• Fire Science and Engineering
• /
• v.27 no.5
• /
• pp.8-14
• /
• 2013

In the subway, various fires continue to take place across the world. In the Daegu subway accident in 2003, many people were damaged by shortened visibility range caused by toxic gas and smoke. This paper, assuming that a subway fire happens in the Mandeok Station of the subway system in Busan, analyzed different smoke-spreading situations depending on the ventilation situation at its platform (opening of the train doors, operation of ventilation facilities in the tunnel, and working of fire door), using FDS. The calculation proved that it would be more effective to secure evacuation route when the ventilation facilities of the tunnel are not operated, than when they are on. And, it was also found that the case where the doors of the platform to the escape route and only the platform-facing doors of the subway car on fire office are open would be more effective to ventilation than the case where all the doors are open. And, it was found to be important that the fire doors of the platform are working properly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2844-2850
• /
• 2015

Rolling noise caused by the contact between the train wheels and rails is the main factor of noise generated by the operation of railway, therefore the features of rail vibration and its correlations with noise radiation should be identified. In this study, noise radiation generated from vibration were predicted by utilizing FE model with boundary element method. Noise radiation generated from vibration were predicted by utilizing FE model with boundary element method, and were compared with the measured noise in order to validate the reliability of the analysis method. In addition, the features of noise radiation according to the rail attenuation were examined in the frequency domain, and the noise radiation has been reduced by approximately 3dB(A) with additional rail damping.

• Journal of Engineering Education Research
• /
• v.17 no.6
• /
• pp.12-19
• /
• 2014

Failure is an important part of engineering practice. Engineers utilize all of their competences and resources in order for their products or processes to meet the initial intention and purpose, and not to fail. However, the technological products sometimes end up with failure. The failure, in many cases, is related to non-technological factors or systems, not just limited to technological factors. Moreover, the evaluation of failure is performed by a variety of agents, including consumers, civic groups, government as well as professional groups. Thus, this study raises an issue that the existing concept of failure, which focuses on the operation of function, is not sufficient enough to properly cover the success or failure of technology required by the modern society. In the recent trends of engineering, new concepts and methods have been developed by expanding the traditional concept or introducing a new perspective of failure, so that engineering failure can be better understood in the mutual relationship between technology and society. This research attempts to suggest a methodology of how the failure of engineering can be utilized and properly combined in the major education, design education and engineering ethics education. Also, it aims to contribute to the quality improvement of engineering education to train engineers who can lead the society with responsibility as well as professional competence.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.2
• /
• pp.23-33
• /
• 2012

Recent technological advances in the domestic railway industry have turned out to deliver a profound impact on the forefront of other industries as well. Furthermore, the introduction of the high-speed railway systems has made it possible to travel around our country in a day, thereby changing our life styles a lot. However, it has been well recognized that many factors can cause unanticipated accidents during the operation. One of the causes is known to be the human errors made by the train operators in locomotive cabs. The problem is getting more serious as the trains run at high speed. As such, the objective of this paper is on how to improve the work environment of the locomotive cabs. Our approach is based on the systems engineering methodology. Specifically, we first identify the context and scope of the problem to be solved. We then continue our effort in deriving the requirements set to accomplish the improvement. These results are utilized in constructing a computer-aided management system for test and evaluation intended for the improvement. The approach taken and the results obtained in this paper is expected to make a contribution on the route to keeping our nation's technologies on the competitive edges in the high-speed railway systems industry.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1269-1278
• /
• 2009

The Seoul metropolitan area is generated the transportation problems of traffic congestion, delay of travel time, etc due to the increase of traffic demand at Seongnam area, Koyang/Paju area, Incheon/Bucheon area, etc, because that have not provided the urban surrounding railway network and live to be concentrated about 49% of the population of Korea. The Koyang/Paju route axis is required the urban surrounding railway network because the share percentage of public transportation is 51%, the automobiles is 48.8% and the subway is 27.3% and the housing development plan for 530,000 persons have provided. According to the result of the study for the introduction of the express railway between Kangnam to Ilsan of 37.8Km, in case of operation of 150Kmm at express railway, the scheduled speed between Kangnam to Ilsan is 103Km/h, the running time is about 23 minutes. The demand of traffic of this project was forecasted about 237,000persons by traffic analysis. This project which was analysed B/C of 1.08 by the result of the feasibility study have a economic feasibility.

