• Wind and Structures
• /
• 제8권2호
• /
• pp.79-88
• /
• 2005

This paper deals with a unified way for calculating vortex-induced vibrations (Aeolian vibrations in transmission line parlance) of undamped single overhead conductors. The main objective of the paper is to identify reduced parameters which would unify the predicted vibration response to the largest possible extent. This is actually done by means of a simple mathematical transformation resulting, for a given terrain (associated to a given wind turbulence intensity), into a single, unified response curve that is applicable to any single multi-layered aluminium conductor. In order to further validate the above process, the predicted, unified response curve is compared with measured response curves drawn from tests run on a full-scale test line using several aluminium-conductor-steel-reinforced (ACSR), all-alloy-aluminium-conductor (AAAC) and aluminium-conductor-alloy-reinforced (ACAR) conductors strung at different tensions. On account of the expected scatter in the results from such field tests, the agreement is shown to be good. The final results are expressed by means of only four different curves pertaining to four different terrain characteristics. These curves may then be used to assess the vibration response of any undamped single, multi-layer aluminium conductor of any diameter, strung at any practical tension.

• Journal of the Korean Data and Information Science Society
• /
• 제7권2호
• /
• pp.235-245
• /
• 1996

확률변수 (X,Y)가 이변량 정규분포를 따르는 경우, 모상관계수 ${\rho}$에 관한 여러 가설들 중에서 $H_{0}:{\rho}={\rho}_{0}$인 경우에는 알려진 분포를 이용한 통계적 추론을 하기가 어렵다. 이러한 경우 Fisher에 의해 제안된 Z-변환을 이용한 근사적 검정법이 사용되어 오고 있으나 근사적인 방법이기 때문에 주어진 표본의 크기가 충분히 많지 않은 경우에는 적용에 무리가 있을 수 있다. 그래서 본 논문에서는 먼저 표본 상관계수 R의 분포를 모의실험을 통하여 직접 구하여 검정한 정확 검정법과, 붙스트랩(bootstrap) 방법을 이용하여 구한 붙스트랩 검정법을 제시하고, Fisher의 방법의 효율성과 실제성을 검토하고 제시된 방법들과 서로 비교하고자 한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.143-146
• /
• 1999

A method to control the speed of DC motor with one-chip microprocessor PIC using PWM is discussed in this paper. This thesis deals with the DC motor speed control for electric bicycles which may be used as an alternative means of transformation in the future. We tried to design a stable system for controlling the speed of DC motor and materialized an electric bicycle loading this system. Now we are on the way to find out the problems this system has and work out the solutions.

• Korean Chemical Engineering Research
• /
• 제49권2호
• /
• pp.263-270
• /
• 2011

본 논문의 목적은 리튬-암모니아 솔루션$(Li(NH_3)_n)$의 실험을 통하여 암모니아물질의 임계점인 $-40^{\circ}C$ 근처에서의 열전특성을 분석하고 이를 증명하는 것이다. 실험 결과 0.58 MPM~1.87 MPM을 갖는 리튬-암모니아 솔루션 $(Li(NH_3)_n)$ 은 온도차$({\Delta}T=0{\sim}15^{\circ}C)$에서 전류가 전압에 비례하는 열전전력을 발생시킨다는 사실을 확인하였다. 본 논문은 열전 물질 개발에 새로운 방향을 제시할 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.305-306
• /
• 2008

본 논문에서는 PRAM 에서 기록매질로 이용될 수 있는 최적의 물질을 찾고자 $Ge_2Sb_2Te_5$ 박막에 Al을 첨가하여 비정질-결정질 천이시의 원자구조와 상변화 특성간의 관계를 연구하였다. 이 실험에 사용된 $Al_x(Ge_2Sb_2Te_5)_{1-x}$ 조성은 5N의 금속 파우더를 용융-냉각법으로 벌크를 제작하였고 열증착 방법으로 Si (100) 및 유리 (corning glass, 7059) 기판위에 200nm 두께로 박막을 증착하였다. 비정질 박막의 상변화에 따른 반사도 차이를 평가하기 위해서 658 nm의 LD가 장착된 나노펄스 스캐너를 이용하여 power; 1~17mW, pulse duration; 10~460 ns의 범위에서 각 조성의 비정질-결정질 상변화속도를 측정, 비교 분석하였다. 또한 각각의 박막을 $100^{\circ}C$ 에서 $400^{\circ}C$ 까지 $50^{\circ}C$ 간격으로 $N_2$ 분위기에서 1시간동안 열처리 한 후 XRD와 UV-Vis-NIR spectrophotometer를 사용하여 각 상의 구조분석 및 광학적 특성을 분석하였다. 또한 4-point probe로 면저항을 측정하였다.

