• The Journal of the Korea Contents Association
• /
• v.17 no.1
• /
• pp.50-57
• /
• 2017

This study investigated the causes and problems of train operation impediments through the statistics analysis of 8 years'internal data of Daejeon Metropolitan Express Transit. By evaluating the risks regarding the system, equipment, and parts of high risk group, this study measured the Risk Index Severity, and applied the $5{\times}5$ Risk Assessment Matrix which is a method of risk management to calculate the scale of risk to analyze the safety level and allowance range. As a result, the car sector, the most serious risk, followed by machinery and equipment sector showed that the inherent risk. In particular, the door broken and the door rail signaling and control devices due to defects of the vehicle is high, but also the severity, and frequency are showing very frequent additional potential accidents. PSD also had defects in the machinery sector appeared to be the most dangerous of the PSD poor safety gates, it was found that the glass also involve the risk of mishandling and breakage of the PSD. This study intended to contribute to the transportation benefits through the safety and stable operation of Metropolitan Express Transit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1337-1345
• /
• 2009

In the railway, the delay of a train may affect the schedule of other trains. Hence, the timetable management activity involving overtaking and transferring becomes an important issue. The timetable rescheduling is the conflict resolution of the disrupted schedule and a matter of deciding the sequence of moves among trains and the place for meeting. In Korea, there are few cases where operations research models were applied to railway timetable rescheduling problem in consideration of the transfer between Korea Train eXpress (KTX) trains and conventional trains. Hence, we present a mathematical approach that can minimize the total delay of the whole trains secondly. We applied the model to the exemplary section of a double-line track, the Gyung-Boo Line, and it is confirmed that the mathematical model could effectively address the transfer service as well as the complicated railway conflicts of Gyung-Boo Line.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.12-19
• /
• 2016

The monitoring system in railway is under study to forecast any derailment and accident by defect of train. Because the monitoring system is composed of wireless sensor network based on ZigBee-communication between inside and outside of train, the study for wireless channel analysis is required. Especially, if multipath delay profile exist in the channel, the equalizer and channel estimator can be required for preventing receiver performance degradation. Therefore, we analyzed the wireless channel in train environment using measured data and, proposed the channel estimation method through the characterisitic of chip code, under the consideration of the channel characteristics in train. To show the performance of proposed method, we demonstrate the performance by mean square error(MSE), computational complexity and bit error rate(BER).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.68-71
• /
• 2018

In this paper, we propose a synchronization protocol for underwater acoustic networks which aims to minimize the effects of long propagation delay and uncertain delay variations and employs packet train scheme with considering low data rate. The proposed protocol uses an one-way delay measurement method by transmitting consecutive packets and acquires synchronization only considering propagation delay variations by calculating packet arrival time differences. We perform simulations under various network conditions, such as node mobility, time interval for packet transmission, network range, and elapsed time after synchronizing. The simulation results shows the superiority of our protocol, compared with a previously proposed protocol.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3851-3857
• /
• 2014

Shippers' requests of freight trains vary with time, but generating an additional schedule of freight trains is not easy due to many considerations, such as the line capacity, operation rules, and conflicts with existing trains. On the other hand, an additional freight train schedule has been continuously requested and manually processed by domestic train operation companies using empirical method, which is time consuming. This paper proposes a model to determine the additional freight train schedule that assesses the feasibility of the added freight trains, and generates as many additional schedules as possible, while minimizing the delay of the existing schedules. The problem is presented using time-space network, modeled as multi-commodity flow problem, and solved using the column generation method. Three levels of experiment were conducted to show validity of the proposed model in the computation time.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.60-67
• /
• 2001

As a method of variable valve train(VVT), Electro-Mechanical Valve(EMV) has been studied. Compared with conventional VVT system, the EMV system has a relatively simple structure. The system has two electromagnets, springs and an armature. The system can be operated by reciprocal action between armature and two electromagnets. And, the operating event can be controlled by electrical signal from controller. Therefore, reduction of emission and fuel consumption can be achieved through valve event control at each engine operating condition. In this study, characteristics of EMV system were investigated by simulations and experiments. The results of simulation and experiment show that the core shape and material characteristics are dominant parameters on magnetic force and delay time. In order to apply the system to commercial engine, it has a compact size and high stiffness springs(50N/mm) to increase the valve speed. Because of high valve seating velocity, loud noise and high impact force generated, which can lead to reduction of actuator durability. Therefore, further research is required to reduce valve seating velocity.

