• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.223-229
• /
• 2003

This paper proposes the Train control system for the LRT(light rail transit}. With regard to information processing in car, we build a computer network in the car, turned the hardware required for train control into software, and developed the Train Control Monitoring System and ATC. Drive Type of Train control system car can drive with Driverless mode basically, and this paper applied special communication type for car control, data analysis, The propulsion efforts and breaking effort can control the cars. It is used Vector Control in Propulsion control and proposed Operating pattern for Propulsion control thinking Operating data of Rubber Tire LRT.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.178.1-178
• /
• 2001

The ATO(Automatic Train Operation) System is used for train operation instead of dreivers. It is interfaced with TCMS(Train Control and Monitoring System) and ATC/TWC system in the train and wayside facilities. In this paper describes configuration of ATO, Specification of ATO hardware, construction of ATO software and the algorithm for automatic train speed regulation in the carborn ATO system. This paper is mainly concerned with the development of the ATO System. The ATO system is used for automatic or driverless operation of a train using various informations from TCMS, ATC, TWC. In this paper, the general architecture of the ATO system, implementation of ATO application software and the algorithm using servo-controller for automatic train speed controller.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1618-1628
• /
• 2011

The Train Diagnostic and Control System(TDCS) has been equipped on the modern Metro Vehicle, Locomotive and High Speed Train. The main purpose of this system is to support the identification of train status by real-time, the fast action against such failure events during revenue service and the fast convenient maintenance processes. Some of newest TCMS, a kind of control and monitoring system, has participated in the main control functions such as pantograph up and down, powering and braking command and so on. But these kind of control functions of the high speed train which has the operating speed over 300km/h are conducted by the train electrical logic circuits. The KTX-I and KTX-II - the local high speed train, are the typical example. The next generation TDCS for the ongoing project of distributed high speed train(HEMU) is designing with the target to increase main train control functions, to increase the reliability/avalibility and to increase the convenient driving. This paper introduces the overall configurations and functions of the new generation TDCS.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.10a
• /
• pp.166-169
• /
• 1998

열차종합제어장치는 열차내에 설치되는 컴퓨터로서 통신 및 디지털 / 아날로그 입출력을 통해 각 주변기기의 제어와 감시기능을 수행한다. 이러한 열차종합제어장치는 열차운행의 안전성에 있어서 중요한 부분을 담당하고 있으므로 실제 차량에 탑재되기 전에 모든 기능이 제대로 동작하는 지 검증되어야 한다. 열차종합제어장치의 복잡한 기능을 검증하기 위해 열차종합제어장치 시뮬레이터의 구성은 필수적이며, 본 논문에서는 이러한 시뮬레이터의 기능 및 구성방안에 대해서 기술한다.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.509-515
• /
• 2002

Recently, the microprocessor with network function based control system instead of conventional microprocessor is widely used for industrial applications, and also these technologies are widely adopted for train control and monitoring in modem rapid transit system. The purpose of this paper is to propose a criteria for data transmission, which was designed and realized through Korea High Speed Train. Noise, distortion and attenuation are always present in data transmission system and strictly limit performance. This paper describes a method to calculate the propagation constant, attenuation constant, phase velocity and length of stub.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.224-228
• /
• 2004

In these days, as it frequently happens that water level in the river exceeds the design floods due to irregular heavy rainfall, so it is required, first of an, to manage with railroad bridge safely. Because train control criterion under heavy rainfall is still not prepared and automatic flood monitoring system for railroad bridges is not used, worry over invisible economic loss due to train passage delay is in existence. Therefore, it is important to secure the safety and detect the risk like turnover or failure of railroad bridges through systematic disaster prevention system. And the transition from conventional monitoring method to real time monitoring method supported by sensors and communication system with high technology is rapidly needed. This research is on developing the real time flood monitoring system which prevents railroad disasters in advance by detecting continuously the water level of railroad bridge through CCD camera and water level gauge.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.270-273
• /
• 1999

This paper describes the characteristics of two methods about providing information needed for propulsion device control in train. The one is to use new way using the communication network for transmission of control information, the other is traditional way using hardwire connection. And this paper describes the communication interface technique between TCMS(Train Control and Monitoring System) and VVVF inverter system with LonWorks network adapted to SMG line 6 which has been developed. With this technique, an inertia load test carried out for the traction control environment and it is expecting a field test at SMG line 6.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1398-1402
• /
• 2007

In a high speed train, OBCS(On-Board Computer System) is a up-to-date computer control system that provide controlling, monitoring, maintaining and reparing of the important device, supporting a driver, status of a train, service maintenance, managing the remote control mode, driving order & control, control of a electrical or pneumatic circuit and a passenger service. In general, OBCS is located in each car but in a power car, both main and auxiliary computers are used. These avoid a network collision and maintain the independence of condition and failure records with the information of line number, train number and car number. This paper is intended to provide the information about the identification coding method of domestic and foreign OBCS, for the new high speed train (KTX-II).

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1201_1202
• /
• 2009

This paper represents the results of a complete train test of TMS(train control and management system) for korean tilting train express(TTX). This system, installed on TTX is responsible for monitors and controls of various local devices. This kind of test procedure is first time in Korea. So, we made of new standards related on a component test of the TMS and conducted to the complete Component Test and running test on conventional railway. We realized that this device is robust and good performance regarding as communication with other devices and reliability of TMS.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.953-958
• /
• 2007

Passenger safety is a primary concern of railway system but, it has been urgent issue that dozens of people are killed every year when they are fallen from train platforms. In this paper, we propose a vision based monitoring system for railway station platform. The system immediately perceives dangerous factors of passengers on the platform by using image processing technology. To monitor almost entire length of the track line in the platform, we use several video cameras. Each camera conducts surveillance its own preset monitoring area whether human or dangerous object was fallen in the area. Moreover, to deal with the accident immediately, the system provides local station, central control room employees and train driver with the video information about the accident situation including alarm message. This paper introduces the system overview and detection process with experimental results. According to the results, we expect the proposed system will play a key role for establishing highly intelligent monitoring system in railway.