• 한국정밀공학회지
• /
• 제30권11호
• /
• pp.1187-1192
• /
• 2013

In the case of 4 wheel drive (4-WD) type car, power switching occurs to 4-WD by operating lever or switch that operates power switching device attached in transfer case which can operate motor by electric signal. So if the RPM of motor is high, power switching will not exactly occur and can cause damage to gear in transfer case according to circumstances. So in this study, we applied 2 level of planet gear type motor spindle of motor drive part of a power train. And conducted decelerating to increase torque to switch power safe and accurately. Also, we researched efficiency of gear by designing reduction gear ratio and gear type and by calculating contact stress and bending strength. Based on researched content, we made drive head of power switching device and a reduction module which uses type that uses motor spindle as sun gear and ring gear as cover.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.51-57
• /
• 2011

Parametric studies based on analysis of lubrication system of a four cylinder gasoline engine are illustrated system in this paper. In development process of engine lubrication system, parts of failure cases are related with oil pull over and oil churning phenomenon. The crankcase & head system pressure by oil churning phenomenon are gradual increased. It cause oil pull over phenomenon at engine breather line and oil over-consumption. In order to improve oil reduction and oil pull over phenomenon are also considered in the developing state. For this study, the characteristics of engine lubrication system are measured at various tilting angle and drain hole sizes. In addition, the oil flow & oil quantity are tested by blow by meter and catch jar. Results are presented to stabilize the oil supply system at sever driving condition. The data from present study are available for the engine lubrication system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.118-121
• /
• 2008

Bimodal tram is a transit with no-step floor for wheel-chaired persons, with docking to the station precisely and moving on schedule like train. Because of the automatic traveling of bimodal tram to search and follow the magnet embedded in roadway, bimodal tram should be careful about rainfall, snow and wind like a car driving on roadway in respect to natural disasters. Though response procedures in emergency are different according to the passengers' boarding, emergency mobilization is needed if any emergency situation happens. Emergency mobilization is the act of preparing for major catastrophic events, which may affect public transportation systems or their service areas, by assembling and organizing resources, including people, equipment, facilities, communications systems, expert technical support, and public information systems and protocols. Mobilization is the process that ensures that the right people will deploy appropriate resources at the correct time. Effective mobilization requires a partnership of local and state agencies. Public transportation operators and systems play vital roles in response to and recovery from emergencies and other unexpected catastrophic events. These systems, and their capabilities to mobilize resources, are profoundly affected by the decisions and directives of others during these activities. In this study, we focused on the emergency management for bimodal tram and reviewed the considerations about infrastructures under natural disasters, especially heavy rainfall.

• 한국수소및신에너지학회논문집
• /
• 제23권4호
• /
• pp.330-336
• /
• 2012

FCEV uses 250 ~ 450 V instead of using 12 V battery. High voltage vehicle can cause electric shock, fire and explosion accident. Therefore, it has potential factors that can cause hazard of safety for users. United states of America and Europe legislate regulations such as ECE R100, FMVSS 305 for regulating electrical safety during driving or after collision. The company manufacturing high voltage components must do advanced R&D about Method for improving and confirming the safety of high voltage. We develop the specific hardware components of high voltage wiring system for the power train system and power supply system of Hyundai Motors FCEV. This paper shows test method of insulative performance for securing the electrical safety of high voltage components such as power cable, connectors and buss-bar, and proposals the guide line value for human safety of FCEV according to the test result of our development components.

• 전기학회논문지P
• /
• 제59권3호
• /
• pp.268-274
• /
• 2010

Urban rail transit brings the benefits of various aspects of society. With the advent of fast and large trains, however, risk and scale of accidents have increased. Despite the fact that there is various safety features built into the modern metros, train faults happen from time to time. Especially, as urban railway vehicles in Korea have become deterioration rapidly, more advanced diagnosis methods are required to prevent various accidents. In this paper, we present diagnosis method for electrical wires to guarantee secure driving and authenticity more accurately in urban railway vehicles. Although there are kinds of conventional methods based on insulation resistance measurement and withstand test, it is extremely difficult to effectively diagnose obsolete equipments such as electrical wires and cables not new ones. This study is focused on development of diagnosis method and establishment of evaluation standard for electrical wires in urban railway vehicles.

