• Journal of Urban Science
• /
• v.6 no.2
• /
• pp.29-34
• /
• 2017

Although the supply of public parking lots in major cities is steadily increasing, there is still a shortage of parking spaces that take into account the characteristics of actual available parking spaces. These parking problems are caused by conflicts between users, illegal occupation and privatization of roads, interference with traffic roads, and business stagnation in commercial areas and illegal parking problems. In addition, despite various parking demand management policies and continuous supply of public parking facilities, the solution to the parking problem is uneasy due to increased construction costs and changes in social conditions. In order to solve this problem, it was judged that it would be necessary to utilize the existing public parking lots efficiently. Therefore, we collect the variables expected to affect the turnover, and use multiple regression models. The results are summarized as follows. Firstly, public parking lots can be classified into four types using utilization rate and turnover rate. Secondly, influencing factors are found including index of public transportation usage convenience, index of illegal parking, and land use characteristics in central commercial district. Thirdly, it was shown that there was little impact by the size of public parking lots, separation distance to subway distance, separation distance to bus stops, transfer zone, residential zone, and second-rated lots by parking costs. Finally, it is found that public parking lots can be improved by proving accessibility of public transit, enforcement of illegal parking, active approaches supporting public parking lots. It is also recommended that public parking cost rating system based mainly on land use characteristics should be remedied and rearranged.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.68-77
• /
• 2007

In this paper, we address TPS (Triple Play Service) based on E-PON and also develop QoS control function for both directions, which is disadvantage of E-PON. E-PON technology has the configuration suitable for TPS, but relatively the large delay characteristics in upstream, so if QoS control function must be supported to transfer the real time traffic for both directions, E-PON technology can support TPS efficiently. Therefore, in this paper, we address the diverse requirements of quality for TPS, and then develop TPS platform to verify the quality characteristics according to QoS characteristics of each element in real environment based on this. This result will be used to improve the quality of TPS that become conventional in near future. ISP will use this result as the basis in establishing quality reference and as the guidance in developing new system.

• Fire Science and Engineering
• /
• v.30 no.6
• /
• pp.23-30
• /
• 2016

This study analyzed the characteristics of chemical accidents, including the accidents occurring each year according to status, type of accident, accident cause for chemical substance transporting accidents. The major aim of this study was to provide information on the chemical accidents that occurred involving chemical substance transporting accidents from 2013 to July - 2016. The total incidence of chemical transporting accidents was 77 cases; 74 cases occurred by the spill & leakage type. The main cause of the accidents analyzed was traffic accidents (41 cases). Forty-six accidents were related to hazardous chemical substances. Among the 46 hazardous chemical substances involved in transporting chemical accidents, 46% of the accident substances were hydrogen chloride. For the prevention and response to accidents occurring during the transportation of chemicals, it is necessary to complement the precautions for chemical accidents caused by transportation accidents and chemical spills and leaks of chemicals. In addition, when the chemical transport of an accident occurs, it is necessary to apply a chemical transport safety system for chemical transfer.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.10
• /
• pp.73-81
• /
• 2011

The WBAN(Wireless Body Area Network) technology is a short distance wireless network which provides each device's interactive communication by connecting devices inside and outside of body located within 3 meters. Standardization on the physical layer, data link layer, network layer and application layer is in progress by IEEE 802.15.6 TG BAN. The The WBAN servides consists of both medical and non-medical applications. The medical application service uses the sensor that transfer the periodic traffic and have different data rates. It uses GTS method to guarantee QoS. In this paper, a new method is proposed, which are suitable design for MAC Protocol. Firstly, MAC frame structure and a primitive based on the WBAN are proposed. Secondly, we proposed the GTS algorithm improved the channel utilization based on the WFQ(Weighted Fair Queuing). The proposed scheduling method is improved channel utilization compared with i-Game(Round Robin scheduling method).

• The Journal of the Korea Contents Association
• /
• v.16 no.4
• /
• pp.594-603
• /
• 2016

This study analyzed that introduction function and program how influence about quality of life local resident and development of region according to real development. Also, it suggested policy implications of area activation plan through complex development of railway station area. In research method, the factor and structure affecting area activation in complex development of railway station area analyzed positively using the PLS structural equation focused on citizen near station area. As a result of study, in regional economic vitalization, the factors of software(marketing support, transfer system support, plan and design support, complex development support, law institution improvement, etc) and the factors of hardware(traffic function, information exchange function, commercial business function, housing features, amenity function, etc) are represented to influence significantly and then, in quality of life of local resident, the factor of hardware analyzed to influence significantly, but the factor of software and network did not. In comparison, the factor of network is represented that it did not contributed in regional economic vitalization and quality of life of local resident. So, political supplementations are needed.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1211-1216
• /
• 2000

