• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1114-1121
• /
• 2007

홈 네트워크는 가정 내의 가전기기들이 모여 하나의 네트워크를 이루는 것으로 가전기기들의 발전함에 따라 확장되어 가고 있으며, 또한 디지털 콘텐츠의 수도 꾸준히 증가하고 있다. 그러나 콘텐츠 가전기기 사이에 상호 운영성 부족으로 디지털 콘텐츠의 지속적인 저작권 보호가 힘들 뿐 아니라, 가전기기 간에 콘텐츠 이동을 위해서는 DRM 서버로부터 라이선스를 다시 재발급 받아야 한다. 따라서 본 논문에서는 홈 네트워크 안에서 디바이스 상호 인증을 통해 콘텐츠를 다른 디바이스로 자유롭게 이동 할 수 있는 프레임워크를 제안하며, DRM 서버의 라이선스 관리 부담을 줄이고 외부의 사용자가 홈 네트워크에 접근하더라도 사용자를 인증을 통해 콘텐츠 사용이 가능한 시스템을 제안한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.308-311
• /
• 2000

The organic electroluminescene (EL) device has gathered much interested because of its potential in materials and simple device fabrication. We fabricated EL device which have a mixed single emitting layer containing N,N'-diphenyl-N,N'-(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine [TPD] and poly(3-hexylthiophene) [P3HT]. The molar ratio between P3HT and TPD chaged with 1:1, 3:1, 5:1, 3:2 and 5:2. EL intensity of ITO/P3HT+TPD/Mg:In devices is enhanced by addition of TPD into P3HT. This can be explained that the energy transfer occurs from TPD to P3HT. Recombination probability increases in emitting layer because that TPD as hole transport material plays a role more injection hole and Mg:In (3.7eV) electrode has low work function make easily electron injection. ITO/P3HT+TPD(5:2)/Mg:In devices emit orange-red light at 28V.

• 한국안전학회지
• /
• 제16권2호
• /
• pp.57-62
• /
• 2001

In order to analyze the mechanism of semiconductor device damages by ESD, this paper adopts a new charged-device model(CDM), field-induced charged nudel(FCDM), simulator that is suitable for rapid routine testing of semiconductor devices and provides a fast and inexpensive test that faithfully represents ESD hazards in plants. The high voltage applied to the device under test is raised by the fie]d of non-contacting electrodes in the FCDM simulator. which avoids premature device stressing and permits a faster test cycle. Discharge current md time are measured and calculated The FCDM simulator places the device at a huh voltage without transferring charge to it, by using a non-contacting electrode. The only charge transfer in the FCMD simulator happens during the discharge. This paper examine the field charging mechanism, measure device thresholds, and analyze failure modes. The FCDM simulator provides a Int and inexpensive test that faithfully represents factory ESD hazards. The damaged devices obtained in the simulator are analyzed and evaluated by SEM Also the results in this paper can be used for to prevent semiconductor devices from ESD hazards.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2577-2582
• /
• 2013

A novel stick-shaped portable sensing device featuring a microhole array interface between the polyvinylchloride-2-nitrophenyloctylether (PVC-NPOE) gel and water phase was developed for in-situ sensing of perchlorate ions in real water samples. Perchlorate sensitive sensing responses were obtained based on measuring the current changes with respect to the assisted transfer reaction of perchlorate ions by a perchlorate selective ligand namely, bis(dibenzoylmethanato)Ni(II) (Ni(DBM)2) across the polarized microhole array interface. Cyclic voltammetry was used to characterize the assisted transfer reaction of perchlorate ions by the $Ni(DBM)_2$ ligand when using the portable sensing device. The current response for the transfer of perchlorate anions by $Ni(DBM)_2$ across the micro-water/gel interface linearly increased as a function of the perchlorate ion concentration. The technique of differential pulse stripping voltammetry was also utilized to improve the sensitivity of the perchlorate anion detection down to 10 ppb. This was acquired by preconcentrating perchlorate anions in the gel layer by means of holding the ion transfer potential at 0 mV (vs. Ag/AgCl) for 30 s followed by stripping the complexed perchlorate ion with the ligand. The effect of various potential interfering anions on the perchlorate sensor was also investigated and showed an excellent selectivity over $Br^-$, $NO_2{^-}$, $NO_3{^-}$, $CO{_3}^{2^-}$, $CH_3COO^-$ and $SO{_4}^{2^-}$ ions. As a final demonstration, some regional water samples from the Sincheon river in Daegu city were analyzed and the data was verified with that of ion chromatography (IC) analysis from one of the Korean-certified water quality evaluation centers.

