• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4B
• /
• pp.704-712
• /
• 2010

Recently, the lack of the frequency have been emerged due to the use of various wireless terminals. To find solutions for obtaining new frequency resources and for avoiding an interference, a cognitive radio technology have focused on as the new technology that can use the whitespace in TV broadcasting band. In this paper, the Cognitive Radio terminal system for whitespace in TV band is first introduced. The purpose of the CR terminal platform is to evaluate the feasibility of the unlicensed wireless service in the TV band. Then, we design and develop the software for Sensing MAC applied the cognitive radio terminal system. The developed Sensing MAC software based on IEEE 802.22 specification can be aware of using the whitespace in TV band that operates on cognitive radio terminal system. Finally, we have tested for evaluating the sensing MAC module.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1911-1932
• /
• 2013

Orthogonal frequency-division multiplexing (OFDM) has become a popular modulation scheme for wireless protocols because of its spectral efficiency and robustness against multipath interference. Although the components of various OFDM protocols are functionally similar, they remain distinct because of the characteristics of the environment. Recently, graphics processing units (GPUs) have been used to accelerate the signal processing of the physical layer (PHY) because of their great computational power, high development efficiency, and flexibility. In this paper, we describe the implementation of parameterized baseband modules using GPUs for two different OFDM protocols, namely, 802.11a and 802.16. First, we introduce various modules in the modulator/demodulator parts of the transmitter and receiver and analyze the computational complexity of each module. We then describe the integration of the GPU-based baseband modules of the two protocols using the parameterized method. GPU-based implementations are addressed to explain how to accelerate the baseband processing to archive real-time throughput. Finally, the performance results of each signal processing module are evaluated and analyzed. The experiments show that the GPU-based 802.11a and 802.16 PHY meet the real-time requirement and demonstrate good bit error ratio (BER) performance. The performance comparison indicates that our GPU-based implemented modules have better flexibility and throughput to the current ones.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.219-226
• /
• 2000

In this paper, we design and implement a IF(intermediate frequency) module for WLL(wireless local loop) CDMA(code division multiple access) basestation. The implemented IF transceiver is consists of transmitter, receiver and local oscillator. The considered signal bandwidth is 10 MHz and the local carrier frequency is 40 MHz. As test results, the If transmitter output power is -5dBm $\pm3dB$when the baseband input is -10dBm $\pm3dB$, and the IF receiver output power is -10dBm $\pm3dB$when the IF input is -5dBm $\pm3dB$. Also the AGC(automatic gain control) circuit has dynamic range of 9 dB from -7dBm to +2dBm with output power 2dBm. And the group delay characteristic is analyzed by comparing the phase delay from 1 MHz to 5 MHz and the phase distortion is very low. We can conclude that this IF system can be applied to high speed data rate communication system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2140-2145
• /
• 2008

We design and synthesize a 128-point FFT processor for multi-band OFDM, which can be applied to a UWB transceiver. The structure of a 128-point FFT processor is based on a Radix-2 FFT algorithm and a R2SDF pipeline architecture. The algorithm is efficiently modeled in VHDL and the result is simulated using Modelsim. Finally, they are synthesized on Xilinx Vertex-II FPGA, and an operational frequency of 18.7MHz has been obtained. It is expected that the proposed 128-point FFT processor can be applied to an entire FFT block as one of parallel processed FFTs. In order to obtain the enhanced maximum frequency of operation, we design the FFT module consisting of four 128-point FFT processors for parallel process. As a result, we achieve the performance requirement of computing the FFT module in multi-band OFDM symbol timing in 90nm ASIC process.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.29-34
• /
• 2021

For the purpose of Application to the small radar sensor, the MMIC Chips, which are the core component of the W-band, was designed in Korea according to the characteristics of the transceiver and manufactured by 60nm GaN and 0.1㎛ GaAs pHEMT process. The output power of PA is 28 dBm at center frequency of W-band and Noise figure is 6.7 dB of switch and LNA MMIC. Output power and Noise figure of MMIC chips developed in domestic was applied to the transmitter and receiver module through W-band waveguide low loss transition structure design and impedance matching to verify the performance after the fabrication are 26.1~27.7 dBm and 7.85~10.57 dB including thermal testing, and which are close to the analysis result. As a result, these are judged that the PA and Switch and LNA MMICs can be applied to the small radar sensor.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.500-506
• /
• 1999

