• 약학회지
• /
• 제26권4호
• /
• pp.231-237
• /
• 1982

The transformation kinetics between polymorphs of sulpiride and the effect of additives on the transformation kinetics were studied. The results could be summarized as follows. 1. Transformation kinetics of the polymorph form I to form II in water suspenion was first order type and transformation rate constant at $25^{\circ}C$ is $2.61{\times}10^{-2}min^{-1}$, the half life of form I was about 27 minutes and the activation energy for transformation was 21.35 Kcal/mole. 2. Glycerine and coloring agents increased the rate of transformation., In the case of polysorbate 80, the rate constant increased in proportion to the concentration of polyserbate 80. Simple syrup showed no effect 3n transformation kinetics.

• 대한수학회논문집
• /
• 제37권1호
• /
• pp.213-228
• /
• 2022

In the present paper, we aim to study Yamabe soliton and Riemann soliton on Lorentzian para-Sasakian manifold. First, we proved, if the scalar curvature of an 𝜂-Einstein Lorentzian para-Sasakian manifold M is constant, then either 𝜏 = n(n-1) or, 𝜏 = n-1. Also we constructed an example to justify this. Next, it is proved that, if a three dimensional Lorentzian para-Sasakian manifold admits a Yamabe soliton for V is an infinitesimal contact transformation and tr 𝜑 is constant, then the soliton is expanding. Also we proved that, suppose a 3-dimensional Lorentzian para-Sasakian manifold admits a Yamabe soliton, if tr 𝜑 is constant and scalar curvature 𝜏 is harmonic (i.e., ∆𝜏 = 0), then the soliton constant λ is always greater than zero with either 𝜏 = 2, or 𝜏 = 6, or λ = 6. Finally, we proved that, if an 𝜂-Einstein Lorentzian para-Sasakian manifold M represents a Riemann soliton for the potential vector field V has constant divergence then either, M is of constant curvature 1 or, V is a strict infinitesimal contact transformation.

• International Journal of Control, Automation, and Systems
• /
• 제5권6호
• /
• pp.652-662
• /
• 2007

This paper presents a new and simple method for sensorless operation of matrix converter drives using a constant air-gap flux and the imaginary power flowing to the motor. To improve low-speed sensorless performance, the non-linearities of a matrix converter drive such as commutation delays, turn-on and turn-off times of switching devices, and on-state switching device voltage drop are modeled using PQR transformation and compensated using a reference current control scheme. The proposed compensation method is applied for high performance induction motor drives using a 3 kW matrix converter system. Experimental results are shown to illustrate the feasibility of the proposed strategy.

• 한국안전학회지
• /
• 제24권1호
• /
• pp.26-30
• /
• 2009

Shape memory recoverable stress and strain of Ti-42.5at%Ni-10at%Cu alloys were measured by means of constant temperature tensile tests. The alloys' transformation behavior is B2 - B19 by DSC result. The strain by tensile stress were perfectly recovered by heating at any testing conditions but shape memory recoverable stress increased to 66MPa and then slightly decreased. Transformation temperatures from thermal cycling under constant uniaxial applied tensile loads linearly increased by increasing tensile load and their thermal hysteresis are about 110K and their maximum recoverable strain is 6.5% at 100MPa condition.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(2)
• /
• pp.842-845
• /
• 2005

A method for the numerical simulation of two-dimensional free-surface flow resulting from the propagation of regular gravity waves over topography with arbitrary bottom shape is presented. The method is based on the numerical solution of the Euler equations subject to the fully nonlinear free-surface boundary conditions and the appropriate bottom, inflow and outflow conditions using a hybrid finite-differences and spectral-method scheme. The formulation includes a boundary-fitted transformation, and is suitable for extension to incorporate large-eddy simulation (LES) and large-wave simulation (LWS) terms for turbulence and breaking wave modeling, respectively. Results are presented for the simulation of the free-surface flow over two different bottom topographies, with constant slope values of 1:10 and 1:20, two different inflow wave lengths and two different inflow wave heights. An absorption outflow zone is utilized and the results indicate minimum wave reflection from the outflow boundary. Over the bottom slope, lengths of waves in the linear regime are modified according to linear theory dispersion, while wave heights remain more or less unchanged. For waves in the nonlinear regime, wave lengths are becoming shorter, while the free surface elevation deviates from its initial sinusoidal shape.

