• Journal of the Society of Disaster Information
• /
• v.6 no.1
• /
• pp.46-59
• /
• 2010

In this study, the safety training of comparative analysis of the realities of Korea's safety training and international experience and practical training for the safety experience of a virtual reality simulator, the development of safe conduct as a controlled motion simulator system, image H / W and the control system works, sound effects H / W and the control system works, 4D special effects (smoke, heat, wind, vibration) and a control system integration, mission control system for the selection and evaluation of the proposal, and safety training on Game S / W of development as we have never experienced an earthquake action plan and evacuate to escape the power of experience and the experience of an earthquake (vibration + video), Also the collapse and a fire escape on the experience of following second disaster, the building collapsed during an escape experience in the field, in case of fire According to the initial fire suppression and fire extinguisher usage experience - experience of smoke and heat to escape in, Moreover, the Daegu subway fire in public places such as subway and evacuated to escape the experience, considering the suggested Simulator.

• The Journal of Korean Physical Therapy
• /
• v.32 no.6
• /
• pp.383-387
• /
• 2020

Purpose: The purpose of the present study was to investigate the effects of a simultaneous dual-task and horse-riding simulator (HRS) training regime on pulmonary function and flexibility. Methods: Sixteen subjects were recruited and randomly allocated to two groups: a dual-task (DT) (n=8) or a single-task (ST) (n=8) training group. Flexibility and pulmonary function were assessed before and after HRS training. Both groups underwent HRS training for 4 weeks, 3 times/week in 15-minute training sessions. The ST group underwent HRS training and the DT group underwent dual-task HRS training, which consisted of throwing and catching a ball and ring catching while HRS training. Results: Training significantly increased flexibility and FVC (forced vital capacity) and FEV1 (forced expiratory volume in 1 second) in both groups (p<0.05), but FEV1/FVC and PEF (peak expiratory flow) were not significantly different after training in both groups (p>0.05). After the training, flexibility and FVC in the DT group were significantly greater than in the ST group (p<0.05), but FEV1, FEV1/FVC, and PEF were not significantly different (p>0.05). Conclusion: Simultaneous dual-task and HRS motor training improved flexibility, FVC, and FEV1, and our comparative analysis suggests that dual-task HRS training improved flexibility and FVC more than single-task training.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.703-709
• /
• 2023

It is most desirable to train with a real crane in an environment similar to that of a port for crane operation training in charge of loading and unloading in a port, but it has time and space limitations and cost problems. In order to overcome these limitations, VR(Virtual Reality) based crane training programs and related devices are receiving a lot of attention. In this paper, we designed and implemented a VR-based harbor crane simulator operating on an HMD. The simulator developed in this paper consists of a crane simulator program that operates on the HMD, an IoT driving terminal that processes trainees' crane operation input, and a training server that stores trainees' training information. The simulator program provides VR-based crane training scenarios implemented with Unity3D, and the IoT driving terminal developed based on Arduino is composed of two controllers and transmits the user's driving operation to the HMD. In particular, the crane simulator in this paper uses a training server to create a database of environment setting values for each educator, progress and training time, and information on driving warning situations. Through the use of such a server, trainees can use the simulator in a more convenient environment and can expect improved educational effects by providing training information.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.52-59
• /
• 2014

Operator training simulator, within a training environment designed to understand the principles and behavior of the railway system with respect to operator's entries and predefined scenario, can provide a very strong benefit in facilitating operators' handling undesired operations. This simulator consists of computer system and applications, and the purpose of applications is to generate the power and voltage and analyze the AC substation and DC railway, respectively. This paper describes a novel approach to the new techniques for AC/DC hybrid simulation for the operator training simulator in the railway system. We first propose the structure the database of railway system. Then, topology processing and power flow using a linked-list method based on the proposed database, full or decoupled newton-rapshon methods are presented. Finally, the interface between the analysis for AC substation using a newton-rapshon method and the analysis for DC railway system using a time-interval power flow method is described. We have verified and tested the developed algorithm through the extensive testing for the proposed test system. To demonstrate the validity of the developed algorithm, comparative simulations between the proposed algorithm and PSS/E for the test system were conducted.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.2
• /
• pp.192-199
• /
• 2004

Navigation simulators have been used in many marine schools and manne training centers since the early 1960's. But these simulators were very expens~ve and were almost limited only in one engine system. In this paper, a catamaran with twin engine system. controlled by two remote control levers and its economic simulator based on a personal computer shall be introduced. One of the main features of catamaran is to control variously its progressing direction. In the static state, a catamaran can move into all the directions and in the dynamic state, ship can change immediately the heading and speed. Although a good navigator can skillfully operate one engine system, it is difficult to control smoothly the catamaran of twin engine system without any threat for the safety of passengers. Thus. in order to bring up the expert navigators. the development of a simulator which makes the training effective is necessary, Therefore, in this paper, a Fuzzy Inference Technique based Maneuvering Simulator for catamaran with twin engine system was developed. In general. in order to develop a catamaran simulator for effective training, first of all. its mathematical model must be acquired. According to the acquired system modeling. the dynamics of simulator is determined, But the proposed technique can omit a complex and tedious mathematical modeling procedures by using the fuzzy inference, which dependent upon only experiences of an expert and can design an efficient training program for unskillful navigators. This developed simulator was consisted of two fuzzy inference routines and two remote control levers, and was focused on effective training of navigators for the safe maneuvering to avoid a collision in a harbor.

