• 한국정밀공학회지
• /
• 제26권11호
• /
• pp.138-145
• /
• 2009

A suspended membrane micro fluidic heat flux sensor that is able to measure the heat flow rate was designed and fabricated by a complementary-metal-oxide-semiconductor-compatible process. The combination of a thirty-junction gold and nickel thermoelectric sensor with an ultralow noise preamplifier, low pass filter, and lock-in amp has enabled the resolution of 50 nW power and provides the sensitivity of $11.4\;mV/{\mu}W$. The heater modulation method was used to eliminate low frequency noises from sensor output. It is measured with various heat flux fluid of DI-water to test as micro fluidic application. In order to estimate the heat generation of samples from the output measurement of a micro fluidic heat-flux sensor, a methodology for modeling and simulating electro-thermal behavior in the micro fluidic heat-flux sensor with integrated electronic circuit is presented and validated. The electro-thermal model was constructed by using system dynamics, particularly the bond graph. The electro-thermal system model in which the thermal and the electrical domain are coupled expresses the heat generation of samples converts thermal input to electrical output. The proposed electro-thermal system model shows good agreement with measured output voltage response in transient state and steady-state.

• 한국수소및신에너지학회논문집
• /
• 제12권2호
• /
• pp.147-155
• /
• 2001

To measure of thermal loading in the combustion chamber of hydrogen engine with dual injection, instantaneous wall-surface temperature and unsteady heat flux of the cylinder head are measured and analyzed. The maximum wall surface temperature is shown in direct injection region which has large heat supplied. Partial and spatial temperatures have slight deviation in transient region of injection, though injection method change suddenly. All of thermal characteristics such as instantaneous temperature, temperature swing and heat flux of hydrogen engine with dual injection are remarkably higher than those of gasoline engine. It means necessity of additional countermeasure of thermal loading.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 춘계학술발표회논문집(2)
• /
• pp.643-650
• /
• 1995

A numerical method for treating transient diffusion Involving change of phase is presented. In other methods of dealing with this class of problems, the mass flux balance at the moving phase boundary requires explicit treatment of two distinct phases. The technique, originating from the apparent heat capacity method in transient heat conduction with the phase change, avoids the difficulty by transferring the concentration discontinuity at the boundary to smoothed physical property variations near the moving front. This technique accomodates the nonlinearities which preclude use of analytical solutions. It was tested against known analytical solutions for simple cases and turned out to be quite accurate.

• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1618-1629
• /
• 2003

The effects of the interaction between flow field and heat transfer caused by the longitudinal vortices are experimentally investigated using a five hole probe and a transient liquid crystal technique. The test facility consists of a wind tunnel with vortex generators protruding from a bottom surface and a mesh heater. In order to control the strength of the longitudinal vortices, the angle of attack of vortex generators used in the present experiment is 20$^{\circ}$, and the spacing between the vortex generators is 25mm. The height and cord length of the vortex generator is 20mm and 50mm, respectively. Three-component mean velocity measurements are made using a f-hole probe system, and the surface temperature distribution is measured by the hue capturing method using a transient liquid crystal technique. The transient liquid crystal technique in measuring heat transfer has become one of the most effective ways in determining the full surface distributions of heat transfer coefficients. The key point of this technique is to convert the inlet flow temperature into an exponential temperature profile using the mesh heater set up in the wind tunnel. The conclusions obtained in the present experiment are as follows: The two maximum heat transfer values exist over the whole domain, and as the longitudinal vortices move to the farther downstream region, these peak values show the decreasing trends. These trends are also observed in the experimental results of other researchers to have used the uniform heat flux method.

• 에너지공학
• /
• 제5권1호
• /
• pp.19-27
• /
• 1996

극저온 물질의 저장용기가 외부로부터 일정한 열유속을 받을 때 저장용기내의 압력상승을 해석하였다. 저장용기는 원통형 축대칭이고 윗벽과 아래벽은 단열되었으며 열유속은 옆벽에서 받는다. 유한차분법을 이용하여 저장용기내의 자연대류현상을 해석하였으며, 대상물질로는 산소, 수소 및 질소를 대상으로 하였다. 액체는 비압축성 유체, 기체는 virial 상태방정식을 만족하는 것으로 가정하였다. 기체의 2차 virial 계수는 Lennard-Jones 모형으로부터 구했다. 저장용기내의 압력상승에 미치는 주요한 인자는 외부열유속과 저장용기벽의 열용량 그리고 기체의 초기 부피비였으며, 이들중 가장 중요한 변수는 외부열유속이었다. 산소에 대해 기체를 이상기체를 가정했을 때와 virial 상태방정식을 만족하는 기체로 가정했을 때의 압력차이를 비교했다.

