• 대한미생물학회지
• /
• 제19권1호
• /
• pp.11-24
• /
• 1984

Shigella remains to be an important enteric pathogen in this country for the present. Moreover, most of the isolates have become multiple resistant to various antibiotics which used to be drugs of choice for shigellosis. This study was made as an attempt to assess the present stage of antibiotic resistance and the incidence and transferability of R factors of Shigella. A total of one hundred and seventeen strains of Shigella isolated from patients in Seoul and provincial area between 1982 and 1983 were tested for their resistant to antimicrobial agents and transmission of R-plasmid. Antibiotic susceptibilities were determined by an agar dilution method. Muller hinton agar were used for the assay of drug resistance and tryptic soy broth were used for propagating medium for conjugation. Shigella isolated found to be one or more antibiotics were considered potential donor of R-plasmid. The following results were obtained. 1. Among 117 strains of Shigella isolated, 111 strains(94.9%) were found to be resistant to one or more drugs tested and 97.3% of these resistant strains were multiply resistant, indicating the multiply resistant strains were more than the single resistant strains. Only six strains were susceptible to all drugs tested. 2. Among 117 strains of Shigella isolated, 107 strains(91.5%) were resistant to Tetracyclin(Tc), 106 strains(90.6%) to Chloramphenicol(Cp) and Streptomycin(Sm), 97 strains(82.9%) to Ampicillin(Ap), 68 strains(58.1%) to Cephaloridine(Cr), 10 strains(8.5%) to Nalidixic acid(Na), 5 strains(4.3%) to Kanamycin(Km) and 2 strains(1.7%) to Rifampicin. No strain was resisfant to Amikacin(Ak) and Gentamicin(Gm). 3. All drug-resistant Shigella strains, except three, were multiply resistant to two or more drugs. Fifty eight strains were resistant to five drugs, followed by 26 strains resistant to dour drugs, 12 strains resistant to three drugs and 11 strains resistant to six drugs. 4. The 73% of multiply drug-resistant Shigella transferred their resistance to E. coli by conjugation and the resistance was considered to be mediated by R-plasmid. Resistance to Nalidixic acid and Rifampicin were not transferred by conjugation to recipient. As for the transferability of resistance to each seperate drug, Ap resistance was transferred with 73.2% frequence and Cm and Tc resistance were transferred with approximately 50-60% frequence whereas Sm and Cr resistance were transferred in 19.1-21.4% The other four drugs resistant failed to transfer their resistance to recipient. 5. As for the incidence and transferability of resistance to each seperate drug, the strains resistant to Tc and Cm were encountered most frequently with the rate of 91-92%, whereas transfer of Tc and Cm were low, 51-52%. The incidence of Sm resistance was very high(90.6%) but transferability of drugs resistance was much lower(25.4%). Though the incidence of Km reristance was much lower(4.3%) transferability of Km resistance was considerably higher(60%). 6. The greater the multiplicity of resistance, the greater was the likelihood that part of all of the resistance markers would be transferable.

• 센서학회지
• /
• 제18권1호
• /
• pp.86-94
• /
• 2009

Temperature measurement capability was inter-compared using the transfer standard platinum resistance thermometers(SPRT) among four laboratories of KRISS. The transfer SPRTs were primarily calibrated at the triple point of water and Ga melting point, then used at inter-comparison experiment. Temperature difference of calibration value between temperature laboratory and length laboratory at $20^{\circ}C$ was -0.7 mK and +2.4 mK at density laboratory. Temperature measured near $20^{\circ}C$, $25^{\circ}C$ and $30^{\circ}C$ at fluid flow laboratory was deviated by $34.2{\sim}80.4\;mK$ from the calibration values of the transfer SPRT. Ga melting points was inter-compared among three laboratories, and the difference of Ga melting points against the standard Ga melting point of temperature laboratory were $0.03{\sim}0.54\;mK$ at length laboratory and 0.02 mK at density laboratory.

• 에너지공학
• /
• 제24권4호
• /
• pp.71-80
• /
• 2015

PVC 프레임의 취약한 강도를 보완하기 위해 사용되는 철재 보강재는 상대적으로 높은 열전도 특성으로 인해 PVC 프레임의 전체적인 열 성능을 떨어뜨리는 역할을 한다. 본 연구는 철재 보강재의 타공을 통해 표면적을 줄임으로서 전열 면적의 감소를 통한 열저항 특성을 개선하고, 감소된 만큼 두께를 높임으로서 타공으로 인한 강도 저하를 보완하였다. 이에 대한 성능을 평가하기 위해 PVC frame, PVC frame + original steel stiffener, PVC frame + 30% perforated steel stiffener, PVC frame + 50% perforated steel stiffener, PVC frame + 65% perforated steel stiffener 등 5개의 시험체를 구성하였으며, 시험 방법은 수식과 시뮬레이션에 의한 방법을 적용하였다. 시험 결과 PVC frame + 65% perforated steel stiffener이 열저항 특성과 강도특성에서 가장 높은 것으로 평가되었다.

