• Tribology and Lubricants
• /
• v.30 no.6
• /
• pp.323-329
• /
• 2014

The friction-reducing properties of lubricants containing ionic liquids based on ammonium dithiocarbamate are studied. The ionic liquids are produced through the following two steps: the synthesis of sodium alkyl dithiocarbamates via the substitution reaction of dialkylamine and carbon disulfide and their subsequent conversion into ammonium dithiocarbamate-based ionic liquids through an ion-exchange reaction with a quaternary alkyl ammonium halide salt. The structures of the ionic liquids are characterized by NMR spectroscopy and Fourier transform infrared spectroscopy. The isolated yields of the ionic liquids, which are viscous and pale yellow, are approximately 92%. The Brookfield viscosities and pour points of the ionic liquids are determined. Further, their wear resistances are measured through the four-ball wear test and the Schwingung Reibung Ver-schleiss (oscillation, friction, wear) test. The wear scar diameter of the lubricants containing 1 wt of the quaternary alkyl ammonium dithiocarbamate-based ionic liquids (0.475-0.631 mm) is significantly lower than that of the base oil (0.825 mm), proving that the ammonium dithiocarbamate-based ionic liquids have good friction-reducing characteristics. However, these friction-reducing characteristics fade significantly after long-term storage, owing to the degradation of the ionic liquids.

• Food Engineering Progress
• /
• v.13 no.1
• /
• pp.24-31
• /
• 2009

The structural and physicochemical properties of dried aloe vera gel by DIS (dewatering impregnation soaking) process under optimum conditions were investigated. FT-IR spectra for dried samples of DIS aloes showed the typical patterns of standard aloe polysaccharide, and surface structures by SEM (scanning electron microscopy) were similar to a gel-like structure. In case of physicochemical properties of dried aloe samples by DIS process, solubilities and swelling powers of control (not osmotic treated aloe), DIS (S) and DIS (G), samples treated by osmotic solution of 60% sucrose/0.25% NaCl and 50% glucose/0.5% NaCl, were 48.3-57.3% and 8.3-11.7%, respectively, showing no significant differences among samples, but swelling power of DIS (PEG), sample treated by using 50% polyethylene glycol as an osmotic agent was about 5 times higher that of control. Also, water holding capacities of control, DIS (S) and DIS (G) were similar to each other, but that of DIS (PEG) was about 5 times higher that of control. Oil holding capacities of control and DIS aloes maintained the 50.9-86.4% levels of water holding capacities showing no significant differences among samples. Rehydration ratio of DIS (PEG) aloes were significantly dependent on the temperature of rehydrated solvent (water), and rehydration ratio of not-fileted aloe was about two folds higher than that of fileted aloe.

• Journal of Ceramic Processing Research
• /
• v.20 no.6
• /
• pp.589-596
• /
• 2019

Pigments with minute particle sizes, such as carbon black (CB) and pigment red 48:2 (P.R.48:2), are the most important types of pigment and have been widely used in many industrial applications. However, minute particles have large surface areas, high oil absorption and low surface energy. They therefore tend to be repellent to the vehicle and lose stability, resulting in significant increases in viscosity or reaggregation in the vehicle. Therefore, finding the best way to improve the dispersion properties of minute particle size pigments presents a major technical challenge. In this study, minute particle types of CB and P.R.48:2 were treated with nitrogen gas plasma generated via radio frequency-plasma enhanced chemical vapor deposition (RF-PECVD) to increase the dispersion properties of minute particles in deionized (DI) water. The morphologies and particle sizes of untreated and plasma treated particles were evaluated using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The average distributions of particle size were measured using a laser particle sizer. Fourier transform infrared spectroscopy was carried out on the samples to identify changes in molecular interactions during plasma processing. The results of our analysis indicate that N2 plasma treatment is an effective method for improving the dispersibility of minute particles of pigment in DI water.

• Tribology and Lubricants
• /
• v.37 no.1
• /
• pp.7-13
• /
• 2021

Ball bearing is a device that supports and transmits a load acting on a rotating shaft, and it is a type of rolling bearings that uses the rolling friction of the balls by inserting balls between the inner ring and the outer ring. Grease, which is prepared by mixing a thickener with a base oil, is a lubricant commonly used in bearings and has the advantage of a simple structure and easy handling. Bearings are increasingly being used in high value-added products such as semiconductors, aviation, and robots in the era of the 4th industrial revolution. Accordingly, there is an increasing demand for bearing grease. The selection of grease is an important factor in the bearing design. Therefore, a study must be conducted on the grease life evaluation to select an appropriate grease according to operating conditions such as a high temperature, high rotational speed, and high load. In this study, we evaluate the life of ball-bearing grease according to various operating conditions, namely, temperature, speed, and load changes. For this, we develop and theoretically verify a grease life test machine for ball bearings. We conduct a life test of grease according to various operating conditions of bearings and predict the grease life with a 10% and 50% failure probability using the Weibull analysis. In addition, we analyze the oxide characteristics of the grease over time using the Fourier transform infrared spectroscopy and the deterioration characteristics of the grease using the carbonyl index.

