• Journal of the Korean Society of Costume
• /
• v.51 no.3
• /
• pp.111-127
• /
• 2001

This study aims to apply the formative aesthetic of human body to the form of clothing. For this purpose I try to find the various methods of analysis used in the work of sculpture. The method of inference and the checklists of design are used to relate the sculpture with the clothing design specifically. This methodology intends to regard human body as an artistic form and use the image of sculpture to the maximum. Especially I try to derive the motives of design and recreate them in clothing design emphasizing silhouette. On this methodology, following results were developed. First, the observations on the formative characteristic of human body show that the transformed form of human body expresses more perfect image of human body than the original form. The power of simplicity heightens the total beauty of the work. Second, the image of human body expressed in simplicity heightens the total beauty of the work. Second, the image of human body expressed in simplicity and exaggeration can be variously recreated in a silhouette with the formative and cubic effect, simplicity, and activity. Third, the elegant and static image found in the analysis and synthesis of human body can be used as a motive of clothing design and the changed details lead to the transformation of silhouette. Fourth, in developing designs by the item of checklists, one motive can be variously recreated according to the methods of designs.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.1 s.94
• /
• pp.105-111
• /
• 2005

This paper is concerned with the active vibration control of smart structure using actuator signal made of pulse width modulation. The pulse width modulation has been used in motor control, where the amount of energy fed into the motor is controlled by the pulse width instead of applied voltage. The advantage of using the pulse width modulation is that analog signal can be replaced by the digital signal so that we can reduce system costs and power consumption. The effect of pulse width modulation on the vibration response was investigated in this study and the valid transformation rule was found. Then, the pulse width modulation was realized using a microprocessor and electronic circuit. The active vibration suppression was carried out by combining the positive position feedback controller and the pulse width modulation. The experimental result shows that we can replace an expensive amplifier with a pulse width modulation system thus reducing the system cost. The result also shows that the active vibration control can be achieved by the pulse width modulation technique.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.10
• /
• pp.1344-1352
• /
• 2018

In this paper, we propose a two-port S-parameter data to diagnose the fault conditions of a single-phase transformer. Using the S-parameters we can measure the reflection and transmission characteristics of signal power at the port of a transformer, which can also be converted into ABCD parameters and Z parameters through a well-known conversion formulas. Transformer fault diagnoses can be performed based on the intuitive and qualitative/quantitative characteristics of the these parameters. In addition, we can obtain wide frequency characteristics at the primary and secondary sides of the transformer, which can be used to get time domain responses using the inverse Fourier transformation with some specific input waveform. In order to verify the effectiveness of the proposed method, the fault conditions were analyzed in simulation and experiment for 3 kVA single phase transformer with 15: 5 turns ratio, and the validity of the proposed method was verified.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.888-894
• /
• 2015

This paper describes an efficient hardware design of Lightweight Encryption Algorithm (LEA) developed by National Security Research Institute(NSRI). The LEA crypto-processor supports for master key of 128-bit. To achieve small-area and low-power implementation, an efficient hardware sharing is employed, which shares hardware resources for encryption and decryption in round transformation block and key scheduler. The designed LEA crypto-processor was verified by FPGA implementation. The LEA core synthesized with Xilinx ISE has 1,498 slice elements, and the estimated throughput is 216.24 Mbps with 135.15 MHz.

• The Korean Journal of Applied Statistics
• /
• v.15 no.2
• /
• pp.223-232
• /
• 2002

The present paper develops a test of the multivariate normality based on nonlinear transformations and the likelihood function. For checking the normality, we test the shape parameter which indexes the family of transformations. A score test and a parametric bootstrap test are used to evaluate the discrepancy between the data and a multivariate normal distribution. In order to compare the performance of our test with the existing tests, a simulation study was carried out for several situations where nuisance parameters have to be estimated. The results showed that the proposed method is superior to the existing methods.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.9
• /
• pp.1566-1574
• /
• 2010

