• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.10
• /
• pp.1054-1061
• /
• 2015

The International Maritime Organization (IMO) has been regulating emissions by making mandatory the compliance with institutions aimed at protecting air quality such as the Energy Efficiency Design Index (EEDI), Ship Energy Efficiency Management Plan (SEEMP) and Tier III. Under the circumstances, one of the response measures considered to be the most feasible is the replacement of existing marine fuel with Liquefied Natural Gas (LNG). The industry has been preemptively building infrastructure and developing and spreading engine technology to enable the use of LNG-fueled ships. The IMO, in turn, recently adopted the International Code of Safety for Ships Using Gases or Other Low-Flash-Point Fuels (IGF Code) as an institutional measure. Thus, it is required to comply with regulations on safety-related design and systems focused on response against potential risk for LNG-fueled ships, in which low-flash-point fuel is handled in the engine room. Especially, the Standards of Training, Certification and Watchkeeping (STCW) Convention was amended accordingly. It has adopted the qualification and training requirements for seafarers who are to provide service aboard ships subject to the IGF Code exemplified by LNG-fueled ships. The expansion in the use of LNG-fueled ships and relevant facilities in fact is expected to increase demand for talents. Thus, the time is ripe to develop methods to set up appropriate STCW training courses for seafarers who board ships subject to the IGF Code. In this study, the STCW Convention and existing STCW training courses applied to seafarers offering service aboard ships subject to the IGF Code are reviewed. The results were reflected to propose ways to design new STCW training courses needed for ships subject to the IGF Code and to identify and improve insufficiencies of the STCW Convention in relation to the IGF Code.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.5
• /
• pp.1404-1412
• /
• 2015

This study aimed at exploring, based on the current states and status of onboard training ship, plans to improve the boarding training management for fisheries high school. The results were as follows. The problems with the management of onboard training ship were summarized as the following four types. Firstly, The most training ships throughout the country became superannuated. Secondly, the safe equipments for training ships were necessary to compensate the defects to fall short of the international safety management standards. Thirdly, the problems could result from the dualized system between ownership and management, since training ships were owned by metropolitan and provincial education offices and operated by management centered schools. Fourthly, middle technicians such as professional fisheries manpower were not easily supplied with. The plans to improve the above problems were as in the following. Firstly, support and help of Ministry of Maritime Affairs and Fisheries were needed to launch new onboard training ships which substitute for the superannuated. Secondly, new onboard ships were required to be launched according to the updated international safety management standards. Thirdly, Korea Institute of Maritime and Fisheries Technology should hold onboard training. Fourthly, on-site onboard training expertise, systemic management, safety, etc. should be compensated through industry-university-institute collaboration.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.57-58
• /
• 2006

Pumps have been widely used for transporting fluid in most of the merchant ships. However, the present status of using pumps for marine vessels has not been studied. This paper is to classify and analyze pumps installed in many ships(LNGC, Oil Tanker, Bulk, Container, Training ship). Finally, Pumps installed in the training ships are compared with merchant ships about the present status of using pumps.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.3
• /
• pp.261-263
• /
• 2023

Recently, universities of fisheries and institutions related to fisheries are actively carrying out a project to build new fisheries training ships. These new fisheries training ships are significantly larger in size and longer in length than the previous ships. In addition, these new ships basically have space that can accommodate more than 100 crew and passenger. On the other hand, they are excluded from IMO maneuverability evaluation since the size of these ships are still less than 100 m in length (LBP). These results have had an impact on the study of maneuverability of fishing vessels including the fisheries training ships. Against these backgrounds, the authors conducted a study to estimate the maneuvering characteristics of fisheries training ship Baek-Kyung according to depth in order to prepare a maneuvering characteristic index that enables the large fisheries training ships to navigate more safely using a modified empirical formula. It was confirmed that the maneuvering characteristics of Baek-Kyung changed significantly as the values of the hydrodynamic force coefficients changed as the water depth gradually decreased from around 1.5 (approx. 8 m in depth) of the ratio of the water depth to the ship draft. The results of this study will not only help navigators understand the maneuvering characteristics of Baek-Kyung, but also serve as an indicator when navigating in shallow water. In addition, the accumulation of these results will serve as a basis for future study on maneuverability of fishing vessel types.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1591-1601
• /
• 2016