• Advances in materials Research
• /
• v.13 no.3
• /
• pp.183-194
• /
• 2024

D3 tools steel and 440C stainless steel (SS) are normally being employed for application such as knife blade and cutting tools. These steels are iron alloys which have high carbon and high chromium content. In this study, lab work focused on the microstructural and corrosion behavior of D3 tools steel and 440C SS after went through heat treatment processes. Heat treatments for both steels were started with normalizing at 1020 ℃, continue with hardening at 1000 ℃followed by oil quenching. Cryogenic treatment was carried out in liquid nitrogen for 24 hours. The addition of cryogenic heat treatment is believed to increase the hardness and corrosion resistance for steels. Both samples were then tempered at two different tempering temperatures, 160 ℃ and 426 ℃. For corrosion test, the samples were immersed in NaCl solution for 30 days to study the corrosion behavior of D3 tool steel and 440C SS after heat treatment. The mechanical properties of these steels have been investigated using Rockwell hardness machine before heat treatment, after heat treatment (before corrosion) and after corrosion test. Microstructure observation of samples was carried out by scanning electron microscopy. The corrosion rate of these steels was calculated after the corrosion test completed. From the results, the highest hardness is observed for D3 tool steel which tempered at 160 ℃(54.1 HRC). In terms of microstructural analysis, primary carbide and pearlite in the as-received samples transform to tempered martensite and cementite after heat treatment process. From this research, for corrosion test, heat treated 440C SS sample tempered with 426 ℃possessed the excellent corrosion resistance with corrosion rate 0.2808 mm/year.

• Microbiology and Biotechnology Letters
• /
• v.36 no.4
• /
• pp.299-306
• /
• 2008

Human pancreatic lipase is a digestive enzyme which is synthesized in pancreas, secreted into small intestine, and there hydrolyze the fat in food. Pancreatic lipase protein composes of catalytic domain and colipase-binding domain. In this research, the gene segments corresponding to total protein, catalytic domain, and co lipase-binding domain were cloned by PCR method, inserted into an expression vector, and then used to transform Escherichia coli BL21 (DE3). The recombinant proteins produced were purified and injected intramuscularly three times into laying hens. The egg yolk antibodies (IgY) were obtained from the egg yolks and tested for their antibody titer. Among three IgY, the IgY against colipase-binding domain showed the highest antibody titer. All three IgY had inhibitory effects on the porcine pancreatic lipase. Among them, the IgY against colipase-binding domain showed the highest inhibition effects. The fat diet with corn oil and IgY was administrated to the experimental rats and their blood compositions were examined with time course. The triglyceride concentration of treated rats was decrease meaningfully when compared with those of control rats. This suggested that the IgY against colipase-binding domain antigen inhibited pancreatic lipase in vivo.

• Food Science of Animal Resources
• /
• v.21 no.4
• /
• pp.349-357
• /
• 2001

The effects of dietary conjugated linoleic aicd on pork quality was investigated using sixty four pigs. CLA was synthesized by alkaline isomerization method with corn oil. Pigs were devided into 4 treatment groups(16 pigs/group) arid subjected to one of four treatment diets(0, 0.1, 0.2, and 0.3% CLA diets) for 2 weeks before slaughter. Pork loin and belly were collected from the animals(105∼110kg body weight) slaughtering at the commercial slaughter house. Pork loin and belly meat were aerobic packaged and then stored during 2. 5. 8. 11 and 13 days at 4$\^{C}$ refrigerator. Samples were analysed for meat color, texture and sensory characteristics. There were no diference in meat color(L*, a*, b*), texture and sensory property among control and CLA treatment (s), and no changes as the storage period passed. This results mean that feeding CLA to pork doesn't change the meat color and texture of the pork what consumers consider when they buy some meat. Especially, feeding CLA to pork didn't transform sensory property of the pork. We considered these result as no problem in the pig fed with CLA.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.11a
• /
• pp.158-162
• /
• 1998

