• International Journal of Precision Engineering and Manufacturing
• /
• 제4권2호
• /
• pp.57-63
• /
• 2003

A new method using a transfer function was proposed in the previous paper for analyzing motion errors of hydrostatic tables. The calculated motion errors by the new method, named as the transfer (unction method (TFM), were compared with the results by the conventional multi pad method, and the validity of the proposed method was theoretically verified. In this paper, the relationship between rail form error and motion errors of a hydrostatic table is examined theoretically in order to comprehand so-called 'the averaging effect of an oil film', and the characteristics of the motion errors in a hydrostatic table is tested. The tested hydrostatic table has three single-side pads in the vertical direction and three pairs of double-sides pads in the horizontal direction. The motion errors are tested for three rails which have different form errors. The experimental results are compared with the theoretical results calculated by the TFM, and both results show good agreement. From the results, it is shown that the TFM is very effective to analyze the motion errors of hydrostatic tables.

• 한국자동차공학회논문집
• /
• 제5권4호
• /
• pp.152-159
• /
• 1997

This paper presents a vibration analysis method of crank shaft of six cylinder internal combustion engine. For simple analysis journal, pin and arm parts were assumed to have uniform section. Transfer Matrix Method was used, considering branched part and coordinate transformation part. Natural frequencies, modeshapes and transfer functions of crank shaft were investigated based upon the Euler beam theory: It was shown that the calculated natural frequencies, modeshapes agree well with the existing paper results.

• 제어로봇시스템학회지
• /
• 제1권1호
• /
• pp.50-50
• /
• 1995

It has been pointed out in the literature that the Routh approximation method for order reduction has limitations in treating transfer functions with the denominator-numerator order difference not equal to one. The purpose of this paper is to present a new algorithm based on the Routh approximation method that can be applied to general rational transfer functions, yielding reduced models with arbitrary order.

• 사물인터넷융복합논문지
• /
• 제8권2호
• /
• pp.79-84
• /
• 2022

본 논문은 문서의 보안과 손실 및 오염에 대하여 복원능력을 향상시키는 방안을 제안한다. 이를 위해서 암호화로 DnCNN(DeNoise Convolution Neural Network)을 제시한다. 암호화 방법을 구현하기 위하여 2D이미지정보를 광학에 사용되는 공간주파수 전달함수(Spatial Frequency Transfer Function)의 수학적 모델을 적용한다. 공간 주파수 전달함수를 사용하여 광학적 간섭 패턴을 암호화로 사용하고 공간 주파수 전달함수의 수학적 변수를 복호화하는 암호로 사용하는 방법을 제안하였다. 또한, 딥러닝을 적용한 DnCNN 방법을 적용하여 노이즈 제거하여 복원 성능을 개선한다. 실험결과, 65%의 정보 손실이 있는 경우에도 Pre-Training DnCNN Deep Learning을 적용한 결과 공간 주파수 전달함수만을 활용한 복원 결과 와 비교하여 PSNR(Peak Signal-to-noise ratio)을 11% 이상 우수한 성능을 확인할 수 있다. 또한, CC(Correlation Coefficient)의 특성도 16% 이상 우수한 결과를 보이고 있다.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.135-142
• /
• 1998

In this study, the frequency transfer function of motions are predicted from the result of a full-scale seakeeping trials. Because the real sea has the characteristics of multi-directional waves,we compare the results in the one directional waves with ones in the directional waves. For calculation of the frequency transfer function in the directional waves, Takezawa's inverse estimation method was introduced and the frequency ranges were divided into three parts in order to consider following seas. The full-scale seakeeping trials was executed in the south sea of Korea using the stern trawler. Those results show that analysis method of the multi-directional waves is more reliable than that of one directional waves, and confirm the possibility of applying this method to the full-scale seakeeping trials.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.241_242
• /
• 2009

This paper presents a method to assess total transfer capability (TTC) by using energy function. To get the critical energy, the potential energy boundary surface(PEBS) method which is one of the transient energy function(TEF) method is used. TTC assessment is to calculate TTC by using the repeated power flow (RPF) method. It is seen that energy margin can be use to assess available transfer capability(ATC).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.258-259
• /
• 2007

In this paper, the secant method is adopted to improve a transfer function required by specific filtration properties. It is advantageous over the conventional and widely used 'Template method' in that it enables users to seek the position of a pole which will turn out to meet well the requirements of in-band insertion loss as well as stop-band rejection even after a small number of iterative steps. For validating the proposed method, the transfer function of a 4-pole waveguide filter is targeted.

• International Journal of Computer Science & Network Security
• /
• 제21권8호
• /
• pp.212-218
• /
• 2021

The Proportional Integral Derivative (PID) controller is the most popular industrial controller and more than 90% process industries use this controller. During the past 50 years, numerous good tuning methods have been proposed for Single Input Single Output Systems. However, design of PI/PID controllers for multivariable processes is a challenge for the researchers. A comparative study of three PID controllers design methods has been carried-out. These methods include the DS (Direct Synthesis) method, IMC (Internal model Control) method and ETF (Effective Transfer Function) method. MIMO PID controllers are designed for a number of 2×2, 3×3 and 4×4 process models with multiple delays. The performance of the three methods has been evaluated through simulation studies in Matlab/Simulink environment. After extensive simulation studies, it is found that the Effective Transfer Function (ETF) Method produces better output responses among two methods. In this work, only decentralized methods of PID controllers have been studied and investigated.

• International Journal of Computer Science & Network Security
• /
• 제21권9호
• /
• pp.11-18
• /
• 2021

The Proportional Integral Derivative (PID) controller is the most popular industrial controller and more than 90% process industries use this controller. During the past 50 years, numerous good tuning methods have been proposed for Single Input Single Output Systems. However, design of PI/PID controllers for multivariable processes is a challenge for the researchers. A comparative study of three PID controllers design methods has been carried-out. These methods include the DS (Direct Synthesis) method, IMC (Internal model Control) method and ETF (Effective Transfer Function) method. MIMO PID controllers are designed for a number of 2×2, 3×3 and 4×4 process models with multiple delays. The performance of the three methods has been evaluated through simulation studies in Matlab/Simulink environment. After extensive simulation studies, it is found that the Effective Transfer Function (ETF) Method produces better output responses among two methods. In this work, only decentralized methods of PID controllers have been studied and investigated.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.489-493
• /
• 2004

The Modulation Transfer Function (MTF) is commonly used to characterize the spatial quality of imaging systems. This work is the attempt to measure the MTF for KOMPSAT EOC using the non-parametric method as ground inputs. The spatial performance of the KOMPSAT EOC was analyzed by edge method while in flight using multi-temporal image data collected over test site in Seoul. The results from this work demonstrate the potential applicability of this method to estimate MTF for high spatial resolution satellite KOMPSAT-2 that is being developed to be launched in 2005.