• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.04a
• /
• pp.357-364
• /
• 2004

Recently, many high-rise apartment buildings using the box system composed of only reinforced connote walls and slabs, have been constructed In residential buildings such as apartments, vibrations occur from various sources and these vibrations transfer to neighboring residential units through walls and slabs. It is necessary to use a refined finite element model for an accurate vibration analysis of shear wall building structures. But it would take significant amount of computational time and memory if the entire building structure were subdivided into a finer mesh. Therefore an efficient analytical method, which has only translational DOFs perpendicular to walls or slabs by the matrix condensation technique, is proposed in this study to obtain accurate results in significantly reduced computational time.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.3 no.2
• /
• pp.131-141
• /
• 1991

A method of optimum design of an axial rotary sensible heat exchanger for the heat recovery of exhaust gas from the air conditioning space was developed in consideration of economics of investment cost and profit according to the installation of heat exchangers. Leakage rate of exhaust gas was calculated and the correlation for the pressure drop due to leakage of exhaust gas was proposed. Heat transfer between the matrix and exhaust and intake gas was analysed to calculate the effectiveness of heat exchanger, which was used for the optimum design of rotary heat exchanger. The results show that optimum rotational speed increases as the length of rotor increases and there exists optimum NTU which maximizes the gain of total cost according to the installation of rotary heat exchanger.

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2003.10a
• /
• pp.145-146
• /
• 2003

Overproduction of transforming growth factor (TGF)-$\beta$l has been implicated in the pathogenesis of fibrotic diseases. TGF-$\beta$l plays a crucial role in the accumulation of extracellular matrix (ECM) in human and experimental glomerular diseases. However, it remains unclear whether inhibition of TGF- $\beta$l overproduction would suppress TGF- $\beta$l induced ECM accumulation. To inhibit the overproduction of TGF- $\beta$l in experimental glomerulonephritis induced by anti-Thy 1.1 antibody, we introduced antisense oligodeoxynucleotides (ODN) fur TGF- $\beta$l into the nephritic kidney by the HVJ-liposome-mediated gene transfer method. (omitted)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.41-46
• /
• 1996

The engine intake system noise has been recognized as a problem for many years. Acoustic design of intake system has traditionally been a trial and error process. This has resulted in the development of computer simulation program for a acoustic analysis and acoustic modeling. In this study, we developed the program based on the transfer matrix method which analyze and predict the performance of a intake noise. The program was verified by experiments on a real intake system. By using of the simulation program, we analyzed acoustic characteristics and, made proposals of improvement to reduce the intake noise and was verified by the SYSNOISE software.

• Journal of KSNVE
• /
• v.10 no.3
• /
• pp.401-409
• /
• 2000

Vibration of a BLDC motor is a coupled phenomenon between mechanical characteristics and magnetic origins through the motor air-gap. When a relative misalignment of rotor in the air-gap center exists on the assemblage it is considered to influence the motor system characteristics, depending on the degree of misalignment. The rotor-motor system used in a washing machine is modeled using FE-TM and a magnetic force of BLDC motor with radial rotor eccentricity is analyzed. And the transient whirl responses of a rotor system with relative misalignment in the motor air-gap are investigated considering mechanical origins and magnetic effects. Results show that rotor misalignment in the air-gap affect the vibration of the rotor-motor system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.715-721
• /
• 2008

공동주택에서의 음환경 성능은 실내환경의 질과 연관시켜 설계단계부터 충분한 검토가 필요한 성능항목이다. '국토해양부'는 '공통주택 성능등급 표시제도'에서 Air Duct를 통해 상하층간 전파되는 소음을 제어하기 위한 대책을 요구하고 있다. 이에 화장실에 적합한 구조 및 재질로 소음 저감기를 개발하고, 소음기 성능평가 장치를 구성하여 이론과 비교평가하고, 실제 현장에 설치 시 적용효과를 분석하였다.

• Tribology and Lubricants
• /
• v.9 no.2
• /
• pp.56-62
• /
• 1993

Al-Pb-Cu and Al-Si-Pb-Cu bearing alloys were produced by forced-stirring method and water-cooled copper mold casting to investigate the effect of the precipitation hardening on the wear properties. Sliding of produced alloy pin against a steel disc were performed under various applied loads. Lowering the wear rate and material transfer phenomena were explained by the strengthening of $\theta'$ precipitates on AI matrix. The transmission electron microscope observation reveals the role of the precipitates in the alloys with Cu. The movement of dislocations was hindered by precipitates which resulted in the reduction of plastic deformation at the worn surfaces.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.1
• /
• pp.1-4
• /
• 1996

This paper presents a state feedback $H^{\infty}$ controller design method for linear systems with delayed states and inputs. We derive a sufficient condition that the closed-loop system is asymptotically stable for all time-delays and that the $H^{\infty}$-norm of the closed-loop transfer function is less than or equal to some prescribed level $\gamma$. And we propose a sufficient condition for the existence of a state feedback $H^{\infty}$ controller using a form of linear matrix inequality(LMI). Furthermore, we show that the state feedback $H^{\infty}$ controllers can be obtained from solutions satisfying LMI.

• 유체기계공업학회:학술대회논문집
• /
• 1998.12a
• /
• pp.159-165
• /
• 1998

Bearing design of turbo type geared centrifugal air compressor for low vibration level has been studied. The Transfer Matrix Method was used in this paper to analyze the air-compressor consisting of impellers, multi-stage geared rotors, and oil-film hearings. We have to consider this air-compressor as multi-geared rotating system, because characteristics of rotor-bearing system are different from conventional characteristics of non-rotating system. From the view point of Rotordynamics, the stiffness and damping coefficient of oil-film bearing in case of compressor system are more sensitive than other design parameters such as shaft length, shaft diameter and the weight of impellers, etc. Therefore, the stiffness and damping coefficients on each bearing were considered as design parameters. As the result of this study, turbo type air compressor with low vibration level can be achieved.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.166-171
• /
• 2002

The transmission loss coefficient is very important acoustic property in parallel with absorption and acoustic impedance categorizing the acoustical materials, which can control the acoustical problems. At the same time, the transmission loss coefficient is a key parameter to choose the optimum material for the analysis of acoustical characteristics of material using SEA(Statistical Energy Analysis). In this paper, the transmission loss coefficient measurement system using 4-microphone impedance tube is proposed, based on the idea calculating the full transfer matrix of the acoustical sample to test. The theoretical background and measurement system are introduced, and finally the measurement results are verified.