• 제목/요약/키워드: Transient Interior Noise

검색결과 6건 처리시간 0.021초

주행중 차실 내부 소음의 평가 (Objective Evaluation of Vehicle Interior Noise in Transient Operation)

  • 정혁;이정권
    • 소음진동
    • /
    • 제6권4호
    • /
    • pp.499-502
    • /
    • 1996
  • Interior noise, engine speed and vehicle speed are measured under transient road-load condition and interior noise signal is transformed by using the transient signal analysis methods, such as the spectrogram and wavelet transform. Using the analyzed results, subjective noise metrics such as the loudness, sharpness and articulation index at each vehicle speed can be estimated and characteristics of interior noise for various running modes can be discussed in the viewpoint of noise quality.

  • PDF

주행중 차실 내부 소음의 평가 (Objective Evaluation of Vehicle Interior Noise in Operation)

  • 정혁;이정권
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
    • /
    • pp.47-52
    • /
    • 1996
  • Interior noise, engine speed and vehicle speed are measured under road-load condition and interior noise signal is transformed by using the transient signal analysis methods such as the spectrogram and wavelet transform. Using the analyzed results, subjective noise criteria such as the loudness, noisiness and articulation index at each vehicle speed can be estimated and characteristics of interior noise for various running mode can be discussed in the viewpoint of noise quality.

  • PDF

음질평가를 통한 고속철도의 과도실내소음 특성 분석 (Sound Quality Evaluation for Transient Interior Noise of High-Speed Train)

  • 박준홍;박범;이신엽;최성훈
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2010년도 추계학술대회 논문집
    • /
    • pp.309-309
    • /
    • 2010
  • 한국은 산과 강이 많고 평야가 적은 지형적 특성상 터널 구간, 교량 구간 등이 많고 철도 차량이 이러한 구간들을 통과할 때 차량 내부에서 발생되는 과도 소음 또한 자주 발생하게 된다. 정상상태에서 소음에 비하여 과도상태에서 소음은 특성이 급격히 변화하여 승객들에게 더욱 큰 성가심을 유발할 수 있다. 특히 국내에서 운행중인 KTX 와 KTX 산천과 같은 고속철도의 경우 빠른 운행 속도로 인하여 과도 소음의 정도 또한 높아지게 된다. 따라서 더욱 정숙한 승객들의 승차 환경을 조성하기 위하여 과도상태에서의 실내소음 특성분석은 그 중요성이 더욱 커지고 있다. 본 연구에서는 고속철도가 감속 가속할 때, 터널을 통과할 때, 교량 위를 운행할 때, 차량이 교행할 때 등의 과도 상태에서의 실내 소음 특성을 음질평가의 방법으로 분석하고 정상상태에서의 소음 특성과 비교하였다.

  • PDF

실내소음 저감을 위한 능동패널의 체속도 제어 (Volume Velocity Control of Active Panel to Reduce Interior Noise)

  • 김인수
    • 소음진동
    • /
    • 제9권1호
    • /
    • pp.33-41
    • /
    • 1999
  • This paper presents a method of actively controlling the interior noise by a trim panel with hybrid feedforward-feedback control loop. The control technique is designed to minimize the vibration of panel whose motion is limited to that of a piston (out-of-plane motion). The hybrid controller consists of an adaptive feedforward controller in conjunction with a linear quadratic Gaussian (LQG) feedback controller. In order to maintain control performance of both persistent and transient disturbances, the feedback loop speeds up the adaptation rate of feedforward controller by improving damping capacity of secondary plant related with the adaptation rule. Numerical simulation and experimental result indicate that the hybrid controller is a more effective method for reducing the vibration of the panel (and therefore the interior noise) compared to using feedforward controller.

  • PDF

POSSIBILITIES TO IMPROVE TRANSIENT GEAR SHIFT NOISE (SHIFT CLONK) IN A PASSENGER CAR

  • BIERMANN J. W.;REITZ A.
    • International Journal of Automotive Technology
    • /
    • 제6권1호
    • /
    • pp.23-28
    • /
    • 2005
  • The presented investigation of shift clonk in a vehicle with front-wheel drive shows how a detailed analysis of the complete acoustic system with respect to excitation, transfer and radiation foremost enables possibilities of noise reduction to be worked out. One of the most important basics for the shift clonk analysis was a synchronous measurement of both, torsional vibrations in the drive train on the excitation side as well as airborne and structure-borne noise signals on the transfer and radiation side. Thus, root causes could be identified and improvement measures of the internal shift system could be worked out. An analysis of the transfer paths by means of airborne and structure borne noise measurements made evident that the side shafts were responsible for the disturbing frequencies in the transfer paths. With the help of the FE-simulation it was possible to develop measures of structure optimisation for the side shaft system. The realisation of these measures clearly reduced the shift-noises in the vehicle interior.

MULTIPLE SCALE ANALYSIS OF A DELAYED PREDATOR PREY MODEL WITHIN RANDOM ENVIRONMENT

  • Saha, Tapan;Bandyopadhyay, Malay
    • Journal of applied mathematics & informatics
    • /
    • 제26권5_6호
    • /
    • pp.1191-1205
    • /
    • 2008
  • We consider a delayed predator prey model. The local stability and Hopf bifurcation results are stated taking the time delay as a control parameter. We apply multiple scale analysis to analyze the effects of additive white noises near the Hopf bifurcation point at the positive interior equilibrium state. The governing equations for the amplitude of oscillations on a slow time scale are derived. We identify the process of amplitude of oscillations and derive its transient properties. We show that oscillations, which would decay in the deterministic system whenever time delay lies below its critical value, persists for long time under the validity of multiple scale analysis.

  • PDF