• 전기전자학회논문지
• /
• 제26권3호
• /
• pp.373-379
• /
• 2022

LTV(Light to Voltage) 변환을 위한 APD(Avalanche Photo Diode)는 다른 PD(Photo Diode)와 다르게 높은전압의 동작영역을 사용하므로 TIA(Transimpedance Amplifier) 사용시 과전류 방지를 위해 Quenching 저항을 직렬로 연결하여야 한다. 그러한 경우 Quenching 저항이 TIA 전달함수에 영향을 미쳐 안정도에 심각한 결과를 초래할 수 있다. 본 논문에서는 APD Quenching 저항이 TIA의 전압과 전류 루프 전달함수에 미치는 영향을 분석하여 안정도 개선을 위한 Quenching 저항 값 결정 방법을 제안하고자 한다. 제안된 방법에 의하여 Quenching 저항을 가지는 TIA 회로를 설계하여 시뮬레이션 및 칩 제작을 통하여 동작의 안정도를 검증하였다.

• 한국수소및신에너지학회논문집
• /
• 제34권3호
• /
• pp.283-291
• /
• 2023

The physical properties were analyzed for four gas diffusion layers, and gas diffusion electrodes (GDEs) for the cathode of high-temperature polymer electrolyte membrane fuel cell were fabricated through bar coating with three binder to carbon (B/C) ratios. Among them, The GDE from JNT30-A6P showed a significant change in secondary pore volume at a B/C ratio of 0.31, which had the largest pore volume among all GDEs. In the polarization curve, JNT30-A6P GDE showed the best membrane electrode assembly (MEA) performance with a peak power density of 384 mW/cm² at a a B/C ratio of 0.31. From the distribution of relaxation time analysis, the peak 1 corresponding to mass transfer resistance of oxygen reduction reaction (ORR) was significantly reduced in the JNT30-A6P GDE. This is the result that when the binder content decreased, the volume of the secondary pore increased, and the mass transfer resistance of ORR decreased, which played an essential role in the MEA performance.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1996년도 가을 학술발표회 논문집
• /
• pp.81-90
• /
• 1996

• Journal of Magnetics
• /
• 제19권3호
• /
• pp.291-294
• /
• 2014

In this paper, we examine the electrical and magnetic properties of three different types of shield materials used for wireless power transfer systems: namely, FeSiAl-composite, NiZn-ferrite, and FeSi-amorphous types. The power transfer efficiency and resistance of an RX coil are measured, while varying the shield thickness. For all three types, a thicker shield provides better power transfer efficiency. Analysis of the measurements shows that the FeSiAl-composite type is suitable for systems with size limitation. In terms of magnetic properties, the FeSi-amorphous type shows the best features, and is suited to high power applications. This work can be used as a guideline to select suitable shielding material in various wireless power transfer systems.

• Membrane and Water Treatment
• /
• 제4권4호
• /
• pp.251-263
• /
• 2013

The internal reflux effect on dialysis through the retentate phase of a countercurrently cross-flow rectangular module is investigated. Theoretical analysis of mass transfer in cross-flow devices with or without recycling is analogous to heat transfer in cross-flow heat exchangers. In contrast to a device without reflux, considerable mass transfer is achievable if cross-flow dialyzers are operated with reflux, which provides an increase in fluid velocity, resulting in a reduction in mass-transfer resistance. It is concluded that reflux can enhance mass transfer, especially for large flow rate and feed-concentration operated under high reflux ratio.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1154-1161
• /
• 2016

The heat transfer characteristics between liquid lead bismuth eutectic (LBE) and helium are of great significance for the two-loop cooling system based on an accelerator-driven system (ADS). This paper presents an experimental study on the resistance characteristics and heat transfer performance in a LBE-helium experimental loop of ADS. Pressure drops in the LBE loop, the main heat transfer, and the coupled heat transfer characteristics between LBE and helium are investigated experimentally. The temperature of LBE has a significant effect on the LBE thermo-physical properties, and is therefore considered in the prediction of pressure drops. The results show that the overall heat transfer coefficient increases with the increasing helium flow rate and the decreasing inlet temperature of helium. Increasing the LBE Reynolds number and LBE inlet temperature promotes the heat transfer performance of main heat transfer and thus the overall heat transfer coefficient. The experimental results give an insight into the flow and heat transfer properties in a LBE-helium heat exchanger and are helpful for the optimization of an ADS system design.

• Journal of Plant Biotechnology
• /
• 제37권4호
• /
• pp.562-566
• /
• 2010

SOD2-transgenic $T_3$ petunia line (A2-36-2-1-1-35) was treated with different levels of methyl viologen (MV) to determine its resistance to oxidative stress. Four (4) levels of MV (0, 100, 200, and $400\;{\mu}M$) were applied. The SOD2-transgenic $T_3$ petunia line exhibited a very significant oxidative stress resistance at the highest MV concentration ($400\;{\mu}M$) treatment compared to non-transgenic plant. RNA and protein expression of SOD2 transgene and higher parenchyma cell density in the transgenic petunias exhibiting resistance to oxidative stress proves its contribution to the expression of its resistance to oxidative stress.