• Journal of Advanced Marine Engineering and Technology
• /
• 제28권5호
• /
• pp.754-761
• /
• 2004

In this paper, evaporating heat transfer characteristics in the refrigeration and air-conditioning facilities were studied using the environmentally friendly refrigerants R-1270 (Propylene). R-290 (Propane). R-600a (Iso-butane) and HCFC refrigerant R-22 The test tube was surrounded by an annulus with water flowing counter to the refrigerant. The tube is copper. with an outside diameter of 12.7mm and the wall thickness of 1.315mm. The test results showed that the local evaporating heat transfer coefficients of hydrocarbon refrigerants were superior to that of R-22 and the maximum increasing rate of heat transfer coefficient was found in R-1270. The average evaporating heat transfer coefficient increased with the increase of the mass velocity and it showed the higher values in hydrocarbon refrigerants than R-22 Comparing the heat transfer coefficient of experimental results with that of other correlations. the presented results had agood agreement with the Kandlikar's correlation. This results form the investigation can be used in the design of heat transfer exchangers using hydrocarbons as the refrigerant for the air-conditioning systems.

• Journal of Welding and Joining
• /
• 제17권3호
• /
• pp.36-43
• /
• 1999

The effect of Si content in welding wires on spattering characteristics and droplet transfer phenomena was studied. In MAG welding using 80% Ar-20% $CO_2$ shielding gas, spattering characteristics and droplet transfer phenomena were varied with Si content of wire. With increasing Si content, the spattering ratio and the ratio of large size spatter $(d\geq1.0mm)$ were increased. The increase of Si content in molten metal made surface tension increase due to reduction of oxygen content, which resulted from deoxidizing action of silicon. The increase of surface tension resulted in unstable transfer phenomena and arc instability in both short circuit and spray region. With changing Si content of wire, spattering characteristics and droplet transfer phenomena was directly influenced by the variation of surface tension, compared with the effect of arc stability.

• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.315-320
• /
• 2015

Characteristics of gas-liquid mass transfer and interfacial area were investigated in a bubble column of diameter and height of 0.102 m and 2.5 m, respectively. Effects of gas and liquid velocities on the volumetric gas-liquid mass transfer coefficient ($k_La$), interfacial area (a) and liquid side true mass transfer coefficient ($k_L$) were examined. The interfacial area and volumetric gas-liquid mass transfer coefficient were determined directly by adopting the simultaneous physical desorption of $O_2$ and chemical absorption of $CO_2$ in the column. The values of $k_La$ and a increased with increasing gas velocity but decreased with increasing liquid velocity in the bubble column which was operated in the churn turbulent flow regime. The value of $k_L$ increased with increasing gas velocity but did not change considerably with increasing liquid velocity. The liquid side mass transfer was found to be related closely to the liquid circulation as well as the effective contacting frequency between the bubbles and liquid phases.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권5호
• /
• pp.552-557
• /
• 2007

This paper has dealt with the effect of non ionized surfactant and water mixture on drag reduction and heat transfer enhancement in a circular pipe flow with experimentally. The test section was consisted of stainless steel pipe with inside diameter of 16mm. The wire coil was used to increase heat transfer in a pipe and the on ionized surfactant(Oleyl Dihydroxyethyl Amino Oxide, ODEAO) was used to reduce the drag force of water mixture with surfactant. The main parameters of this experiment were diameter and pitch of wire coil and the ratio of test section length and horizontal wire coil length. In this experiment, the acquired results were 1) Drag reduction effect existed in this ODEAO-water mixture, 2) Friction factor and heat transfer were increased with insertion the heat transfer enhancement coil, 3) With increasing of pitch ratio, heat transfer was decreased, and 4) Heat transfer was decreased by the decreasing of inserting coil diameter.

• 설비공학논문집
• /
• 제12권6호
• /
• pp.533-540
• /
• 2000

Condensation heat transfer characteristics have been investigated experimentally when a water vapor is condensed on the outside of a horizontal copper tube in a condenser. This problem is of particular interest in the design of a LiBr-water absorption system. Hydrophilic surface modification was performed to increase the wettability on the copper tube. The optimum hydrophilic treatment condition using acethylene and nitrogen as reaction gas is also studied in detail. The results obtained indicate that the optimum reaction gas ratio of acethylene to nitrogen for hydrophilic surface modification was found to be 7 : 3 for the best condensation heat transfer. In the wide ranges of coolant inlet temperatures, and coolant mass flow rates, both the condensation heat transfer rate and the condensation heat transfer coefficient of a hydrophilic copper tube are increased substantially, compared with those of a conventional copper tube used in a condenser. It is also found that the condensation heat transfer enhancement by the hydrophilic surface modification still emains even after a hundred cycles of wet/dry processes.