• International Journal of Contents
• /
• 제7권3호
• /
• pp.71-81
• /
• 2011

This paper is mainly associated with setting out an agenda for the transformation of security by creating a new framework for a security system, which can maximise its effectiveness. Noticeably, this research shows empirically that crimes are getting a major cost to organisations, which if reduced by security and investigations could reap substantial rewards to the finances of an organisation. However, the problem is that the delivery of security is frequently delegated to personnel (e.g. security guards) with limited training, inadequate education, and no real commitment to professionalism - 'sub-prime' security, finally causing security failures. Therefore, if security can be enhanced to reduce the crime cost, this will produce financial benefits to business, and consequently could produce a competitive advantage. For this, the paper basically draws upon Luke's theoretical framework for deconstructing 'power' into three dimensions. Using this three-dimensional approach, the paper further sets out a model of how security can be enhanced, utilising a new Security Risk Management (SRM) model, and how can this SRM model create competitive advantage in business. Finally, this paper ends with the six strategies needed to enhance the quality of security: refiguring as SRM, Professional Staff, Accurate Measurement, Prevention, Cultural Change, and Metrics.

• 한국기계가공학회지
• /
• 제7권2호
• /
• pp.72-77
• /
• 2008

In this study, we propose and develop PDMS-based modular actuators. The microactuator which looks like a small insect uses thermal expansion power of the PDMS (polydimethylsiloxane; $sylgar^{(R)}$ 184 silicone elastomer). The PDMS-based microactuator provides a large displacement due to a high thermal expansion coefficient (approximately 310ppm). The microacruator with 1mm length $350{\mu}m$ width is optimized by using a numerical analysis. The shape of the PDMS actuatoris variously designed. They are placed at several positions to find the optimal position that provides a high transformation ratio. The PDMS-based microactuators are fabricated using a conventional micromaching technique. The fabricated microactuator is heated using a hot-plate. The actuator displacement is measured as a function of temperature from $27^{\circ}C$ to $300^{\circ}C$. The experimental results are compared to the simulation result. When heating temperature up to $300^{\circ}C$ is applied to the PDMS actuator, each V-groove-shaped joint is actuated $30{\mu}$ mat $300^{\circ}C$. Anotherdesign of the microactuator has a maximum displacement of about 656mm.

• 조명전기설비학회논문지
• /
• 제23권5호
• /
• pp.101-109
• /
• 2009

본 논문에서는 변압비가 다른 2개의 삼상 변압기를 이용한 새로운 방식의 cascade 3상 IHCML(Isolated H-bridge Cascade Multi-Level) 인버터 및 제어 방식을 제안한다. 또한 cascade 3상 IHCML 인버터를 제어하기 위해 최근접 벡터를 이용한 벡터제어 기법을 사용하였다. 이로 인해 많은 전력을 담당하는 대용량 H-bridge의 스위칭 주파수는 출력 기본주파수와 거의 동일하여 제어 스위치 손실이 작으며, 작은 전력을 담당하는 저용량 H-bridge의 스위칭 주파수는 높게 제어 하므로 출력전압의 품질이 향상되었다.

• 한국멀티미디어학회논문지
• /
• 제17권12호
• /
• pp.1446-1452
• /
• 2014

Existing LDA uses the transform matrix that maximizes distance between classes. So we have to convert from an image to one-dimensional vector as training vector. However, in 2D-LDA, we can directly use two-dimensional image itself as training matrix, so that the classification performance can be enhanced about 20% comparing LDA, since the training matrix preserves the spatial information of two-dimensional image. However 2D-LDA uses same calculation schema for transformation matrix and therefore both LDA and 2D-LDA has the heteroscedastic problem which means that the class classification cannot obtain beneficial information of spatial distances of class clusters since LDA uses only data correlation-based covariance matrix of the training data without any reference to distances between classes. In this paper, we propose a new method to apply training matrix of 2D-LDA by using WPS-LDA idea that calculates the reciprocal of distance between classes and apply this weight to between class scatter matrix. The experimental result shows that the discriminating power of proposed 2D-LDA with weighted between class scatter has been improved up to 2% than original 2D-LDA. This method has good performance, especially when the distance between two classes is very close and the dimension of projection axis is low.

• 방송공학회논문지
• /
• 제13권3호
• /
• pp.415-418
• /
• 2008

소형의 휴대용 단말기는 회로복잡도나 소비전력 등의 문제로 부동소수점 연산 프로세서를 탑재하지 않는 경우가 있는데, 이로 인해 오디오 데이터의 디코딩 시간이 길어져, 끊김이나 잡음이 발생한다. 본 논문에서는 이를 해결하기 위해서 MPEG-4 오디오 디코딩 시 수행되는 실수형 연산과정을 정수형 연산과정으로의 변환을 통하여 디코딩 속도를 향상 시킬 수 있는 알고리즘을 제안하고 실험결과를 통해서 효율성을 보인다.