길이 변화를 반영할 수 있도록 마하수에 대한 관계식을 추가로 결정하여 적용하였다. 실용적인 사용을 고려하여 제안 모델을 상용 CFD 코드에 적용하였으며, 검증을 위해 모델을 사용하여 극초음속 평판과 원뿔 경계층 해석을 수행하였다. 실험 결과와의 비교를 통해 마하수와 단위 레이놀즈수 변화에 대한 개선된 예측성능을 확인하였다.

천이효과를 고려한 BWB UCAV 형상의 공력 특성 전산해석 (CFD Analysis of Aerodynamic Characteristics of a BWB UCAV configuration with Transition effect)

  • 조영희;장경식;신동진;박수형
    • 한국항공우주학회지
    • /
    • 제42권7호
    • /
    • pp.535-543
    • /
    • 2014
  • 비세장형, 둥근 앞전을 가지고 스팬이 1.0m로 축소된 BWB형 UCAV에 대해 완전난류, 천이 모델을 사용하여 전산해석을 수행하였다. 자유류는 받음각 -4도부터 26도까지 50m/s이며, 평균 시위 기준 레이놀즈수는 $1.25{\times}10^6$이다. 멀티블록 6면체 격자와 함께 완전난류 모델과 천이 모델의 결과를 비교하여 천이효과가 공력 특성에 미치는 영향을 살펴보았다. 풍동 실험과 비교한 결과 양/항력 계수는 해석범위 내에서 잘 일치하였으며, 피칭 모멘트는 높은 받음각에서 작게 예측됨과 동시에 난류모델에 따라 결과가 크게 달라졌다. 압력분포와 skin friction line, 축 방향 속도장을 이용하여 와류구조의 거동과 천이현상이 미치는 영향을 살펴본 결과, 천이효과를 고려하는 것이 UCAV의 정확한 와류 구조와 공력특성 예측에 필요한 것으로 확인하였다.

Probing the Conditions for the Atomic-to-Molecular Transition in the Interstellar Medium

  • Park, Gyueun;Lee, Min-Young
    • 천문학회보
    • /
    • 제46권1호
    • /
    • pp.50.2-51
    • /
    • 2021
  • Stars form exclusively in cold and dense molecular clouds. To fully understand star formation processes, it is hence a key to investigate how molecular clouds form out of the surrounding diffuse atomic gas. With an aim of shedding light in the process of the atomic-to-molecular transition in the interstellar medium, we analyze Arecibo HI emission and absorption spectral pairs along with TRAO/PMO 12CO(1-0) emission spectra toward 58 lines of sight probing in and around molecular clouds in the solar neighborhood, i.e., Perseus, Taurus, and California. 12CO(1-0) is detected from 19 out of 58 lines of sight, and we report the physical properties of HI (e.g., central velocity, spin temperature, and column density) in the vicinity of CO. Our preliminary results show that the velocity difference between the cold HI (Cold Neutral Medium or CNM) and CO (median ~ 0.7 km/s) is on average more than a factor of two smaller than the velocity difference between the warm HI (Warm Neutral Medium or WNM) and CO (median ~ 1.7 km/s). In addition, we find that the CNM tends to become colder (median spin temperature ~ 43 K) and abundant (median CNM fraction ~ 0.55) as it gets closer to CO. These results hints at the evolution of the CNM in the vicinity of CO, implying a close association between the CNM and molecular gas. Finally, in order to examine the role of HI in the formation of molecular gas, we compare the observed CNM properties to the theoretical model by Bialy & Sternberg (2016), where the HI column density for the HI-to-H2 transition point is predicted as a function of density, metallicity, and UV radiation field. Our comparison shows that while the model reproduces the observations reasonably well on average, the observed CNM components with high column densities are much denser than the model prediction. Several sources of this discrepancy, e.g., missing physical and chemical ingredients in the model such as the multi-phase ISM, non-equilibrium chemistry, and turbulence, will be discussed.

  • PDF

축대칭 초음속 제트에서 스크리치 모드 전이현상의 수치적 연구 (Numerical Investigation on the Mechanism of Mode Transition in Axi-symmetric Supersonic Jet Screech)

  • 빈종훈
    • 한국항공우주학회지
    • /
    • 제38권8호
    • /
    • pp.790-797
    • /
    • 2010
  • 마하수 1.0~1.2 범위의 초음속 제트에서 발생되는 축대칭 스크리치 톤 소음의 모드 전이 현상이 수치적으로 분석되었다. 이를 위해 k-e 난류모델을 가진 축대칭 Navier-Stokes 방정식이 사용되었으며 수치기법으로서 공간에 대해 소산관계보존기법과 시간에 대해 최적화된 4단계 시간 적분법이 사용되었다. 특히 낮은 마하수에서 발생하는 축대칭 A1 모드의 경우, 비선형성에 기인한 부가적인 음향파 발생을 확인하였으며, 강한 와류의 발생으로 인해 스크리치 소음 주파수는 와류 통과 주파수와 일치함을 알게 되었다.

난류 흐름의 RANS 수치모의를 위한 벽함수 성능 평가 (An evaluation of wall functions for RANS computation of turbulent flows)

  • 유동근;백중철
    • 한국수자원학회논문집
    • /
    • 제53권1호
    • /
    • pp.1-13
    • /
    • 2020
  • 높은 레이놀즈수를 갖는 공학적인 흐름을 예측하는 가장 일반적인 방법은 여전히 벽함수를 이용하는 난류모형에 근거한 RANS 수치모의이다. 최근 벽근처의 점성영역 관계식과 벽에서 떨어진 대수영역 관계식을 혼합하여 개발된 일반화된 벽함수들은 두 영역사이의 난류량과 유속이 부드럽게 천이하도록 한다. 이 연구는 난류운동에너지(TKE), 에너지 소산율, 비소산율, 와점성에 대해서 적용 가능한 벽함수들을 조합하여 일련을 수치 모의를 수행하여 널리 이용되고 있는 난류모형들의 성능과 수렴 특성을 분석하였다. 이 연구 결과는 RNG k-𝜖 모형의 경우 첫번째 계산격자가 완충층에 놓이게 될 때는 반복 계산시 작은 허용오차를 이용하여 주의 깊게 적용을 하여야 안정된 해를 구할 수 있음을 보여준다. 표준 k-𝜖과 RNG k-𝜖 모형은 TKE와 와점성에 대해서 적용 가능한 벽함수들 중 어느 것을 선택하여 적용하더라도 수치모의 결과가 민감하게 반응하지 않는 것으로 나타났다. 한편, k-ω SST 모형의 경우 TKE에 대해서는 kL-벽함수 그리고 와점성에 대해서는 nutUB-벽함수를 이용하여야 정확하고 안정된 경계 조건 설정을 보장할 수 있다. 레이놀즈수 155,000조건에서 적용한 후방계산흐름 수치모의 결과 격자 해상도에 상관없이 약 13% 정도 재부착 거리를 과소평가하는 모형을 제외하고 나머지 적용한 난류모형들 모두 적절히 세밀한 해상도의 격자에서 양호하게 재부착거리를 잘 예측하는 것으로 나타났다.