• ETRI Journal
• /
• 제20권4호
• /
• pp.380-394
• /
• 1998

A numerical study has been performed to predict the characteristics on the transient operation of the heat pipe with multiple heaters for electronic cooling. The model of the heat pipe was composed of the evaporator section with four heaters, insulated transport section, and the condensor section with a conductor which is cooled with uniform heat flux condition to surrounding. The governing equations and the boundary conditions were solved by the generalized PHOENICS computational code employing the finite volume method. Two test cases are investigated in present study; Case 1 indicates that the 1st and 2nd heaters among four heating sources are heated off, while the 3rd and 4th heaters are heated on. Case 2 is the inverse situation switched from heating location of Case 1. The results show that the transient time to reach the steady state is shorter for Case 1 than for Case 2. Especially, the temperature difference of the heater during switching operation is relatively small compared to the maximum allowable operating temperature difference in electronic system. Hence, it is predicted that the heat pipe in present study operates with thermally good reliability even for switching the heaters.

• 한국전산유체공학회지
• /
• 제5권1호
• /
• pp.27-32
• /
• 2000

This study investigates the problem of phase change from liquid to solid in the inviscid stagnation flow. The instantaneous location of the solid-liquid interface is fixed for all times by a coordinate transformation. Finite difference method is used to obtain the solution of the unsteady problem, and the growth rate of solid and the transient heat transfer from the surfaces of solid are investigated. The transient solution is dependent on the three dimensionless parameters, but the final steady state is determined by only one parameter of temperature ratio/conductivity ratio. It is observed that the instantaneous heat flux at the surface of solid can be obtained with sufficient accuracy by measuring the thickness of the solid or vice versa.

• 대한기계학회논문집B
• /
• 제31권9호
• /
• pp.764-771
• /
• 2007

The objective of the present work is to evaluate the evaporation heat flux of deposited droplet on the hot surface by using of inverse heat transfer technique. On the basis of measured temperature, a integral form solution is determined for the transient temperatures beyond the two positions by using Green's function technique. This method first approximates the temperature data with a half polynomial series of time. we compared this result with constant radius model in single phase regime, nucleate boiling regime, film boiling regime respectively. this paper performed the experiments as following conditions: (a)the surface temperature is within the range between $80^{\circ}C\;and\;160^{\circ}C$ in the conduction, (b) droplet diameter are 2.4 and 3.0mm. (c) surface roughness is $0.18{\mu}m$.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.867-868
• /
• 2011

LOx/케로신 로켓엔진 연소시 연소실로 전달되는 열전달과 그에 따른 벽온도 변화를 비정상 해석하였다. 막냉각이 없는 경우와 연료 막냉각이 있는 경우를 계산하였으며, 연소실 내측의 대류, 복사는 로켓엔진에 대한 경험식을 이용하였고, 벽 내부의 전도는 2차원 축대칭의 형태로 수치해석 하였다. 본 해석을 통하여 막냉각 냉각효과에 의한 벽면 온도의 시간에 따른 변화, 최대온도 지점의 변화등을 분석하였다.

• 한국안전학회지
• /
• 제22권4호
• /
• pp.13-19
• /
• 2007

An numerical method to estimate thermal diffusivity has been developed for one-dimensional unsteady heat conduction problem, when the temperatures are know at two positions in a semi-infinite body. Using the closed form solution which has already derived an explicit solution for the inverse problem for one-dimensional transient heat conduction using Laplace transform technique, we first estimate the surface temperature. The thermal diffusivity can be estimated by using the estimated surface temperature and measured temperatures, which include some uncertainties. The estimated surface heat flux and thermal diffusivity are found to be in good agreement with those of the experimented conditions. This method will be extended to the simultaneous measurement of thermal diffusivity and thermal conductivity.