• 해양환경안전학회지
• /
• 제28권4호
• /
• pp.533-541
• /
• 2022

최근 5년간 발생한 해양사고를 분석한 결과, 소형선박은 전체 좌초사고의 77.0 %를 차지하고, 인명사상도 66.1%로서 매우 높았다. 목포지방해양안전심판원은 2021년 72건을 재결하였고, 이중 좌초사건은 10건이었다. 그리고 좌초사건 중 8건은 소형어선에서 발생하였다. 본 논문은 2021년 목포지방해양안전심판원에서 재결하였던 소형어선에서 발생한 8건의 좌초사고에 대해 분석하였다. 이 소형어선의 좌초사고는 맑은 날씨에 시정이 2~4마일로 양호하고, 파고 1미터 이내로 양호한 해상상태에서 발생한 것을 파악되었다. 그리고 좌초사고의 주요 원인은 피로에 따른 졸음 운항, 경계 소홀, 선위확인 소홀, GPS Plotter 과신, 해도도식 및 조석간만의 차에 대한 이해부족 등인 것으로 나타났다. 이에 소형어선의 좌초사고 저감을 위해 다음의 방안을 제시하였다. 첫째, 갑판부 항해당직 부원교육을 이수한 선원이 선장을 보좌하도록 하여야 한다. 둘째, 졸음 방지용 경보장치는 조타실에 설치하여야 한다. 셋째, GPS Plotter의 성능기준과 최신화를 위해 제도는 마련되어야 한다. 마지막으로, 소형어선 선장은 주기적으로 해도도식과 기초 지문항법을 숙지할 수 있도록 교육을 받아야 한다.

• 대한치과기공학회지
• /
• 제31권4호
• /
• pp.55-66
• /
• 2009

This research collected the curriculum for Dental Technology from a total of 20 schools --3-year colleges and 4-year colleges-- all in Korea. And we analyzed the average credits of subjects from students. As a result of this analysis, we get the conclusion below: 1. In the arithmetic mean of the major basis subjects which graduates and undergraduates answered about each subjects; Seminar, Dental morphology I II, Dental morphology practice I II, and Dental devices & instruments don't have many credits. And averages of the major application subjects credits which are Implants(especially low), Occlusal anatomy practice I II, Dental ceramics practice I II, and Dental ceramics practice are low, mostly have a converged tendency in high points. 2. In an analysis of the correlation which is based on the major basis subjects: Dental esthetic, oral anatomy I II, Dental materal practice III, Dental casting pracedure, Oral hygiene, Health & medical law, Management administration, and Medical terminology have a meaningful difference. (${\rho}$ < 0.05) 3. In an analysis of the correlation which is based on the major application subjects; Crown and bridge prosthodontics practice IV, Complete denture prosthodontics I II III, Complete denture prosthodontics practice I II III, Dental ceramics I II, Dental ceramics practice I II, Dental ceramics practice IIII, Occlusal anatomy I II, Occlusal anatomy practice I, Operative dentistry laboratory technology I, Operative dentistry laboratory technology practice II, Dental attachment laboratory technology practice, Implants, and Dental laboratory clinical practice have meaningful difference. (${\rho}$ < 0.05) 4. In an analysis of the correlation which is based on the ratio of a theory to an actual training; 40:60(38.57%) is the highest, followed by 30:70(30.04%), 50:50(23.32%), 60:40(5.83%), and 70:30(2.24%). These have meaningful difference. (${\rho}$ < 0.05) 5. In an analysis of the correlation which is based on the distinction of sex: Partial denture prosthodontics practice I II III, Complete denture prosthodontics I II III, Complete denture prosthodontics practice I II III, Occlusal anatomy practice I II, Implants, Medical terminology have meaningful difference. (${\rho}$ < 0.05) For the purpose of training entrepreneurs of middle standing who is required by a future society, Department of Dental Technology's Curriculum need to be managed with planning a curriculum which reflects opinions of graduates, undergraduates and a society, and also are considered not focusing on a supplier but focusing on a user.

• 수산해양기술연구
• /
• 제43권2호
• /
• pp.140-148
• /
• 2007

This paper describes on the real-time monitoring of dredging information for grab bucket dredger equipped with winch control sensors and differential global positioning system(DGPS) using electronic chart display and information system(ECDIS). The experiment was carried out at Gwangyang Hang and Gangwon-do Oho-ri on board M/V Kunwoong G-16. ECDIS system monitors consecutively the dredging's position, heading and shooting point of grab bucket in real-time through 3 DGPS attached to the top bridge of the dredger and crane frame. Dredging depth was measured by 2 up/down counter fitted with crane winch of the dredger. The depth and area of dredging in each shooting point of grab bucket are displayed in color band. The efficiency of its operation can be ensured by adjusting the tidal data in real-time and displaying the depth of dredging on the ECDIS monitor. The reliance for verification of dredging operation as well as supervision of dredging process was greatly enhanced by providing three-dimensional map with variation of dredging depth in real time. The results will contribute to establishing the system which can monitor and record the whole dredging operations in real-time as well as verify the result of dredging quantitatively.