• Journal of the Korea Society for Simulation
• /
• v.31 no.2
• /
• pp.21-32
• /
• 2022

The ROK Navy is seeking to secure an aircraft carrier(CVX) to take responsibility for the maritime security of the Republic of Korea. In order for the CVX to complete the mission given to it, the crew must be able to operate the CVX perfectly, and for this purpose, the operating skills of the CVX crew result from constant training. Therefore, this paper proposes an On-board Training System(OBTS) so that the best training can always be performed even on ship. CVX OBTS should be built in the form of a thorough simulator based on a Synthetic Training Environment(STE) so that it can be optimally applied to ship and provide the best training environment to the crew. In order to satisfy the various training requirements and implementation conditions of the CVX, this paper proposes a plan to consist of Embedded Training System(ETS), VR training system, AR maintenance system, MR training system, MR metaverse training system, and realistic simulator training system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.1 no.1
• /
• pp.63-82
• /
• 1995

In recent years, through the rapid development in personal computer technology, it has become possible to make a radar simulator based on the personal computer. The advantage of the personal Computer aidd radar simulator lies in its cost effectiveness, when comparing with that using the real radar. Although there have been studies carried out to develop radar simulator using PC and the products of thi kind is in the commercial market already, they are all using the mockup of the real radar, and therefore, the price of the simulator is still rather expensive. In this respect, this thesis aims to develop a ARPA radar simulator which is running on the sole PC, so that the students of the maritime educational institution may get ARPA radar training easily and cheaply. The simulator developed in this thesis using Visual Basic is found to run successfully on the 486PC, and it is expected that this new simulator system designed first time in Korea would be used as an easily accessible ARPA radar training equipment.

• International Journal of Railway
• /
• v.2 no.2
• /
• pp.50-59
• /
• 2009

Numerous train operating companies provide training by means of driving simulators. A detailed analysis in the course of the rail research project 2TRAIN has shown that the simulation technology, the purposes of training and the overall concept of simulator-based training are rather diverse (Schmitz & Maag, 2008). A joint factor however are weak assessment capabilities and the fact that the simulator training is often not embedded into the overall competence management. This fact hinders an optimal use of the simulators. Therefore, 2TRAIN aims at the development of enhanced training and assessment tools. Taking into account that several simulators are already in use, the focus lays on the extension of existing simulation technology instead of developing entirely new systems. This extension comprises (1) a common data simulation interface (CDSI), (2) a rule-based expert system (ExSys), (3) a virtual instructor (VI), and (4) an _assessment database (AssDB). The foundation of this technical development is an assessment concept (PERMA concept) that is based on performance markers. The first part of the paper presents this assessment concept and a process model for the two major steps of driver performance assessment, i.e. (1) the specification of exercise and assessment and (2) the assessment algorithm and execution of the assessment. The second part describes the rationale and the functionalities of the simulator add-on tools. Finally, recommendations for further technical improvement and appropriate usage are given. based on the results of a pilot study.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.1-9
• /
• 2010

This paper summarizes an education and training system for the auto-reclosing of power transmission system using a real time digital simulator. The system is developed to understand the principle of reclosing and the sequence of automatic reclosing schemes, and practice the effects of reclosing actions to power system in real-time simulator. This study is concentrated into the following two parts. One is the development of real time education and training system of automatic reclosing schemes. For this, we use the RTDS(real time digital simulator) and the actual digital protective relay. The mathematical relay model of RTDS and the actual distance relay which is equipped automatic reclosing function are also used. The other is the user friendly interface between trainee and trainer. The various interface displays are used for user handing and result display. The conditions of automatic reclosing which is a number of reclosing, reclosing dead time, reset time, and so on, can be changed by the user interface panel. A number of scenario cases are reserved for the education and training. Through the test, we verified that the proposed system can be effectively used to accomplish the education and training of automatic reclosing.

• Journal of Biomedical Engineering Research
• /
• v.41 no.4
• /
• pp.154-164
• /
• 2020

Various simulator systems for surgery training have been developed and recently become more widely utilized with technology advancement and change in medical education adopting actively simulation-based training. The authors have developed tissue-instrument interaction modeling and graphical simulation algorithms for an arthroscopic surgery training simulator system. In this paper, we propose algorithms for basic surgical techniques, such as cutting, shaving, drilling, grasping, suturing and knot tying for rotator cuff surgery. The proposed method constructs a virtual 3-dimensional model from actual patient data and implements a real-time deformation of the surgical object model through interaction between ten types of arthroscopic surgical tools and a surgical object model. The implementation is based on the Simulation Open Framework Architecture (SOFA, Inria Foundation, France) and custom algorithms were implemented as pulg-in codes. Qualitative review of the developed results by physicians showed both feasibility and limitations of the system for actual use in surgery training.