• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.104-104
• /
• 1999

The local heat transfer coefficient is experimentally investigated for the reflux condensation in a countercurrent flow between the steam-air mixture and the condensate. A single vertical tube has a geometry which is a length of 2.4m, inner diameter of 16.56mm and outer diameter of 19.05mm and is made of stainless steel. Air is used as a noncondensible gas. The secondary side is installed in the form of coolant block around vertical tube and the heat by primary condensation is transferred to the coolant water. The local temperatures are measured at 15 locations in the vertical direction and each location has 3 measurement points in the radial direction, which are installed at the tube center, at the outer wall and at the coolant side. In three different pressures, the 27 sets of data are obtained in the range of inlet steam flow rate 1.348 -3.282kg/hr, of inlet air mass fraction 11.8 -55.0%. The local heat transfer coefficient increases as the increase of inlet steam flow rate and decreases as the decrease of inlet air mass fraction. As an increase of the system pressure, the active condensing region is contracted and the heat transfer capability in this region is magnified. The empirical correlation is developed represented with the 165 sets of local heat transfer data. As a result, the Jacob number and film Reynolds number are dominant parameters to govern the local heat transfer coefficient. The rms error is 17. 7% between the results by the experiment and by the correlation.

• Journal of Astronomy and Space Sciences
• /
• 제38권2호
• /
• pp.145-155
• /
• 2021

In this work, preliminary launch opportunities from NARO Space Center to the Sun-Earth Lagrange point are analyzed. Among five different Sun-Earth Lagrange points, L1 and L2 points are selected as suitable candidates for, respectively, solar and astrophysics missions. With high fidelity dynamics models, the L1 and L2 point targeting problem is formulated regarding the location of NARO Space Center and relevant Target Interface Point (TIP) for each different launch date is derived including launch injection energy per unit mass (C3), Right ascension of the injection orbit Apoapsis Vector (RAV) and Declination of the injection orbit Apoapsis Vector (DAV). Potential launch periods to achieve L1 and L2 transfer trajectory are also investigated regarding coasting characteristics from NARO Space Center. The magnitude of the Lagrange Orbit Insertion (LOI) burn, as well as the Orbit Maintenance (OM) maneuver to maintain more than one year of mission orbit around the Lagrange points, is also derived as an example. Even the current work has been made under many assumptions as there are no specific mission goals currently defined yet, so results from the current work could be a good starting point to extend diversities of future Korean deep-space missions.

• 한국ITS학회 논문지
• /
• 제8권2호
• /
• pp.149-157
• /
• 2009

교통연계 및 환승 센터를 이용하는 보행자에게 다양한 정보의 수집 및 가공을 통하여 실시간 맞춤형 정보를 제공하기 위해서 보행자의 위치를 실시간으로 추적할 수 있는 기술을 검토하였다. 하지만 현재까지 개발된 상용 기술은 장치의 설치 및 서비스 장소에 따라 위치 추적 오차가 일부 서비스에 적용하기에는 그 범위가 너무 크다. 다양한 상황이 발생할 수 있는 교통연계 및 환승 서비스에 적용하기에는 여러 가지 문제점이 있다. 실험을 실시한 광명역의 경우에도 각종 철골 구조물과 타 무선 장비가 혼재해 있는 악조건이었으며, 실질적으로 설치될 곳은 이보다 더 조건이 나쁠 수 있다. 그래서 우리는 정확도를 높일 수 있는 방법으로 교통 연계 및 환승 시스템에 적합한 위치보정알고리즘을 연구하였고, 위치보정알고리즘은 그리드 좌표 맵매칭, 모델링 좌표 및 칼만 필터링을 통해 설계되었으며, 환승 센터로 구성될 수 있는 유형의 다양화에 따른 최적화에 대비하여 향후 알고리즘의 인수를 결정하는데 도움을 주고자 시뮬레이터 형태의 알고리즘을 개발하였다.

• 대한토목학회논문집
• /
• 제31권4D호
• /
• pp.519-526
• /
• 2011

본 연구는 대구시의 교통카드자료를 이용하여, 환승정류장의 특성을 분석하였다. 대구시의 교통카드자료는 서울시와 달리 승차 정류장의 내용을 포함하고 있지 않고, 하차 단말기도 설치되어 있지 않기 때문에 환승정류장을 파악하기가 어렵다. 따라서 교통카드자료와 대구시 BMS자료와의 Matching으로 환승통행에 대한 데이터를 구축하여 본 연구를 진행하였다. 환승량 모형은 도심으로부터의 거리와 노선수는 양의 계수를 나타낸 반면, 대기시간은 음의 계수가 나타나는 것으로 분석되었다. 본 분석에서는 Oneway ANOVA 분석을 통하여, 최적의 군집수를 정하였다. 군집1은 군집중심이 2.99로써, 대구시 중심에 위치한 형태이며 군집2는 군집중심이 6.73으로 군집3은 군집중심이 12.78로써, 대구시와 경산시의 경계를 포함하고 있는 형태를 나타내며 있는 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4173-4180
• /
• 2023

The stability of engineered barriers in high-level radioactive waste disposal systems can be influenced by the decay heat generated by the waste. This study focuses on the thermal analysis of various canister designs to effectively lower the maximum temperature of the engineered barrier. A numerical model was developed and employed to investigate the heat dissipation potential of copper rings placed across the buffer. Various canister designs incorporating copper rings were presented, and numerical analysis was performed to identify the design with the most significant temperature reduction effect. The results confirmed that the temperature of the buffer material was effectively lowered with an increase in the number of copper rings penetrating the buffer. Parametric studies were also conducted to analyze the impact of technical gaps, copper thickness, and collar height on the temperature reduction. The numerical model revealed that the presence of gaps between the components of the engineered barrier significantly increased the buffer temperature. Furthermore, the reduction in buffer temperature varied depending on the location of the gap and collar. The methods proposed in this study for reducing the buffer temperature hold promise for contributing to cost reduction in radioactive waste disposal.