• 한국콘텐츠학회논문지
• /
• 제14권5호
• /
• pp.281-288
• /
• 2014

본 연구는 울산시에 소재하는 H기업 예비군 동원훈련에 참여한 307명을 대상으로 보철물(틀니, 브릿지)과 임플란트 기대 수준에 대한 인식을 조사하고, 환자교육 및 상담에 기초자료로 활용하고자 한다. 보철물 기대수준의 신뢰도 cronbach'${\alpha}$는 .971, 임플란트 기대수준의 신뢰도 cronbach'${\alpha}$는 .967로 높게 나타났고 자료의 분석은 IBM SPSS Statistics. v. 19.0 프로그램을 이용하였으며, 유의수준은 0.05로 고려하였다. 연구결과는 첫째, 보철물 기대수준은 평균 3.98점으로 나타났다. 둘째, 임플란트 기대수준은 평균 3.74점으로 나타났다. 셋째, 주관적 건강상태에 따른 임플란트 기대수준은 평균 3.74점으로 나타났고 통계적으로 유의하였다(p=0.003). 넷째, 구강위생관리 관심정도에 따른 임플란트 기대수준의 차이는 평균 3.74점으로 나타났고 통계적으로 유의하였다(0<0.001). 다섯째, 보철물 기대수준과 임플란트 기대수준은 0.392로 강한 양의 상관관계를 나타났다. 위의 결과로 보철과 임플란트에 대한 정확한 정보전달이 필요하다.

• 수산해양기술연구
• /
• 제22권2호
• /
• pp.22-30
• /
• 1986

It is very important for a navigator on bridge to know the maneuverability of his ship sufficiently at sea. Generally, the data of a turning circle test have long been used to study and evaluate the maneuverability of a ship. But referring only the data of the turning circle test method, he can not evaluate his ship's maneuvering characteristics sufficiently. So nowaday the test method added Z test to turning circle test for more detail references is considered to be desirable. In this paper, the authors performed PAL test and Z test together in order to study the maneuverability of M. S.Pusan 403, training ship of the National Fisheries University of Pusan. According to the results of PAL test, the rudder effect in port rudder angle of the M. S. Pusan 403 was found to be more effective than that in starboard one, because her changing amounts of angular velocity, turning radius and tangent speed in port rudder angles were found to be larger than those of them in starboard rudder one in unsymmetry. The relation between her drift angle(.8) and rudder angle (0) was found to be changing with .8=0.640 in direct proportion. As it appeared that her calculated K'-values were smaller than the standard K'-values of different kinds of ships in accordance with her Z test, her turning ability was found to be lower. The running distance of a turn in her 10$^{\circ}$ Z test was about 8.3 times her own length and was found not to be exceeded the standard maneuvering distance, therefore she was considered to have good maneuverabilities synthetically.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.3-3
• /
• 2011

After the dissolution of the Soviet Union, the Kra-Araks Basin (KAB) became an international river basin with respect to the South Caucasus states of Armenia, Azerbaijan, and Georgia. However, there are no agreements regarding water allocation, water quality, or ecosystem maintenance among the aforementioned riparians. The main water problems in the basin include not only water quantity and quality, but also the lack of joint management. The aforementioned countries share many similar circumstances: location in a politically unstable but strategic region bureaucratic and structural issues; and more importantly, ongoing ethnic and related conflicts. Despite these obstacles, the countries recognize that they depend greatly on the basin, whose waters they must share. To that end, they proposed and participated in the joint NATO-OSCE South Caucasus River Monitoring (SCRMP) project between 2002 and 2009.The SCRMP sought to investigate and characterize the surface water quality in the KAB by providing equipment and training to all three countries. Several years' worth of water quality data were collected in the KAB: major ions; heavy metals; POPs (persistent organic pollutants); and radionuclides; The North Atlantic Treaty Organization (primary funder) and the Organization for Security and Co-operation in Europesupported the SCRMP not only to build capacity but also to promote cooperation and minimize conflict over water and other resources, thus providing a measure of security for Europe and other regions. The South Caucasus is a strategically-important region, functioning as a bridge between Asia and Europe. Energy-rich Azerbaijan seeks to become a key player in trade by serving as a transportation and energy hub between the energy and mineral-rich Central Asian KUT countries (Kazakhstan, Uzbekistan, and Turkmenistan) and Western Asia, Europe, and other areas. The presentation will summarize the scientific results of the SCRMP, elucidate the regional water-energy-security nexus, discuss future work in the region, and explain why the world needs to be concerned about the KAB and the entire South Caucasus.