• 전력전자학회논문지
• /
• 제15권6호
• /
• pp.487-497
• /
• 2010

본 논문에서는 직렬형 하이브리드 자동차의 운전특성을 분석하기 위한 PSIM 시뮬레이터의 개발에 대하여 기술한다. 직렬형 하이브리드 자동차는 엔진이 전동기와 전기적으로 결합되어 있으며 전동기의 출력에 의해서만 구동된다. 엔진/발전기, 전동기, 기어와 같은 파워트레인 각 구성요소들의 정격은 에너지 개념을 이용한 시스템과 Electrical Peaking Hybrid (ELPH)를 이용하여 모델링할 수 있는데, 설계된 하이브리드 자동차를 개발된 PSIM 시뮬레이터를 이용하여 특정 운전주기 하에서 평가하고 분석하였다. 기계적 제동이 사용되는 경우와 회생제동이 사용되는 경우 각각에 대하여 전동기의 평균 입력을 비교하였으며 시뮬레이션 결과를 바탕으로 직렬형 하이브리드 자동차의 연비를 분석하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.567-573
• /
• 2003

Korean High Speed Train (KHST) has been tested on high speed line in JungBu site since it was developed in 2002. The data acquisition system was developed to accomplish successfully this on-line test for proving the dynamic Performance of KHST. This system was consist of the personal computers based on National Instrument PXI modules and the test programs based on Labview 6i. This paper shows that this system is efficient to acquire the test data through the multi-channels connected the accelerometers which located in long distance places and flexible to change and add channels for data acquisition. The dynamic analysis of an on-line test is very complicate because the environmental conditions, as examples radius of curve, inclination of the track, tunnels, bridges, and so forth, and running conditions, as examples driving, braking, the number of working motors, and so forth, have an effect on the results. Therefor, the analysis method is important and this paper proposes the efficient procedure graphically, showing the proposed method simplify the accelerations of 5th bogie frame acquired during the on-line test for KHST.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.28-33
• /
• 2016

Since defects in the wheels of railway vehicles, which occur due to wears with the rail, cause serious damage to the running device, the diagnostic monitoring system for condition-based maintenance is required to secure the driving safety. In this paper, we studied to apply a useful Cepstrum analysis to detect periodic structure in spectrum among the vibration signal processing techniques for the fault diagnosis of a rotating body such as wheel. In order to analyze in variations of train velocity, the Cepstrum analysis was performed after a domain change of the vibration signal from time domain to rotation angle domain. When domains change, it is important to use a interpolation for a uniform interval of the rotation angle. Finally, the Cepstrum analysis for wheel flat detection was verified by using the vibration signal including the disturbance resulting from the rail irregularities and the vibration of bogie components.

• 드라이브 ㆍ 컨트롤
• /
• 제14권4호
• /
• pp.29-36
• /
• 2017

Electronic control technologies that have long been developed for passenger cars spread to construction equipment and agricultural vehicles because of its outstanding performance achieved by embedded software. Especially, system program of transmission control unit (TCU) plays a crucial role for the superb shift quality, driving performance and fuel efficiency, etc. Since the control algorithm is embedded in software that is rarely analyzed, development of such a TCU cannot be conducted by conventional reverse engineering. Transmission simulator is a kind of electronic device that simulates the electric signals including driver operation command and output of various sensors installed in transmission. Standalone TCU can be run in normal operation mode with the signals provided by transmission simulator. In this research, transmission simulator for the tracked vehicle TCU is developed for the analysis of shift control algorithm from the experiments with standalone TCU. It was confirmed that shift experimental data for the simulator setup conditions can be used for the analysis of control algorithms on proportional solenoid valves and shift map.

• 한국지반환경공학회 논문집
• /
• 제15권2호
• /
• pp.45-52
• /
• 2014

차량의 양호한 주행성능 확보를 위한 터널공사의 증가와 더불어 터널시공 중 터널 붕락 및 과다변위 발생사례가 증가하고 있다. 터널공사의 특징이 지반의 강도특성을 최대한 이용하는 경험적인 시공방법이라는 측면에서 터널붕락 및 과다변위 발생사례에 대한 붕락 및 과다변위 발생 원인분석이 중요하다. 따라서 본 논문에서는 취약지반조건에서 대표적인 붕락 및 과다변위 발생사례의 붕락 원인에 대하여 분석하였다. 분석결과, 국지성 강우량의 증가, 시공 중 계측값의 지속적인 증가, 단층파쇄대가 지표면까지 연결되는 지반조건이 공통적으로 존재하는 경우 대규모 붕락 또는 과다변위가 발생한 것으로 분석되었다.