We designed and fabricated a bidirectional optical transceiver module for low cost access network. An integrated chip forming a pin-PD on an 1.3 urn FP-LD was assembled by flip-chip bonding on a Si optical bench, a single mode fiber with an angled end facet was aligned passively with the integrated chip on V-groove of Si-optical bench. Gaussian beam theory was applied to evaluate the coupling coefficients as a function of some parameters such as alignment distance, angle of fiber end facet, vertical alignment error. The theory is also used to search the bottle-neck between transmittance and receiving coupling efficiency in the bi-directional optical system. Tn this paper, we confirmed that reduction of coupling efficiency by the vertical alignment error between laser beam and fiber core axis can be compensated by controlling the fiber facet angle. In the fabrication of sub-module, a'||'&'||' we made such that the fiber facet have a corn shape with an angled facet only core part, the reflection of transmitted laser beam from the fiber facet could be minimized below -35 dE in alignment distance of 2: 30 /J.m. In the same condition, transmitted output power of -12.1 dEm and responsivity of 0.2. AIW were obtained.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.70-74
• /
• 2015

In this paper, satellite communication based video surveillance system that consisted of ultra-small aperture terminals with small-size smart vision sensor is proposed. The events such as forest fire, smoke, intruder movement are detected automatically in field and false alarms are minimized by using intelligent and high-reliable video analysis algorithms. The smart vision sensor is necessary to achieve high-confidence, high hardware endurance, seamless communication and easy maintenance requirements. To satisfy these requirements, real-time digital signal processor, camera module and satellite transceiver are integrated as a smart vision sensor-based ultra-small aperture terminal. Also, high-performance video analysis and image coding algorithms are embedded. The video analysis functions and performances were verified and confirmed practicality through computer simulation and vision sensor prototype test.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1075-1081
• /
• 2011

In this paper, we proposed the DS-SS modem-based communication system for long distance wireless-transmission. The module we designed in this approach contained both convolution encoder and gold-code generator, which aimed at error correcting, T-DES encryption algorithm and spread-spectrum as well. It embodied PC-based GUI program in order to control the such command signal as data transceiver. This program also used to control the specific FPGA/MCU which is able to verify and interface to the modem. We demonstrated the communication system to verify its proper operation by using GUI program and designed hardware. A set of experiments are conducted and as a result, proposed communication system is well operated as the design specification.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.213-218
• /
• 2007

We propose a compact internal quard-band antenna with sufficient impedance bandwidths and gains for the GSM(Global Systems for Mobile), GPS(Global Positing System). DCS(Digital Codeless System), PCS (Personal Communication System) operation. The proposed antenna on a substrate. which is small enough to be installed in practical mobile phones, has heights of only 6mm from the substrate. In addition, the proposed antenna decreases the construction complex on the substrate. The GSM ($880MHz{\sim}960MHz$) GPS(1575MHz) DCS($1710MHz{\sim}1880MHz$). PCS($1750MHz{\sim}1870MHz$) bands. Details of the design and analysis of the proposed antenna are described and the experimental results of the constructed prototype are presented.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.4
• /
• pp.203-209
• /
• 2001

This paper develops a control method for some generic formation tasks of multiple mobile robots with inaccurate sensor information. Inaccurate sensor information means that all the robots have only local sensors that cannot accurately measure absolute distances and directions of objects. That is, all the sensors have limitation on the range, and uncertainty in the values. Therefore, more robust and reliable control logic is proposed and implemented. The logic is developed considering generic situations and increasing the number of robots participating in the formation. Petri nets are used for modeling and design of the control logic, which can visualize the control models and make it easy to check the states of each robot. Physically homogeneous mobile robots are designed and built to evaluate the developed logic. Each robot is equipped with eighteen infrared sensors and a UHF transceiver module. The experiment results are analyzed quantitatively by using the data of the relative distances and angles between the robots. And the trajectories of the robots during the formation are also evaluated. The developed control approach is demonstrated with experiments to be successful and efficient for the formation of autonomous mobile robots.