• 한국통신학회논문지
• /
• 제29권9A호
• /
• pp.991-997
• /
• 2004

본 논문은 HomePNA 2.0 모뎀 칩을 위한 모뎀 수신부의 구조를 제안한다. HomePNA 2.0 전송 채널은 브릿지 탭과 HAM 대역의 영향 등으로 매우 열악하다. 이러한 채널을 통해 전송을 가능하게 하기 위해 HomePNA 2.0 은 훈련신호를 사용하여 매 프레임 마다 채널을 등화하고 FD-QAM 전송 방식을 선택적으로 사용한다. 따라서 모뎀 수신부는 일반적 QAM 방식 신호의 북조 기능과 함께 이러한 전송 방식의 특정을 최대한 상려 모뎀 수신 성 능을 극대화 히는 구조가 필요하다 연구 결과 모뎀 수신부의 가능을 송수신 상태에 따라 정상 수신 모드와 충돌 감지 오드의 2 가지로 정의 하였다 본 논문은 특히, 모뎀 수신부를 구성하는 핵심 블록인 등화기와 위상 동기부, 프레임 동기부에 대해서 사용된 알고리즘을 밝혔으며, 버스트 방식 모뎀의 채널 등화 성능을 높이고 안정적으로 동작 시키기 위한 구조를 제얀 하였다 마지막으로 제안된 모뎀 수신부의 성능을 분석하기 위해서 SPW 모델을 사용하여 채널 별 전송 가능 속도를 예측 하였다.

• Archives of Reconstructive Microsurgery
• /
• 제16권2호
• /
• pp.133-143
• /
• 2007

For the better success in the society, it is important to collect opinions from members. The progress was slow before because it was hard to collect the opinions from each member. But since we have opened the web site it gets easier to evolve with the society for microsurgery, and expect to have active participations from the members. We make 20 questions in three different groups. The researches are made on participation, development in science council that starting from 2005 October to 2007 June, education on training with member's preference to thesis and individuality and suggestion. Thus we have results following to that research. 1.75% of the members vote for the lecture has to be substantial, and also want the atmosphere of the council to be more sincere. 46.2% of members want the council to be not only exchange information but also the place to experience the social intercourse. 2. When the thesis is present and submitted that will also connect to main society. It will be counted as equal as board thesis, only if the thesis can count in both plastic & reconstructive surgery and orthopedic surgery. Then it will be scored as same as examination of board, and will be a receipt of paper by home page 3. The information-oriented project on our council is slower than what members expected. 100% of members voted yes to online thesis examination, and 66.7% of members voted for preference of web site. We need to make improvements on our web pages as soon as possible such as online payment with credit card. 4. According to the result of questionnaire, our web site helps member's participation in council and eventually become a bridge between members. We hope the questionnaires would help us to develop the council and eventually would help us to society with each other in the council. We also hope this council would be the one that connect all of us in society.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1251-1264
• /
• 2018

The systematic and effective design method of a Class-D current-source resonant inverter for use in an induction cooker with zero-ripple line current is presented. The design procedure is based on the principle of the Class-D current-source resonant inverter with a simplified load network model that is a parallel equivalent circuit. An induction load characterization is obtained from a large-signal excitation test-bench based on parallel load network, which is the key to an accurate design for the induction cooker system. Accordingly, the proposed scheme provides a systematic, precise, and feasible solution than the existing design method based on series-parallel load network under low-signal excitation. Moreover, a zero-ripple condition of utility-line input current is naturally preserved without any extra circuit or control. Meanwhile, a differential-mode input electromagnetic interference (EMI) filter can be eliminated, high power quality in utility-line can be obtained, and a standard-recovery diode of bridge-rectifier can be employed. The step-by-step design procedure explained with design example. The devices stress and power loss analysis of induction cooker with a parallel load network under large-signal excitation are described. A 2,500-W laboratory prototype was developed for $220-V_{rms}/50-Hz$ utility-line to verify the theoretical analysis. An efficiency of the prototype is 96% at full load.

• 대한의용생체공학회:의공학회지
• /
• 제43권3호
• /
• pp.177-184
• /
• 2022

The purpose of this study was to present the IMU sensor based trunk stabilization exercise and to evaluate the changes in the muscle activity and thickness with non-specific low back pain patients (N=30). They were classified into two groups; lumbar stabilization exercise using IMU sensor (ILS), (n₁=20) and general lumbar stabilization exercise (GLS), (n₂=10). By comparing the difference between pre and post intervention via trunk muscle activity and muscle thickness, the significant differences were identified. Muscle activity was measured on external oblique (EO), internal oblique (IO), and multifidus (MF) by using surface electromyography (sEMG). Muslce thickness was measured on external oblique, internal oblique, transverse abdominis (TrA), and multifidus (MF) by using ultrasonography. sEMG activity was recorded at right side-bridge position. Each group performed the proposed lumbar stabilization exercise for 30 minutes a day, 5 times a week for 4 weeks. Trunk muscle activity was observed with a significant increase in the IO of ILS (p<.05) and a decrease in the MF of GLS (p<.05). Trunk muscle thickness was significantly increased in left EO and both IO of GLS (p<.05), and also significant increased right EO, both IO, both TrA, and both MF of the ILS (p<.05). In the future, a convergence approach of rehabilitation and engineering is needed to select a sensor suitable for rehabilitation purposes, study the validity and reliability of data, and produce appropriate rehabilitation contents.