• 한국수정란이식학회지
• /
• 제14권3호
• /
• pp.155-162
• /
• 1999

This study was carried out to establish an effective system for embryo transfer of techniques by analyzing several factors affecting the gestation length and the weight changes of calves produced from embryo transfer in Korean cattle. The results obtained in study on factors affecting the gestation length and the weight changes of calves produced from embryo transfer were as fallow; 1) The gestation length and the birth weight did not differ between male and female, but the weight changes after birth were remarkablely different between sex(P<0.05). 2) The gestation length between heifers and cows was not different, and body weights at birth and 6 months were remarkabley heavy in cows(P<0.05). Weight changes after 6 months were not different. 3) The gestation length and the birth weight were significantly different between the single and twin calving (P<0.05). Weight of twin at 6 and 12 months were remarkabely light. 4) Calving seasons did not affect the gestation length the and the birth weight. Weaning weight was significantly heavy(P<0.05), but weight changes after weaning were no different among the calving seasons. Conclusivley, this results suggest that cows will be better when considering growth of calves and twin produced from embryo trnsfer in Korean cattle.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.827-834
• /
• 2019

Wireless power transfer via coupled magnetic resonances has been a hot research topic in recent years. In addition, the number of related devices has also been increasing. However, reverse signals transfer is often required in addition to wireless power transfer. The structure of the circuit for a wireless power transfer system via coupled magnetic resonances is analyzed. The advantages and disadvantages of both parallel compensation and series compensation are listed. Then the compensation characteristics of the inductor, capacitor and resistor were studied and an appropriate compensation method was selected. The reverse signals can be transferred by controlling the compensation of the resistor. In addition, it can be demodulated by extracting the change of the primary current. A 3.3 MHz resonant frequency with a 100 kHz reverse signals transfer system platform was established in the laboratory. Experimental results demonstrate that wireless power and reverse signals can be transferred synchronously.

• 한국수정란이식학회지
• /
• 제10권1호
• /
• pp.83-90
• /
• 1995

Production of calves after transfer of nuclear transplant embryos is the latest technology to be applied in commercial livestock breeding. The objective of this study was to establish an efficient procedure to produce offsprings from nuclear transplant embryos. The fusion rates (72.7% vs. 80.8%), cleavage rates (62.5% vs. 71.4%) and rates of development in vitro (12.0% vs. 15.2%) of nuclear transplant embryos were not significantly different between 30 and 40h maturation age of cytoplast. The in vivo and in vitro-derived embryos as nuclei donor were used in this system of bovine nuclear transplantation. Fusion rates of nuclear transplant embryos were not significantly different between in vivo and in vitro-derived embryos (73.0 and 79.2%, respectively). The percentage of embryos reaching the morulae or blastocysts were 21.8% for in vivo-derived embryos and 11.9% for in vitro-derived embryos (p<0.01). Pregnancy rates after embryo transfer of nuclear transplant embryos were not significantly different between in vivo and in vitro-derived embryos (45.9 and 40.5%, respectively). However, calving rates after embryo transfer of nuclear transplant embryos were significantly higher in the in vivo-derived embryos than in vitro (p<0.01). Further research for age of cytoplast and use of in vitro-derived embryos as nuclei donor is required in this system. In conclusion, these results clearly show that the use of in vitro-derived oocytes as recipient cytoplast can improve the nuclear transplant system for genetic progress in cattle.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.71-72
• /
• 2014

The current paper introduce the flame transfer function calculation results using CFD in order to quantify the heat release fluctuations in a lean premixed gas turbine combustor. Comparisons of the modeled and measured flame shapes were made using the optimized heat transfer conditions.

• 한국수정란이식학회:학술대회논문집
• /
• 한국수정란이식학회 2005년도 제5회 발생공학 국제심포지엄 및 학술대회
• /
• pp.87-88
• /
• 2005