• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.12
• /
• pp.1857-1863
• /
• 2012

The VDS(Vehicle Detection System) collects and transfers information about traffic situations in real time, therefore it makes the traffic management effective. Recently, the VDSs have provided good stability and accuracy in regard to system reliability and functions but they also have showed problems such as raising costs and consuming times when a new system is installed and/or the environmental requirements for the system are set up. The reason of the problems is that up to now the collection of the data and information about the traffic situations has been achieved by the 1:1 information exchange between the traffic control surveillance center and the each traffic field, between equipments and centers, and among data processing equipments and also centers. The communication systems used in the VDS are generally composed of 1 : 1 connection of the lines because the communication protocols are different in the most of the cases mentioned above. Consequently, this makes the number of communication lines become larger and causes the cost for the whole traffic information systems to increase. In this paper, a development of a controller to unify the communication protocols for the VDS is peformed to solve the problems which were mentioned above. Specially, the controller developed in this paper was applied to a radar vehicle detector and tested to show its usefulness. In addition to that, the developed controller was also designed to include functions to transfer the information about weather conditions on the roads.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.163-169
• /
• 2013

PURPOSES: The urban traffic problems can be defined as general problems for smooth traffic flow including maintenance of mass transportation system according to suddenly increased population, traffic regulations for vehicles and pollution problem. As a method for solving traffic jams, one of the traffic problems of late, interest in Intelligent Traffic System(ITS) is increasing sharply, which is a system managing traffic demand by providing passers with information on traffic state of path and road conditions before they pass the road through ATIS, a field of ITS. METHODS: Variable message signs(VMS) is used on the roads as a method for providing information to promote smooth traffic flow and safety and prevent traffic accidents in advance by providing drivers with various information while driving. RESULTS: Recently, as ITS industry has been vitalized and technical factors of VMS have developed, various kinds of information is provided but the effect of VMS has not been maximized due to its limited type. CONCLUSIONS: Therefore, this study intends to provide methods for effective information transfer by analyzing driver's visual behavior characteristics for VMS and presenting a basis for maximizing VMS effect after considering read by expression type.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1051-1058
• /
• 2022

Information sharing is the main purpose of realizing interoperability between the application domains of Geographic Information System (GIS) and Building Information Modeling (BIM). This paper presents and describes the workflow of BIM-GIS interoperability for highway traffic information sharing. An innovative and automatic Dynamo process was presented to transfer the shapes and attributes of the shapefile from GIS to BIM. On the basis of the transformed BIM model, the detailed traffic data was added and expressed in the form of families and sheets to expand traffic information. Then, the shapes of the model were swept as solid geometries in the BIM environment applying Dynamo. The expanded BIM model was transferred back to the GIS system using the Industry Foundation Classes (IFC) scheme. The mutual communication between BIM and GIS was achieved based on Dynamo and IFC. This paper provides a convenient and feasible way to realize BIM-GIS interoperability for highway traffic information sharing according to the characteristics of highways in terms of graphic expression and model creation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.539-547
• /
• 2012

Increasing the mode transfer volume between public transportation modes has known to be necessary for efficiency improvement of public transportation system operation and it is also found to be important to have relevant transfer point selection with reflection of current travel pattern. This study is in regards to providing a selection guideline for the location of transfer point between public transport modes. This case study has been carried out for Daegu Metropolitan City especially for public transportation users behaviour by analysis of daily usage of transportation card to identify the transfer travel pattern. A cluster analysis was applied to categorize the pattern of transfer stop which induces many users and a discriminant analysis also utilized for grouping the stops by number of transfer trip. This research produces the estimation result of transfer volume for urban railway system no.3 in Daegu City which is currently under construction. In addition, the locations of transfer center has also been proposed.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.572-574
• /
• 1998

In this paper, we are proposed design of ATM networks to transfer for electric power system informations, proposed transport networks is partitioned management part and functional part, management part is partitioned edge network, core network, local network, authority network, functional part is partitioned core network, access network, edge area. It is based on laying and partitioning by ITU-T G.805, we also proposed ATM network requirements for Carrier Relay traffic acceptability in electric power system information.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.19-33
• /
• 2012