• Industrial Engineering and Management Systems
• /
• v.12 no.3
• /
• pp.281-287
• /
• 2013

In this paper, we introduce a roots method that uses the roots inside the unit circle of the associated characteristics equation to evaluate the steady-state system-length distribution at three epochs (pre-arrival, arbitrary, and post-departure) and sojourn-time distribution in GI/PH/1 queueing model. It is very important for an air base to inspect airplane oil because low-quality oil leads to drop or breakdown of an airplane. Since airplane oil inspection is composed of several inspection steps, it sometimes causes train congestion and delay of inventory replenishments. We analyzed interarrival time and inspection (service) time of oil supply from the actual data which is given from one of the ROKAF's (Republic of Korea Air Force) bases. We found that interarrival time of oil follows a normal distribution with a small deviation, and the service time follows phase-type distribution, which was first introduced by Neuts to deal with the shortfalls of exponential distributions. Finally, we applied the GI/PH/1 queueing model to the oil train congestion problem and analyzed the distributions of the number of customers (oil trains) in the queue and their mean sojourn-time using the roots method suggested by Chaudhry for the model GI/C-MSP/1.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.204-209
• /
• 2003

Recently, The TCN(Train Communication Network} as the distributed control systems for electric vehicles, which is the international standard of the intra vehicle communication, actively recognizes variations and supports reconfiguration of the train network when a vehicle is separated or recombined. The technique of reconfiguration to take variety and interoperability of a vehicle constitution is used when the vehicle constitution is changed. At the time, each node making up vehicle network shares the information about the variation of vehicle constitutions and the state of nodes. In the hierarchical TCN structure, an exchange of data becomes available as a work to transmit information between components is performed at the node playing a role of gateway. This paper proposes a protocol to transmit the information of the train reconfiguration. The protocol gives an application to renew a list for transmitting information and to perform the transmission that can guarantee periodic and non-periodic data transmission between nodes when the network nodes changed by a variation of the network state are reconfigured. If use this protocol, can use functions that are offered in the electric railcar at the same time that composition of vehicles is completed without delay. And when driver of the electric railcar inspect before running of vehicles, can confirm state of vehicles visually through monitor in driver's room.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.357-361
• /
• 2013

A regenerative Er-doped fiber amplifier system for a high-repetition-rate optical pulse train is investigated for the first time. A signal pulse train with a wavelength tuning range of 18 nm is produced by a passive mode-locked fiber laser based on a nonlinear polarization rotation technique. In order to realize the amplification, an optical delay-line is used to achieve time match between the pulses' interval and the period of pulse running through the regenerative amplifier. The 16 dB gain is obtained for an input pulse train with a launching power of -30.4 dBm, a center wavelength of 1563.4 nm and a repetition rate of 15.3 MHz. The output properties of signal pulses with different center wavelengths are also discussed. The pulse amplification is found to be different from the regenerative amplification system for CW signals.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.91-97
• /
• 2006

Currently, approx. 10,532 turnouts were installed on the KR line, of which 3,644 turnouts were installed in the main line where high speed operation is performed. This shows that it is necessary to improve the performance of turnout as one of vulnerable areas for the safe operation of a train. Even though the number of railway accidents is decreasing every year due to the renewal of railway facilities, there are still many factors that cause the occurrence of an accident. In particular, an incident in turnout area does not only have a high risk of a serious accident but also affect the operation of a train on the adjacent track in most cases, and consequently a big social loss is expected due to the delay in train operation as well as the loss of life and property. The objective of this study is to examine the accidents occurred in turnout area that is one of typical　vulnerable areas over the past ten years, on the basis of the results, and to take an appropriate measure by finding out the major cause of accidents in turnout area so that a systematic safety system can be established to prevent or reduce accidents in turnout area.