In recent years most of large-sized merchant ships have been equipped with a high-voltage system. The ships demanding a lot of electric power adopt the high voltage such as 3.3kV, 6.6kV, 11kV. Gradually as the high voltage system is increased in the ships, engineering officers are more opportunities to operate the high voltage system. So the high voltage training for engineering officers was established in the STCW 1978 as amended by the Manila Amendments in 2010. According to this convention when the engineering officers want to board the high voltage ships on and after January 1 in 2017, they must take the high voltage training. This paper, firstly, analyzes the content of high voltage training in STCW convention and IMO model course. In addition, it reviews the parts need to be considered in the content of the high voltage training. Finally this paper proposes the contents of training model divided into theory and practice.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.35-35
• /
• 2017

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.224-226
• /
• 2015

Outwardly, the people in the shipping industry are aware that multicultural working environments and conditions could have a strong influence on the operation of ships. With a lack of cultural awareness and foreign language skill of crew members on ships, there are lots of misunderstandings and miscommunications among (cross-cultural) crews. More and more maritime accidents are caused by human error in the world's oceans. Nevertheless the research on cultural diversity and human interaction on ships is still in its infancy. Due to the rapid change of the demographic make-up of crews, not only teaching and training technical skills for the crews, but also education in nontechnical skills such as cultural awareness, cultural sensitivity, intercultural competence is urgently needed. This study will deal with intercultural issues on ships. It aims to emphasize the necessity of intercultural training in MET.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.100-106
• /
• 2022

Ships are built according to the purpose and operated with individual goals. Operational goals are reflected in the design of the ships and become the main criterion for determining the required ship ability. In general, cargo ships and passenger ships are objectively evaluated in terms of the operation part of the ship and the capacity part of the cargo or passenger, centering on their transportation ability. In consideration of the required ship ability, the built ship can expect effects such as economic feasibility and eco-friendliness in addition to basic characteristics such as stability. Accordingly, the concept of ship ability is expected to be effectively used in the field of training-only ship management by each institution, which plays a pivotal role in training ship-officers. In this study, the basic direction was verified for the ship ability evaluation criteria of training-only ships through the analysis of the internal space of two training-only ships of the Korea Institute of Maritime and Fisheries Technology, which were recently built with a time lag. In the process of building training-only ship or general-purpose training ship, the possibility of using the ship ability standards in securing budget and designing was derived.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.7
• /
• pp.1051-1060
• /
• 2008

Now days, various types of ships are operated to transport both cargo and passengers all around the world. Most of the important auxiliary machinery installed in those ships is fluid machinery such as pumps, compressors, and fans. A large percentage of fluid machinery is pumps which are classified as turbo and positive displacement pumps. This paper analyzes only turbo pumps out of the two types. This thesis has two aims: (a) to analyze the present status of pumps installed in merchant and training ships and (b) to find the correlation among sea going pump kW, port pump kW, GE kW, ME MCR, number of pumps, ME kgf, pump kgf. Based on the ship's type, my paper seeks to find special characteristics as a result of analyzing head, flow rate, and kW. Moreover this paper analyzes and compares number of pumps, rpm of pumps, pump kW/ME MCR and pump kW/GE kW under the conditions of seagoing and berthing according to the ship's type. In conclusion, (1) For the exact comparison, information on the head, kW, flow rate, number of pumps by ship's type, the pump installation status of the Merchant Ships and Training Ships were tabulated and compared in this paper. (2) In order to qualify one ship as the delegate ship, several methods were used. The result of the examination indicates that the chosen ships could be justified as a suitable representation of ships of their own type. (3) The correlation of several values(total pump kW, port pump kW, GE kW, seagoing pump kW, pump weight, ME weight, ME MCR, number of pumps and ME kW) could be obtained.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.880-885
• /
• 2009

The ships have a lot of electric machinery needed to supply electricity from the moment of launching coming out of dry dock to docking at jetty. Thus, the ships always have to use alternator and electric machinery that has low efficiency under the low load. Many government service ships like the MMU training ship have been spending lots of time at jetty rather than sailing at sea. These ships are operated under the condition of low load due to the operation of basic machinery at jetty and electric machineries are driven with the status of low efficiency. This paper would suggest the energy saving method for these ships. The investigation describes that shore connection is a great asset to these ships and that the flow rate control by adjusting revolution with the adoption of inverter is better than flow rate control by using throttle valve to save energy. The result is based on the investigation of cooling pump at MMU training ship.