• Journal of Korean Society on Water Environment
• /
• v.24 no.1
• /
• pp.91-98
• /
• 2008

This work was performed to develop a model possible to predict the influent flow and influent components, which are one of main disturbances causing process problems at the operation of municipal wastewater treatment plant. In this study, artificial neural network (ANN) was used in order to develop a model that was able to predict the influent flow, $COD_{Mn}$, SS, TN 1 day-ahead, 2day-ahead and 3 day ahead. Multi-layer feed-forward back-propagation network was chosen as neural network type, and tanh-sigmoid function was used as activation function to transport signal at the neural network. And Levenberg-Marquart (LM) algorithm was used as learning algorithm to train neural network. Among 420 data sets except missing data, which were collected between 2005 and 2006 at field plant, 210 data sets were used for training, and other 210 data sets were used for validation. As result of it, ANN model for predicting the influent flow and components 1-3day ahead could be developed successfully. It is expected that this developed model can be practically used as follows: Detecting the fault related to effluent concentration that can be happened in the future by combining with other models to predict process performance in advance, and minimization of the process fault through the establishment of various control strategies based on the detection result.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.317-324
• /
• 2015

A super speed maglev is a complicated system integrating electric, electronic, mechanic, civil and construction engineering. So, there must be an integrative system to monitor and manage operation requirements and standard features of each subsystem and the interfaces between each technology. As an indispensable part that can ensure whole system performance, a secure interface for each individual subsystem is an important management item of system engineering. By securing the interface performance of each individual subsystem, system failure can be effectively prevented in advance. Based on system engineering techniques, improvement of security and reliability for a super speed maglev is described in this research.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.441-449
• /
• 2016

Today, as a daily routine such as administration/finance is operated under information system and various cyber crime against national, public, and private institutions happen, demand for information security manpower is increasing. Hence, Ministry of Education has formed an Institute of Information Security Education for the Gifted to early discover talent in the field of information security and train professional personnel with specialty and ethics in 4 universities of country in 2014. But the nascent Institute of Information Security Education for the Gifted lack systematic analyses compared to Institute of Mathematics and Science Education for the Gifted that has existed from a long time ago. In this paper, we analyze the state of the Institute of Information Security Education for the Gifted in three parts: operation, selection, education and suggest an improvement to build a practical program for effective operations and education.

• Journal of Convergence for Information Technology
• /
• v.8 no.2
• /
• pp.203-208
• /
• 2018

This study is concerned with the introduction and operation of smart factories. In order to accomplish the purpose of research, we made a standard system of smart factory and investigated the recognition system. This study was conducted as a grounded theory methodology among qualitative research methodologies. The results of the study are the necessity of a tool to appropriately evaluate the new manufacturing process management system and related management activities to achieve the successful introduction of smart factories and the management performance of the organization. In order to successfully implement the Smart Factory Certification System, it is necessary to establish a certification organization system, enact relevant laws and amendments, operate government-led pilot projects, train professional workers, and establish incentive policies.

• Journal of the Korean Society for Railway
• /
• v.18 no.1
• /
• pp.43-52
• /
• 2015

In this study, to minimize both the costs associated with track maintenance and the energy consumption for train operation, a numerical method that evaluates the optimal vertical stiffness of a fastener for concrete track is presented. A progress model of the track damage is established in order to calculate the concrete track maintenance cost according to the fastener stiffness. Also, the quantitative relationship between the progress of the track damage and the maintenance of the concrete track is derived. The wheel load is more exactly evaluated by using the advanced vehicle-track interaction model, which can precisely consider the behaviors of the track components. An optimal range for the stiffness of the fastener, a range that is applicable to the design of concrete track for domestic high speed lines, is proposed.