• 대한기계학회논문집B
• /
• 제37권12호
• /
• pp.1113-1120
• /
• 2013

본 연구에서는 $45^{\circ}$기울어진 저온의 사각형 밀폐계 내부에 존재하는 고온의 원형 실린더의 위치 변화에 따른 밀폐계 내부 자연대류 현상에 대한 수치해석을 수행하였다. Rayleigh 수는 $10^3$부터 $10^5$까지 변화하였으며 내부 실린더의 위치는 $-0.4{\leq}{\delta}{\leq}0.4$ 범위에서 0.1 간격으로 변화시켰다. 원형 실린더의 위치 변화에 따른 밀폐계 내부의 자연대류 현상은 실린더 표면과 밀폐계 표면의 Nu 수, 밀폐계 내부의 등온선 및 유선을 바탕으로 분석하였다. 본 연구에서 고려한 Rayleigh 수의 범위와 원형 실린더의 위치 범위에서는 밀폐계 내부의 열유동은 정상상태의 특성을 보였다. 그리고 내부 원형 실린더가 벽면에 가까워 질수록 실린더벽면과 밀폐계 벽면의 평균 Nu 수가 증가하였다.

• 농촌의학ㆍ지역보건
• /
• 제21권2호
• /
• pp.243-251
• /
• 1996

Authors surveyed the inhabitants in Ulnung Island to assess the patterns of medical utilization. One hundred eighty six population(65 male and 121 female) were surveyed with formed questionnaire from Aug. 16 to Aug. 19 in 1994. Results are as follows. 1. The prevalence rate of acute diseases was 19.3%. 2. The prevalence rate of chronic diseases was 35.0%. In classification of chronic disease, the disease of musculoscletal system was the highest(33.9%) and that of digestive system in next order. 3. The first-visit medical facility when disease developed was community health center mainly. The admission care was taken in 37.6%. The 80.0% among location of medical facility for admission care was out of island. The surgical operative care were taken in 19.9%. The 86.5% among location of medical facility for surgical operative care was out of island. 4. Among the contents of dissatisfaction for medical service within island, 'Insufficient equipment' was the highest(35.8%), and 'Insufficient traffic networks' in next order. The results of this study suggest that public health facilities and medical personnel be strengthened and emergency transfer system be secured in Ulnung Island.

• 대한조선학회논문집
• /
• 제52권4호
• /
• pp.323-329
• /
• 2015

For the design guide of a vessel operating in cold region, numerical analysis was carried out to evaluate the ice class louver which installed the heating cables by using ANSYS 13.0 CFX. The numerical analysis was performed by considering Unsteady Reynolds Averaged Navier Stokes (RANS) equation. This study based on the experimental results of ‘The Cryogenic Performance Evaluation for the Excellent De-icing Ice Class Louver’ in KRISO. For validation of the numerical analysis results, the cold chamber experimental data measured by the heat sensors in certain location of the ice class louver was used. The external environmental temperature which varies from 0℃ to –30℃ was considered in numerical analysis. Also the design guide for optimum de-icing presented through heating cable power capacity(33 W/m, 45 W/m, 66 W/m), location of the heating cable(front, center, behind on the blade) and relative velocity(1 m/s, 4 m/s, 7 m/s).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2744-2749
• /
• 2008

Numerical calculations are carried out for the natural convection induced by temperature difference between a cold outer square cylinder and a hot inner circular cylinder for Rayleigh number of $Ra=10^7$. This study investigates the effect of the inner cylinder location on the heat transfer and fluid flow. The location of inner circular cylinder ($\delta$) is changed vertically along the center-line of square enclosure. The natural convection bifurcates from unsteady to steady state according to $\delta$. Two critical positions of ${\delta}_{C,L}$ and ${\delta}_{C,U}$ as a lower bound and an upper bound are ${\delta}_{C,L}=0.05$ and ${\delta}_{C,U}=0.18$, respectively. Within the defined bounds, the thermal and flow fields are steady state. When the inner cylinder locates at ${\delta}{\geq}{\delta}_{C,U}$, the space between the upper surface of inner cylinder and the top surface of the enclosure forms a relatively shallow layer where the natural convection characterized as the pure Rayleigh-Benard convection forms alternately the upwelling and downwelling plums, as a result that a series of cells known as Benard cells is derived.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4030-4048
• /
• 2022

In this study, road transportation tests were conducted with surrogate fuel assemblies under normal conditions of transport to evaluate the vibration and shock load characteristics of spent nuclear fuel (SNF). The overall test data analysis was conducted based on the measured acceleration and strain data obtained from the speed bump, lane-change, deceleration, obstacle avoidance, and circular tests. Furthermore, representative shock response spectrums and power spectral densities of each test mode were acquired. Amplification or attenuation characteristics were investigated according to the load transfer path. The load attenuated significantly as it transferred from the trailer to the cask. By contrast, the load amplified as it transferred from the cask to the surrogate SNF assembly. The fuel loading location on the cask disk assembly did not exhibit a significant influence on the strain measured from the fuel rods. The principal strain was in the vertical direction, and relatively large strain values were obtained in spans with large spacing between spacer grids. The influence of the lateral location of fuel rods was also investigated. The fuel rods located at the side exhibited relatively large strain values than those located at the center. Based on the strain data obtained from the test results, a hypothetical road transportation scenario was established. A fatigue evaluation of the SNF rod was performed based on this scenario. The evaluation results indicate that no fatigue damage occurred on the fuel rods.