• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.163-169
• /
• 2003

Modeling of engine-generator system and its control responses are investigated using high performance generator controller. The nonlinear engine is modeled using mean torque production model based on experimental engine map. In case of diesel engine. the amount of injected fief is decided by engine controller depending on the APS(Acceleration Position Sensor) value. An electromechanical generator model contains electrical circuits and moment of inertia. The generator controller maximizes the performance of generator using decoupling and linearized current feedback control. The generator control system consists of 3-phase IGBT inverter and controller board based on 32 bit floating point DSP. Field oriented control algorithm with digital current feedback control at 10kHz sampling enabled high performance torque and speed control of induction machine. Not only the steady state but also the transient state responses can be evaluated through a batch test of the engine generator system. Developed engine and generator modeling and control can be utilized in various applications such as Series Hybrid Electric Vehicle(SHEV), engine-generator for emergency, and other hybrid generation systems.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.748-752
• /
• 2004

Fluid dynamic bearings (FDBs) have been replacing ball bearings of the HDD spindle motor very rapidly. But there are several demerits of HDB, such as high friction torque, variable viscosity of the fluid lubricant depending on operating temperature, low stiffness, and etc. Eccentricity is one of the major parameters which affects the static and dynamic characteristics. As the static eccentricity is larger, the stiffness and the damping coefficients become bigger. But friction torque is relatively unaffected by the static eccentricity. This research proposes a new type of journal bearing with asymmetric journal grooves which results in better dynamic characteristics. The static and dynamic characteristics of the new journal bearing are investigated by solving the Reynolds' equation with FEM, and the transient analysis is performed to predict the dynamic behavior of rotor by solving the equations of motion of a HDD spindle system with Runge-Kutta method. The result shows that the proposed Journal bearings have much bigger stiffness and damping coefficients compared with the conventional symmetric ones. And consequently, it has smaller whirl radius and tilting angle.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권6호
• /
• pp.782-793
• /
• 2018

A small-scale horizontal axis hydrokinetic turbine is designed, manufactured and studied both experimentally and numerically in this study. The turbine is expected to work in most of China's sea areas where the ocean current velocity is low and to supply electricity for remote islands. To improve the efficiency of the turbine at low flow velocities, a magnetic coupling is used for the non-contacting transmission of the rotor torque. A prototype is manufactured and tested in a towing tank. The experimental results show that the turbine is characterized by a cut-in velocity of 0.25 m/s and a maximum power coefficient of 0.33, proving the feasibility of using magnetic couplings to reduce the resistive torque in the transmission parts. Three dimensional Computational Fluid Dynamics (CFD) simulations, which are based on the Reynolds Averaged Navier-Stokes (RANS) equations, are then performed to evaluate the performance of the rotor both at transient and steady state.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권10호
• /
• pp.562-570
• /
• 1999

In the industrial motor drive system which is composed of a motor and load connected with a flexible shaft, a torsional vibration is often generated because of the elastic elements in torque transmission. This vibration, which is generated in a two-mass mechanical system. To solve this problem, recently there has been a lot of researches for the robust control relevant to the $H_{\infty}$ control suppressing the torsional vibration and rejecting the torque disturbance. In the case of the $H_{\infty}$controller, however, the command tracking property becomes worse because of overshoot during transient response. For this reason the $H_{\infty}$ controller, which includes the two-degrees-of-freedom(TDOF) controller, is designed in order to improve command tracking property. However, it also includes complexity realizing this controller. In this paper, a new $H_{\infty}$ controller with partial state feedback is proposed. Proposed $H_{\infty}$controller has simple structure but satisfies with the fast command tracking property and the attenuation of disturbances and vibrations simultaneously, just like the complicated TDOF $H_{\infty}$ controller.

• 한국항공우주학회지
• /
• 제35권4호
• /
• pp.316-322
• /
• 2007

정유압 방식 EHA는 종래의 밸브 제어 방식 전기유압 구동장치와 전혀 다른 특성을 나타낸다. 본 논문에서는 EHA의 비선형 요소를 포함한 수학적 모델을 유도하고 실험적으로 검증하였다. 이 수학적 모델을 근거로 전기 모터로 구동되는 유압 펌프, 파이프 배관 그리고 유압 실린더로 구성되는 EHA의 시물레이션 모델을 개발하여 주요 설계 인자인 모터 토크의 피크치, 펌프의 관성 모멘트 등이 제어 성능에 미치는 영향을 분석하였다. 여기에서 실험 조건은 의도적으로 과도기에서 모터 토크가 포화되도록 선정하였다. 그 결과로서 최대 속도로 동작하는 EHA의 제어 정밀도를 개선하기 위한 설계 조건을 조사하였다.

