• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.10
• /
• pp.1656-1665
• /
• 1997

The intake noise, a major source of vehicle noises, has rapidly become a noticeable, and has been studied to reduce the level. Traditionally, the intake system has been developed through a experiment, namely, the trial and error process. This approach requires very high cost and long time consuming to develop the systm. Recently, FEM and BEM are becoming useful in analysis of the intake system, and the results of analysis are very valid. But because this techniques also require high cost and long analysis time, this technique is generally not practical tool at the early stage of the development. In this study, the software was developed to predict and analyze the acoustic characteristics of the intake system. It was based on the Transfer Matrix Method and operated to analyze a simplified intake system in a personal computer. It can be used early in the design stage of development of the intake system. This study presented a improvement to reduce the level of the intake noise, which modified the specification of the intake system. And the improvement were verified by NIT/SYSNOISE, FE analysis commercial software, and testing a prototype.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.10
• /
• pp.1648-1655
• /
• 1997

The intake noise, a major source of vehicle noises, has rapidly become a noticeable, and has been studied to reduce the level. Traditionally, the intake system has been developed through a experiment, namely, the trial and error process. This approach requires very high cost and long time consuming to develop the system. Recently, FEM and BEM are becoming useful in analysis of the intake system, and te results of analysis are very valid. But because these techniques also require high cost and long analysis time, these are generally not practical tool at the early stage of the development of an intake system. In this study, the software was developed to predict and analyze the acoustic characteristics of an intake system. It was based on the Transfer Matrix Method and operated to analyze a simplified intake system in a personal computer. It can be used early in the design stage of development of the intake system. This study presented an improvement to reduce the level of an intake noise. It was to select the optimum position of a resonator and verified by NIT/SYSNOISE, FE analysis commercial software, and testing a prototype.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.190-193
• /
• 2005

The air filter in engine intake system filters the dirt in the breathing air but also it attenuates the noise although the phenomenon has been regarded negligible. For the analysis of the acoustical performance of air filter, an acoustical model is suggested in this paper. The air filter consists of a porous filter element, which catches the particulate dirt, and a plastic filter box, which supports the filter element. Fibrous structure of the filter element is modeled as a micro-perforated panel using the flow resistivity and porosity. The pleated geometry of the filter element is modeled as two coupled ducts and a mathematical model is developed for the analysis of sound propagation. The filter box Is modeled as a rigid rectangular box. By combining two models, a 4-pole transfer matrix for the air filter is derived. The transmission loss calculated using the transfer matrix of the suggested model is compared with the measured data. Reasonably good agreement is observed. The result can be improved by considering the visco-thermal effect in modeling, in particular at a frequency range near the troughs of TL curve.

• Structural Engineering and Mechanics
• /
• v.17 no.2
• /
• pp.245-266
• /
• 2004

Incremental launching method is one of the highly competitive techniques for construction of concrete bridges. It avoids costly and time consuming form work and centralizes all construction activities in a small casting yard, thus saving in cost and time against conventional bridge construction. From the quality point of view, it eliminates the uncertainty of monolithic behaviour by allowing high repetitiveness and industrial environment. But, from analysis and design point of view, the most characteristic aspect of incrementally launched bridges is that, it has to absorb the stresses associated with the temporary supports that are gradually taken on by the deck during its launch. So, it is necessary to analyse the structure for each step of launching which is a tedious and time consuming process. Effect of support settlements or temperature variation makes the problem more complex. By using transfer matrix method, this problem can be handled efficiently with minimal computational effort. This paper gives insight into method of analysis, formulation for optimization of the structural system, effect of support settlement and temperature gradient, during construction, on the stress state of incrementally launched bridges.

• Journal of Embryo Transfer
• /
• v.10 no.2
• /
• pp.171-175
• /
• 1995

This study was performed to establish the condition and the methods for the techniques of insertion the isolated blastomere cells into cytoplasm, in order to research the develop-mental ability of bovine embryo blastomere cells in vitro produced. After 24h in vitro ovary maturation with the ovaries from a slaughter house, in vitro fertilization was performed to the vital sperms which their mobility were decided by percoll gradient method, with 2~8 cell stage embryos, the blastomeres were isolated in $Ca^2$+. $Mg^2$+-free PBS, and following that embedded into agar and alginate solution, respectively. The rates of in vitro develop-ment are as follows ; in agar embedded 11 among 120(9.2%) 1 /2~1 /3 blastomers cleaved and 6 among 93(6.5%) 1 /4~1 /8 blastomeres cleaved. In sodium alginate-embedded 14 among 84(16.7%) 1 /2~1 /3 blastomeres cleaved and 6 among 85(7.1%) 1 /4~1 /8 blastomeres cleaved. In case of Na-alginate, the rate of the cells were better than those of agar. The results suggest that the techniques for embeeding the isolated blastomeres into gel may help cloning of bovine early embryo without nuclear transplantation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.9
• /
• pp.606-613
• /
• 2015