향에 의해 유발되는 감성에 대한 중추신경계 및 자율신경계의 반응의 변화를 측정하기 위해 안정시키는 향과 각성시키는 향을 사용하여 주관적 평가와 동시에 시행하였다. 안정시키는 향으로 1% Lavendar 향을 사용하였고, 각성시키는 향으로 0.8% Jasmin 향을 사용하였으며, 안정상태를 향자극 전후에 측정하여 대조군으로 사용하였다. 중추신경계의 지표로 뇌파측정을 하였고 뇌파의 전극은 international 10-20 system에서 4 채널을 사용하였으며, 자율신경계의 지표로는 심전도, heart rate, 피부저항, 피부온도를 기록하였다. 뇌파의 분석은 Fast Fourier Transform analysis의 power spectra로 하였고, 그 frequency bands는 theta(4-8Hz), alpha(8-l3Hz), beta(14-30Hz)로 하였다 또한 심전도를 이용하여 심전도 상의 연속적인 R-R peak간 시간간격을 시계열 데이터로 재구성한 Heart rate variability 분석도 하였다. HRV 분석을 보다 정확히 할 수 있도록 호흡이 심전도에 미치는 영향을 제거하기 위하여 호흡을 분당 20회로 일정하게 하였다 생체신호 측정과 동시에 실시한 주관적 검사에서 lavendar 향은 친숙하게, jasmin 향은 활기차고 상쾌하고 유쾌하게 평가되었다. 뇌파 분석에서 lavendar 향을 주었을 때 theta의 증가 양상을 보였으며, Jasmin 향을 주었을 때는 모든 채널에서 beta 파의 증가 양상을 보였다. 또한 HRV 분석 결과 부교삼신경의 활동성이 부각되는 HF/LF의 값이 lavendar에서는 대조 자극보다 높게 나타났으며, jasmin에서는 대조자극보다 낮은 값이 나타나는 경향을 보였다. 결론적으로 안정과 각성의 후각 자극으로 인한 감성의 변화를 뇌파와 자율신경계 등의 생체지표로 관찰할 수 있었다.정하는 감성요인의 차이를 알 수 있었으며 또한 essential oil에서는 성별 차이가 없는데 반해 페르몬 향의 경우 성별의 차이를 나타내었다.. 방법을 타액과 혈청내 testosterone 농도 측정에 응용하여 RIA의 결과와 비교하여 본 바 상관관계가 타액에서 r=0.969, 혈청에서 r=0.990으로 두 결과가 잘 일치하였다. 본 실험에서 측정된 한국인 여성의 타액내 testosterone농도는 107.7$\pm$12.0 pmol／l이었고, 남성의 타액내 농도는 274.2$\pm$22.1 pmol／l이었다. 이상의 결과로 보아 본 연구에서 정립된 EIA 방법은 RIA를 대신하여 소규모의 실험실에서도 활용할 수 있을 것으로 사려된다.또한 상실기 이후 배아에서 합성되며, 발생시기에 따라 그 영향이 다르고 팽창과 부화에 관여하는 것으로 사료된다. 더욱이, 조선의 ${\ulcorner}$구성교육${\lrcorner}$이 조선총독부의 관리하에서 실행되었다는 것을, 당시의 사범학교를 중심으로 한 교육조직을 기술한 문헌에 의해 규명시켰다.nd of letter design which represents -natural objects and was popular at the time of Yukjo Dynasty, and there are some documents of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the letter design. Asite- is also considered to have been "Japanese Letter Jobcheso." Therefore, the purpose of this study is to loo

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.898-904
• /
• 2021

This experimental study aims to investigate the use of a wet electrostatic precipitator as a post-treatment device to satisfy the strict emission regulations for sulfur oxides and particulate matter (PM). The inlet/outlet of a wet electrostatic precipitator was installed in a funnel using a marine four-stroke diesel engine (STX-MAN B&W) consuming marine heavy fuel oil (HFO) with a sulfur content of about 2.1%. Measurements were then obtained at the outlet of the wet electrostatic precipitator; an optical measuring instrument (OPA-102), and the weight concentration measurement method (Method 5 Isokinetic Train) were used for the PM measurements and the Fourier transform infrared (FT-IR; DX-4000) approach was used for the sulfur oxide measurements. The experimenst were conducted by varying the engine load from 50%, to 75% and 100%; it was noted that the PM reduction efficiency was a high at about 94 to 98% under all load conditions. Additionally, during the process of lowering the exhaust gas temperature in the quenching zone of the wet electrostatic precipitator, the sulfur dioxide (SO₂) values reduced because of the cleaning water, and the reduction rate was confirmed to be 55% to 81% depending on the engine load.