• Journal of Electrical Engineering and Technology
• /
• 제7권2호
• /
• pp.184-192
• /
• 2012

The torque and unbalanced magnetic forces in permanent magnet machines are resultants of the tangential, axial and normal magnetic forces, respectively. Those are in general influenced by pole-teeth-winding configuration. A study of the torque and unbalanced magnetic forces of a small flux concentrating permanent magnet transverse flux machine (FCPM-TFM) in segmented compact structure is presented in this paper. By using FLUX3D software from Cedrat, Maxwell stress tensor has been solved. Finite element (FE-) magneto static study followed by transient analysis has been conducted to investigate the influence of unsymmetrical winding pattern, in respect to the rotor, on the performance of the FCPM-TFM. Calculating the magnetic field components in the air gap has required an introduction of a 2D grid in the middle of the air gap, whereby good estimations of the forces are obtained. In this machine, the axial magnetic forces reveal relatively higher amplitudes compared to the normal forces. Practical results of a prototype motor are demonstrated through the analysis.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.990-1001
• /
• 2015

This paper presents analysis of Switched Reluctance Machine (SRM) using Geometry Based Analytical Model (GBAM), Finite Element Analysis (FEA) and Fourier Series Model (FSM) with curve fitting technique. Further a Transient Analysis (TA) technique is proposed to corroborate the analysis. The main aim of this paper is to give in depth procedure in developing a Geometry Based Analytical Model of Switched Reluctance Machine which is very accurate and simple. The GBAM is developed for the specifications obtained from the manufacturer and magnetizing characteristic of the material used for the construction. Precise values of the parameters like Magneto Motive Force (MMF), flux linkage, inductance and torque are obtained for various rotor positions taking into account the Fringing Effect (FE). The FEA model is developed using MagNet7.1.1 for the same machine geometry used in GBAM and the results are compared with GBAM. Further another analytical model called Fourier Series Model is developed to justify the accuracy of the results obtained by the methods GBAM and FEA model. A prototype of microcontroller based SRM drive system is constructed for validating the analysis and the results are reported.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1178-1179
• /
• 2008

This paper describes a modeling of fixed speed wind power generation system which comprise of wind turbine, generator and grid. The wind turbine is based on MOD-2, which is IEEE standard wind turbine, and includes a component using wind turbine characteristic equation. Fixed speed induction generator is directly connected to grid, so the variation of wind speed has effects on the electrical torque and electrical output power. Therefore the power control mode pitch control system is necessary for aerodynamic control of the blades. But the power control mode does not operate at the fault condition. So it is required some methods to control the rotor speed at transient state for stabilization of wind power system. In this paper, simulation model of a fixed speed wind power generation system based on the PSCAD/EMTDC is presented and implemented under the real weather conditions. Also, a new pitch control system is proposed to stabilize the wind power system at the fault condition. The validity of the stabilization method is demonstrated with the results produced through sets of simulation.

• 한국산학기술학회논문지
• /
• 제7권6호
• /
• pp.1092-1099
• /
• 2006

본 논문에서는 유도전동기를 인버터와 같은 전력변환장치를 사용하여 정상상태의 동작특성은 물론 과도특성까지 해석하기 위해서는 유도전동기와 부하를 포함하는 전체 시스템의 정확한 동적 모델링을 이용하여 시스템 방정식으로 표현해야 한다. 또한 최대 견인력 제어를 위해서 속도센서리스벡터제어와 부하 토크 외란 관측기를 통하여 점착력 계수를 추정한다. 이와 같은 시스템의 제어 알고리즘을 구현하기 위하여 철도 모의 장치를 이용하여 제안된 알고리즘을 시뮬레이션과 실험을 통하여 확인하고, 철도 차량의 속도 가감에 따른 공전속도에 대한 점착력의 관계 등 제반 사항을 모의 장치에 의해서 구현하였다.

• 전력전자학회논문지
• /
• 제4권6호
• /
• pp.491-499
• /
• 1999

본 논문은 새로운 제어기법의 고성능 전동차 추진용 IGBT VVVF 인버터에 관한 것이다. 현차 적용 전에 견인력 제어성의 우수함과 안정성을 검증하기 위해, 현차 조건에서 발생될 수 있는 경우에 대한 모의 주행시험을 실시하고 그 결과를 보인다. 모의 주행시험은 160톤의 차량을 등가화한 관성부하장치를 이용하여 정상상태는 물론 전압변동 등 각종 과도상태에 대해서도 실시하였다. 본 논문에서는 4병렬 접속된 견인전동기의 토오크 제어성 향상을 위한 벡터제어기법 적용과 공간벡터 변조기법에 동기방식을 적용하여 500Hz이하의 저주파 스위칭으로써 6스텝까지 연속 과변조 제어가 가능한 최적의 PWM방법을 제시한다.