In this study, the torsional vibration analysis for a marine propulsion system is carried out by using the transfer matrix method(TMM). The torsional moment produced by gas pressure and reciprocating inertia force may yield severe torsional vibration problem in the shaft system which results in a damage of engine system. There are several ways to control the torsional vibration problem at hand, firstly natural frequencies can be changed by adjusting shaft dimensions and/or inertia quantities, secondly firing order and crank arrangement are modified to reduce excitation force, and finally lower the vibration energy by adopting torsional vibration damper. In this paper, the viscous torsional vibration damper is used for reducing the torsional vibration stresses of shaft system and it is conformed that optimum model of the viscous damper can be determined by selecting the geometric design parameters of damper and silicon oil viscosity.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.1
• /
• pp.123-134
• /
• 1992

The reduction of the airborne noise level is essential to the comfortability for mien and passengers in ships. In this paper, the acoustic characteristics on the multilayered acoustic panel with the Helmholtz resonator was described analytically and experimentally. The design software based on the Transfer Matrix Analysis(TMA) method for the acoustic enclosing panel was developed. According to the change of the design parameters of the panel, verious transmission losses were obtained using the developed software. As a result, it was verified that the acoustic characteristics of the composite panel was excellent in comparison with the conventional acoustic partitioning structures. This panel can be applicable to the acoustic enclosure system.

• Structural Engineering and Mechanics
• /
• v.21 no.6
• /
• pp.635-658
• /
• 2005

The possibility of detecting a crack in L-shaped pipes filled with fluid based on measurement of transverse natural frequencies is examined. The problem is solved by representing the crack by a massless rotational spring, simulating the out-of-plane transverse vibration only without solving the coupled torsional vibration and using the transfer matrix method for solution of the governing equation. The theoretical solutions are verified by experiments. The cracks considered are external, circumferentially oriented and have straight front. Pipes made of aluminium and mild steel are tested with water as internal fluid. Crack size to pipe thickness ratio ranging from 0.20 to 0.57 and fluid (gauge) pressure in the range of 0 to 10 atmospheres are examined. The rotational spring stiffness is obtained by an inverse vibration analysis and deflection method. The details of the two methods are given. The results by the two methods are presented graphically and show good agreement. Crack locations are also determined by the inverse analysis. The maximum absolute error in the location is 13.80%. Experimentally determined variation of rotational spring stiffness with ratio of crack size to thickness is utilized to predict the crack sizes. The maximum absolute errors in prediction of crack size are 17.24% and 16.90% for aluminium and mild steel pipes respectively.

• Structural Engineering and Mechanics
• /
• v.74 no.1
• /
• pp.33-54
• /
• 2020

The aim of this study is to calculate natural frequencies and harmonic responses of cracked frames with general boundary conditions by using transfer matrix method (TMM). The TMM is a straightforward technique to obtain harmonic responses and natural frequencies of frame structures as the method is based on constructing a relationship between state vectors of two ends of structure by a chain multiplication procedure. A single variable shear deformation theory (SVSDT) is applied, as well as, Timoshenko beam theory (TBT) and Euler-Bernoulli beam theory (EBT) for comparison purposes. Firstly, free vibration analysis of intact and cracked frames are performed for different crack ratios using TMM. The crack is modelled by means of a linear rotational spring that divides frame members into segments. The results are verified by experimental data and finite element method (FEM) solutions. The harmonic response curves that represent resonant and anti-resonant frequencies directly are plotted for various crack lengths. It is seen that the TMM can be used effectively for harmonic response analysis of cracked frames as well as natural frequencies calculation. The results imply that the SVSDT is an efficient alternative for investigation of cracked frame vibrations especially with thick frame members. Moreover, EBT results can easily be obtained by ignoring shear deformation related terms from governing equation of motion of SVSDT.

• Nuclear Engineering and Technology
• /
• v.26 no.2
• /
• pp.277-284
• /
• 1994

Much attention has been given to predict the near-field mass transfer of a single radioactive species from a waste solid into surrounding porous medium. But only limited considerations have been given to predict the coupled mass transfer of species with a radioactive decay chain. In this study we present an analysis assuming that the members of a decay chain dissolve congruently with a solubility-limited matrix. We give general, non-recursive analytic solutions for the transport of a radioactive decay chain in a finite porous medium when nuclides are released congruently with the matrix. As an illustration we consider the decay chain $^{234}$ Ulongrightarrow$^{230}$ Thlongrightarrow$^{226}$ Ra from spent fuel. These solutions may be useful and potentially important in performance assessment of radioactive waste repositories.