Ministry of Land, Transport and Maritime Affairs prepared the method to update traffic connection system by amending "National Transport System Efficiency Act(hereinafter Act)". The key is a development of Intermodal Transfer Center. The law and guideline related with Intermodal Transfer Center requires the installation and operation of transfer information guide facility to improve user's convenience. However, there are no sufficient studies that can be used as references for the method to construct transfer support information system related with user's preference. The study performed the research about user's service satisfaction in relation with transfer support information service, which was embodied in model operation process, on the basis of transfer support information system of Intermodal Transfer Center applied to Gimpo Airport. The analysis result about service preference, importance of each supplied information, service satisfaction and consideration for service embodiment can be used as a guideline to embody the user information service of Intermodal Transfer Center. In addition, through CVM, the study estimated and proposed the service valuation of smart intermodal transfer service that provides customized information to cope with user's situation and traffic means operation status among transfer support information service. It is determined that the study will measure the benefit of Intermodal Transfer Center user by using monetary value when smart intermodal transfer service is supplied and provide the ground to expand high-tech transfer information service with high usefulness and convenience.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2097-2100
• /
• 2003

Many studies have been done on secure operating system using secure kernel that has various access control policies for system security. Secure kernel can protect user or system data from unauthorized and/or illegal accesses by applying various access control policies like DAC(Discretionary Access Control), MAC(Mandatory Access Control), RBAC(Role Based Access Control), and so on. But, even if secure operating system is running under various access control policies, network traffic among these secure operating systems can be captured and exposed easily by network monitoring tools like packet sniffer if there is no protection policy for network traffic among secure operating systems. For this reason, protection for data within network traffic is as important as protection for data within local system. In this paper, we propose a secure operating system trusted channel, SOSTC, as a prototype of a simple secure network protocol that can protect network traffic among secure operating systems and can transfer security information of the subject. It is significant that SOSTC can be used to extend a security range of secure operating system to the network environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.917-921
• /
• 2004

Principle of mailing list was distributed messages to all subscribers in one time. But mailing list operation has constructed a network traffic problem. Because mailing list manager distributed mails without concentrate on subscriber network. If our network has many of subscribers, there will be redundant data in traffic channel. Submailing list has purpose to reduce problems. Analyses of mailing list characteristic in electronic mail were a feature of submailing list system, which manage by human hand (Network Administrator). That will cause trouble for network traffic if Network Administrator could not seek for mailing list characteristic from e-mails in due time. This article will present ideas and recognize methodology for automatic working in submailing list system. Recognize step begin with capture process, which use to trap e-mail information from transfer channel. Next process is preparing raw data into recognition format. Then the third one is recognize part and find out confidential factor. The last process is make decision and determine which electronic mail has properties of mailing list characteristic. Afterward deliver result to submailing list for carry on.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2936-2938
• /
• 2005

The deployment of multicast communication services in the internet is expected to lead a stable packet transfer even in heavy traffic as in network system environment. The core based tree scheme among many multicast protocols is the most popular and suggested recently. However, CBT exhibit two major deficiencies such as traffic concentration or poor core placement problem. so, measuring the bottleneck link bandwidth along a path is important for understanding th performance of multicast. We propose not only a definition of CBT's core link state that Steady-State, Normal-State and Bottleneck State according to the estimation link speed rate, but also the changeover of multicast routing scheme for traffic overload. In addition, we introduce anycast routing tree, a efficient architecture for construst shard multicast trees.

• Journal of Information Technology and Architecture
• /
• v.10 no.2
• /
• pp.159-167
• /
• 2013

Web Services offer many benefits over other types of middleware in distributed computing. However, usage of Web Services results in large network bandwidth since Web Services use XML-based protocol which is heavier than binary protocols. Even though there have been many researches to minimize the network traffic and bandwidth usages of Web Services messages, none of them are solving problem clearly yet. In this paper, we propose a transparent proxy with cache to avoid transfer of repeated SOAP data, sent by Web Service to an application. To maintain the cache consistency, we introduce publish/subscribe paradigm using WS-Eventing between the proxy and Web Service. The implemented system based on our proposed architecture will not compromise the standards of Web Service. The evaluation of our system shows that caching SOAP messages not only reduces the network traffic but also decreases the request delays.