Asynchronous transfer mode (ATM) can be efficiently used to transport packet data services. The switching system will support voice and packet data services simultaneously from end to end applications. To guarantee quality of service (QoS) of the offered services, source rateot send packet data is needed to control the network overload condition. Most existing control algorithms are shown to provide the threshold-based feedback control technique. However, real-time voice calls can be dynamically connected and released during data services in the network. If the feedback control information delays, quality of the serviced voice can be degraded due to a time delay between source and destination in the high speed link. An adaptive algorithm based on the optimal least mean square error technique is presented for the predictive feedback control technique. The algorithm attempts to predict a future buffer size from weight (slope) adaptation of unknown functions, which are used fro feedback control. Simulation results are presented, which show the effectiveness of the algorithm.

• Archives of Plastic Surgery
• /
• v.47 no.3
• /
• pp.223-227
• /
• 2020

Background After the laws regulating emergency medicine were amended in 2012, regional trauma centers were established in South Korea. Plastic surgeons specialize in the simultaneous surgical care of patients with facial trauma, burns, and complicated wounds. The objective of this study was to evaluate the role of the plastic surgery department in treating severe trauma patients. Methods From January 2012 to December 2018, we enrolled 366 severe trauma patients with an Injury Severity Score (ISS) over 15 who received treatment by specialists in the plastic surgery department. Of these patients, 298 (81.4%) were male, and their mean age was 51.35 years (range, 6-91 years). The average ISS was 22.01 points (range, 16-75 points). Results The most common diagnosis was facial trauma (95.1%), and facial bone fracture (65.9%) was most common injury within this subgroup. Patients were referred to 1.8 departments on average, with the neurosurgery department accounting for a high proportion of collaborations (37.0%). The most common cause of trauma was traffic accidents (62.3%), and the average length of stay in the general ward and intensive care unit was 36.90 and 8.01 days, respectively. Most patients were discharged home (62.0%) without additional transfer or readmission. Conclusions Through this study, we scoped out the role of the specialty of plastic surgery in the multidisciplinary team at regional trauma centers. These results may have implications for trauma system planning.

• Journal of Internet Computing and Services
• /
• v.3 no.3
• /
• pp.67-74
• /
• 2002

Asynchronous transfer mode (ATM) can be efficiently used to transport packet data services. The switching system will support voice and packet data services simultaneously from end to end applications. To guarantee quality of service (QoS) of the offered services, source rate to send packet data is needed to control the network overload condition. Most existing control algorithms are shown to provide the threshold-based feedback control technique. However, real-time voice calls can be dynamically connected and released during data services in the network. If the feedback control information delays, quality of the serviced voice can be degraded due to a time delay between source and destination in the high speed link, An adaptive algorithm based on the optimal least mean square error technique is presented for the predictive feedback control technique. The algorithm attempts to predict a future buffer size from weight (slope) adaptation of unknown functions, which are used for feedback control. Simulation results are presented, which show the effectiveness of the algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.288-300
• /
• 2002

In this paper, a novel method of equalization of RF transceivers is suggested for MIMO(Multiple Input Multiple Output) antenna actively studied for high speed data transmission in the recent IMT-2000 system. The core of suggestion is in equalizing the transfer characteristics of multiple transceivers using feedback and memory during the predefined calibration time. This makes it possible to weight the signals in the intermediate frequency, which is easier in the application of recently developed DoA(Direction of Arrival) algorithms. In addition, the time varying optimum cell formation according to traffic is feasible by antenna beam-forming based on the DoA information. The suggested method of equalizing multiple transceivers are successfully verified using envelope simulation. two outputs. This paper is concerned with the diagnosis of multiple crosstalk-faults in OSM. As the network size becomes larger in these days, the convent.
nal diagnosis methods based on tests and simulation be.
me inefficient, or even more impractical. We propose a simple and easily implementable alg？ithm for detection and isolation of the multiple crosstalk-faults in OSM. Specifically, we develop an algorithm for isolation of the source fault in switc.
ng elements whenever the multiple crosstalk-faults are.
etected in OSM. The proposed algorithm is illustrated by an example of 16$\times$16 OSM.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.149-156
• /
• 2015

It is necessary to determine real path for urban railway users in order to allocate revenues between urban railway organizations. Out of several algorithms used to determine optimal routes, the k-path algorithm based on link-label has been utilized. However, this k-path algorithm has certain flaws. For example, optimal route can change depending on the travel and walking time, transfer penalty, and so on. Also, this algorithm cannot take into account the characteristics of users, who prefer express train to normal trains. In this paper, an algorithm is proposed to determine one single optimal route based on the traffic card data. This method also can search for an optimal path in conjunction with the railway timetable.