• Korean Journal of Mathematics
• /
• 제29권2호
• /
• pp.445-453
• /
• 2021

The purpose of the paper is to study of Para-Kenmotsu metric as a 𝜂-Ricci soliton. The paper is organized as follows: • If an 𝜂-Einstein para-Kenmotsu metric represents an 𝜂-Ricci soliton with flow vector field V, then it is Einstein with constant scalar curvature r = -2n(2n + 1). • If a para-Kenmotsu metric g represents an 𝜂-Ricci soliton with the flow vector field V being an infinitesimal paracontact transformation, then V is strict and the manifold is an Einstein manifold with constant scalar curvature r = -2n(2n + 1). • If a para-Kenmotsu metric g represents an 𝜂-Ricci soliton with non-zero flow vector field V being collinear with 𝜉, then the manifold is an Einstein manifold with constant scalar curvature r = -2n(2n + 1). Finally, we cited few examples to illustrate the results obtained.

• 열처리공학회지
• /
• 제12권4호
• /
• pp.313-319
• /
• 1999

The reverse transformation behavior was investigated by DSC analysis in thermomechanically processed Fe-30%Ni-0.35%C alloy. Upon increasing the heating rate from $5^{\circ}C/min$ to $80^{\circ}C/min$, the As point of the ausformed martensite was not changed and the As point of the marformed martensite decreased at reverse transformation. The Af points showed to be constant with increasing the heating rate both in the ausformed martensite and in the marformed martensite. With increasing the deformation degree, the As points of the ausformed martensite and the marformed martensite increased and the Af points appeared to be constant, structures. The enthalpy changes increased with increasing the heating rate, but decreased with increasing the deformation degree in both structures.

• Applied Biological Chemistry
• /
• 제38권5호
• /
• pp.371-375
• /
• 1995

식물 병원성 사상균 F. oxysporum과 R. solani에 대하여 우수한 길항력을 갖는 Pseudomonas (P.) fluorescens를 작물 근권으로 부터 분리하여 생리, 생화학적 특성을 조사하였다. 이들 분리 근권길항 미생물중 한 균주인 Ps70과 plasmid pSV2-neo를 이용하여 electroporation에 의한 길항 미생물 P. fluorescens의 transformation 가능성과 최적 조건을 조사하였다. 그 결과 10% glycerol을 P. fluorescens buffer로 사용하여 2.5kV의 voltage, $200{\Omega}$의 resistance에서 최적의 electrotransformation 효과를 보였다. 또한, 이균주에 크기가 서로 다른 plasmid를 electroporation하여 transformation 효과를 비교한 결과 voltage, electroporation buffer의 조성, 그리고 resistance (time constant)가 transformation의 효과를 증진하는데 주요한 역할을 하는것으로 나타났으며, 또 다른 P. fluorescens 균주에 같은 실험을 반복한 결과 유사한 electrotransformation 효과를 보였다.

• Communications for Statistical Applications and Methods
• /
• 제31권3호
• /
• pp.349-363
• /
• 2024

Compositional data refers to data where the sum of the values of the components is a constant, hence the sample space is defined as a simplex making it impossible to apply statistical methods developed in the usual Euclidean vector space. A natural approach to overcome this restriction is to consider an appropriate transformation which moves the sample space onto the Euclidean space, and log-ratio typed transformations, such as the additive log-ratio (ALR), the centered log-ratio (CLR) and the isometric log-ratio (ILR) transformations, have been mostly conducted. However, in scenarios with sparsity, where certain components take on exact zero values, these log-ratio type transformations may not be effective. In this work, we mainly suggest an alternative transformation, that is the square-root transformation which moves the original sample space onto the directional space. We compare the square-root transformation with the log-ratio typed transformation by the simulation study and the real data example. In the real data example, we applied both types of transformations to the USG% data obtained from NBA, and used a density based clustering method, DBSCAN (density-based spatial clustering of applications with noise), to show the result.

• 한국토양비료학회지
• /
• 제28권3호
• /
• pp.233-240
• /
• 1995

Ficks의 확산 편미방을 Laplace 변환을 적용하여 초기 및 경계조건과 함께 종속 대수 함수로 변환하고 Burington의 역변환표를 활용하여 복귀하는 방법으로 Ficks의 확산 편미방의 해를 구하였다. 적용된 초기 및 정계조건은 일정깊이의 담수에로 무한 깊이의 일정 염농도의 균일한 간척지 토양에서 상향 염분확산 이동에 대한 것이었다. 유도된 해는 특이 조건에서의 비교법으로 오.등 및 Kirkham, 등이 보고 한 간단한 초기 빛 경계조건에서의 해와 일치함을 확인했다. Ficks의 확산식의 해로 계산된 완만한 제염 속도를 근거로하여 담수 제염 방법별 제염 속도와 토양중 염분분포를 추정할수있는 모형식을 제시하였다.