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.24-30
• /
• 2004

Analysis model for the two-phase catalytic reactor is presented. With the progress in development of micro thermofluidic devices, needs fur understanding of the phenomena in two phase reaction in cm scale has been arisen. To investigate thermal and reactive performance of down scaled two phase reactor simple analysis model that is a kind of lumped flow model is proposed. Analysis model presented is based on the experiment on mm scale model reactor. Target experiment is catalytic decomposition of 70wt％ hydrogen peroxide with existence of perovskite L $a_{0.8}$S $r_{0.2}$Co $O_3$ catalyst. It is composed of balance equations of mass and energy. Each phase is considered to be a species fur the simplicity. Axial diffusion and transversal distribution of properties are neglected. Two phase catalytic reaction is modeled as successive gasification of liquid lump around catalyst and reaction in gas phase. Heat transfer is modeled by model function ofNu number. Modeled Nu is expressed as Nu=N $u_{0}$ (1＋ $a_1$( $a_2$ $T^{-}$ $a_3$)exp( $a_4$ $T^{-1}$)exp( $a_{5}$ z). Transfer coefficients are determined by the comparison of experimental results. With the model, heat transfer characteristics are investigated. Also by the mass transfer coefficient, characteristics in mass transfer is investigated. With the result basic understanding on design and analysis of mm scale two-phase reactive device is obtained. Also it can be further applied to micro scale reactive device fabricated by micromachining.ing..

• 한국인터넷방송통신학회논문지
• /
• 제13권2호
• /
• pp.15-23
• /
• 2013

본 논문에서는 N-스크린 환경에서 세션 이관 및 분리을 통해 사용자의 이종의 단말 간 유동적으로 컨테츠를 이동하고, 서비스 단말을 변경 할 수 세션 제어 구조와 방안을 제안한다. N-스크린 서비스에서는 사용자가 스크린 해상도, CPU 능력, 액세스망 인터페이스 등이 다른 복수의 단말을 사용할 수 있다. 또한, 사용자가 서비스 사용 중 단말을 변경하거나, 한 명의 사용자가 다중 스트림(One User Multi Stream)을 사용할 수 있어야 하므로, 이종의 다중 단말 간 컨텐츠를 이동시키거나 서비스 단말을 변경할 수 있는 등의 N-스크린 서비스를 위한 구조와 서비스 방안이 필요하다. 본 논문에서는, N-스크린 환경에서 세션 분리 및 이관 등을 제어할 수 있는 세션 관리 및 제어를 위한 노드들을 제안하고, 이 노드들과 사용자들 간의 인터랙션을 통해 이종의 다중 단말간 유동적인 컨텐츠 이동과 서비스 단말 변경이 가능한 N-스크린 환경에 적합한 세션 제어 구조를 제안한다. 제안된 방안은 단말 사양에 맞추어 세션 이관의 지연을 최소화하고 또한 서버의 부하를 최소화하도록 한다. 시뮬레이션의 결과를 통해, 제안하는 구조를 와 방안에 대한 효율성 및 성능을 분석하였다.

• Journal of Acupuncture Research
• /
• 제30권4호
• /
• pp.125-138
• /
• 2013

Objectives : This study aimed to investigate temperature characteristics by heat transfer type of therapeutic modalities. Methods : We selected heating and cooling modalities that are frequently used in clinical by heat transfer type: conduction, convection, radiation, and conversion. We used ham as tissue model, and applied the modalities for 30 minutes. We measured real-time changed temperature($^{\circ}C$) of the surface, 2, 4, 6, 8, 10, 12, and 14 mm depth. Results : 1. In conduction-using hot pack, ice pack, and CryoStamp heating-cooling combination therapy unit($40^{\circ}C/{\sim}15^{\circ}C$), the surface temperature sharply rose close to equilibrium in first 5 minutes. 2. In convection-using smokeless moxa, temperature slowly rose to the maximum at 25-minute elapsed time. But in another convection-using CRAiS cryotherapy device, result was similar to that of conduction. 3. In radiation-using infrared lamp, result was similar to that of conduction, but not reached equilibrium during applying time. 4. In conversion-using ultrasound device, temperature was the highest at 6 mm depth, and not reached equilibrium during applying time. Conclusions : We could comprehend temperature characteristics and proper use of modalities by heat transfer type. It would be necessary to consider in vivo physical conditions in further studies.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 춘계 총회 및 학술발표회
• /
• pp.133-136
• /
• 2003

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1983년도 추계학술발표회논문집
• /
• pp.81-84
• /
• 1983

A Discrete Hilbert transformer is studied and using the Charge Transfer Device. Error problem is discussed and compared with passive, active and digital H.T circuits.

• 정보과학회 논문지
• /
• 제42권6호
• /
• pp.707-712
• /
• 2015

모바일 클라우드 컴퓨팅은 모바일 기기의 자원제약적인 한계를 극복하기 위해 클라우드 서비스를 활용하는 기술로 모바일 기기에서 실행해야 할 일부 작업을 클라우드에서 수행하게 하는 컴퓨테이션 오프로딩 기법이 사용된다. 오프로딩에 필요한 통신 비용보다 모바일 기기 내에서의 연산 비용이 클 경우 모바일 기기는 클라우드에게 작업 수행을 위탁한다. 모바일 기기에서 수행할 작업과 클라우드에서 수행할 작업을 분할하기 위한 기존의 비용 분석 모델은 함수 호출에 필요한 데이터 전송과 응답 시간만을 오프로딩 비용으로 산정하였다. 본 논문에서는 컴퓨테이션 오프로딩 비용 산출 시 함수의 호출 및 응용 프로그램의 동기화 빈도를 고려한 작업 분할 기법을 제안하였고 실험을 통해 기존의 기법들에 비해 에너지 효율성을 높일 수 있음을 확인하였다.