This paper presents an in-depth review for current status for demand-side management (DSM) investment of energy supplier and an useful prospect on the introduction of Energy Efficiency Resource Standards (EERS). According to the Article 9 of Rational Energy Utilization Act, Energy suppliers-Korea Electric Power Corporation (KEPCO), Korea Gas Corporation (KOGAS) and Korea District Heat Corporation (KDHC) prescribed by Presidential Decree-must establish and implement annual demand-side management investment plan to improve energy efficiency in production, transformation, transportation, storage and usage of corresponding energy and to reduce demand and green house gas emissions. In this paper, we examine the DSM programs of energy suppliers and the results of DSM investment in 2009, then we propose a reasonable solution for the development of DSM investment. Furthermore, in order to compare our situation, the case studies were conducted on EERS issues in England, Italy, France and U.S, such as establishing the energy saving target, selecting the target energy supplier, and penalty and incentive mechanisms. Throughout the case studies, this paper suggests the directions to the DSM investment planning of energy suppliers and the major issues to prepare EERS in Korea.

• Journal of Internet Computing and Services
• /
• v.3 no.4
• /
• pp.27-36
• /
• 2002

The purpose of this study is to develop editor applied to vector image for the distance learning system(FVU), which enables teachers effectively to construct self-page on the screen, to reduce the size of file for teaching, and to correct many different kinds of event which was already made in the previous, The design of the editor is used UML and the editor is named VUEditor. The first page which is needed in class can be constructed by using VUEditor. The contents using VUEditor ore exported into VUAuthor through Vector-transformation. Through this procedure, the size of image file comes to be reduced, it has a low bond width. In conclusion, this VUEditor enables user to construct the first page. even without using such applied program as Image Tool and Power Point, to solve the problem of network traffic for reducing size of the file.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.129-132
• /
• 2004

A guard lamp system has been installed at the PV positive center, located at Gwangju in Korea. Digital environment that is represented to internet is displacing business way of industry and business achievement way with the fast speed being giving great change on life whole, improve existence business process utilizing internet and Web connection technology, information superhighway to tradition industrialist manufacture and e-transformation's propulsion that wish to maximize productivity and administration efficiency is spread vigorously. In this paper, we wish to accomplish generation equipment's heighten stability and believability through remote monitoring and control of guard lamp system. This paper describes the design of the monitoring system for the sensing data and indirect controlling of the guard lamp system. Most of the conventional monitoring systems depend on the special hardware and software. The essential design of monitoring system is to provide the convenience for the user and the portability for the system. In order for the system to fulfill its requirements, it was designed using Labview GUI facility based on the Windows 2000 environment of IBM PC compatible and Add-oncard based on the TCP/IP protocol. Advantage of the monitoring system are a personnel expenses curtailment effect, of the place restriction and unmanned system of the generationplants, etc..

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.323-326
• /
• 2001

NI$_2$MnGa-based ferromagnetic shape memory alloys (FSMA) are hoped to be used as robust actuators with high performance and power density, as a replacement of other actuation materials such as thermo-mechanical SMAs and mechanical-electric piezoelectrics. Recently, we have observed significant shape changes under magnetic field application when single- and poly-crystalline forms are used. In the present study, two mechanisms have been proposed to predict the magnetic field-induced shape change as a function of external magnetic field at temperatures below Mr and above Ar. In the case of the field-induced shape change at temperature below M$_{f}$, paired martensite variants are assumed to form by application of magnetic field. The direction of magnetization in martensites formed in austenite matrix is assumed to be parallel to the applied magnetic field in the case of shape change by application at temperature above Af. Various energies has been considered in the shape change under two mechanisms.s.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.643-648
• /
• 2005

Generally, ships have marks of various shapes on outside of the hull. Among them, so called "Draft Mark" indicates the distance from the bottom of the keel to the waterline. Draft marks are used to determine the displacement and other properties of the ship for stability and control purposes. These marks are made up of welding bead or sticking the steel plate on outside of the hull. To improve the confidence level of the ship owner, quality and accuracy of the draft mark is very important. So the automatic mark welding robot is used to enable a high quality and accurate manufacturing line. To improve the system portability, the system is divided into two distinct parts, namely mechanical part and control part. Mechanical part is robust, a lightweight, and easy to dismantle. The control part consists of an in-house developed controller, which is based on embedded Linux. Also, the control part consists of power line communication module to ensure the applicability of the controller in manufacturing line. In this paper, the methodologies of control and configuration of the robot are discussed.