• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.11-20
• /
• 2011

This study aimed to devise the method to construct safe and convenient bicycle road by considering the peripheral environmental factor related to using bicycle. Analyzing the existing design of bicycle road and construction case, this study established the method to design bicycle road that reflects site condition and presented the optimal design method for each type of bicycle road to construct safe and convenient bicycle road by analyzing the type of traffic accident for each type of bicycle road, surveying present situation and local survey. It was found that the optimum design of bicycle road for specification, width, curve radius, ascending slope, etc in consideration of peripheral environment and separating traffic between users of traffic means should be done by installing safety sign, safe facilities and separation facilities to design safe bicycle road. Further, the minimum traffic space of bicycle users and connection between bicycle roads should be ensured to design safe bicycle road. It is judged that information related to safety and convenience of bicycle road such as slope, route information, location of convenience facilities, information to the public traffic should be provided so as to activate the users of bicycle.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1279-1287
• /
• 2014

The purpose of this study is to develop the U-turn accident model at signalized intersections in urban areas. The characteristics of the accidents which are associated with U-turn operation at 3 and 4-legged signalized intersections was analyzed and the U-turn accident model was developed by regression analysis in Changwon city. First, in order to analyze the effectiveness on traffic accidents by U-turn installation, the difference of mean of traffic accident number are measured between two groups which are composed by whether or not U-turn installation the groups by Mann-Whitney U test. The result of significance test showed that intergroup comparison on mean by accident types made difference except rear-end accident type and by accident locations exit section only showed difference in significance level at 4-legged intersections, so the accident number have more where the U-turn is permitted than not. Response measures about the number of accidents were classified by whether accidents occurred and accident model were constructed using binomial logistic regression analysis method. The developed models show that the variables of conflict traffic, number of opposing lane are adopted as independent variable for both intersections. The variables of longitudinal grade for 3-legged signalized intersection and number of crosswalk for 4-legged signalized intersection at which the U-turn is permitted is adopted as independent variable only. These study results suggest that U-turn would be permitted at the intersection where the number of opposing lane is more than 3.5 each, the longitudinal grade of opposing road is upward flow and there is need to establish the U-turn traffic sign at signalized intersections.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.24-32
• /
• 2007

Variable message sign (VMS), which is used for providing real-time information on traffic conditions and accident occurrences, is one of the important components of intelligent transportation systems. It is essential that the scheme of VMS message phase and duration should be designed with the consideration of drivers' message reading time that will be depended on various causal factors, such as the amount of VMS messages, drivers' travel speed, and geometric conditions. However, there have been not much efforts to explore the relationships between the drivers' message reading time and the above causal factors. Driving simulator experiments were conducted to obtain drivers' message reading time with respect to the amount of VMS messages, drivers' travel speed, and different geometric conditions. Regression modeling techniques were applied to develop an estimation model for drivers' message reading time. Probabilistic outcomes of the proposed model would be greatly utilized to design proper VMS message phase and duration.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.2
• /
• pp.167-173
• /
• 2018

Each municipality is promoting signboard improvement projects, but the effectiveness is not great. The main reason for this is that when the signboard is manufactured the location of the shop is only dependent on the visual aspiration effect and it is not harmonized with the building by applying uniform design. The signboard are installed almost everywhere in the city, such as residential, natural and commercial environments. And the signboard provides various services such as traffic information and life safety to customers. Also, by applying design and functional elements, we can enhance the competitiveness of companies and improve the urban environment by enhancing the mutual connection effect of customers and space. The purpose of this study is to investigate the effect of design elements and functional elements of the signboard on customer preference. In other words, we conducted surveys and analyzes of 152 specialists and non-experts (customers, self-employed). As a result of the study, the following conclusions were drawn. First, the functions and design elements of signboards are important factors that have a positive effect on customer preference. Second, the function of the signboard has a positive(+) influence on the customer preference, and the information providing function and the corporate image side function directly affect the customer preference. Third, color elements have a positive(+) meaningful effect on customer preference. Especially, similar color sign affects customer preference positively. Fourth, the signboard design component has a positive(+) significant effect on customer preference. In particular, typefaces have a positive effect on customer preference.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.4
• /
• pp.205-212
• /
• 2009

Intelligent Transport Systems(ITS) has been currently growing attention in industry as hightech traffic system and ITS infrastructure has been built not only on expressway but also on national highways. Although the effect of ITS installation on national highways is not easy to measure with quantitative methodology, it is necessary to develop the quantitative method to verify the effect accurate analysis of ITS effect. In this study, the analysis of cost efficiency of ITS project carried out by Iksan Regional Constriction Management Administration(IRCMA) was conducted. Analysis period and discount rate were assumed as 10 years and 5.5%, respectively. Several measures of the effect including reduction of travel time, CO2 discharged and fuel and the value of Variable Message Sign(VMS) information were proposed. Concludingly, ITS project implemented by IRCMA appeared to be cost effective, indicating 1.20 of B/C ratio, 12.4% of IRR and W1.48 billion of NPV.

• Elastomers and Composites
• /
• v.46 no.4
• /
• pp.284-289
• /
• 2011

Prismatic reflective sheets were prepared using microprisms, and their retroreflection and structural properties were investigated and compared with encapsulated lens type reflective sheets based on glass beads. As prepared, the prismatic reflective sheets show well arranged array of microprisms. The arrangement of glass beads in encapsulated lens type reflective sheets is also found to be uniform without any cracks. However, during the coating process of the PET layer, the beads are coming out and the gaps are formed due to the application of high pressure. Even though the preparation method for reflective sheets based on microprisms is similar to that of reflective sheets based on glass beads, the method is relatively simple and cost effective, and also needs less time. Prismatic reflective sheets show higher coefficient of retroreflection from all entrance angles compared to reflective sheets based on glass beads. The results prove that the prismatic reflective sheets can be used for preparing the traffic sign boards to secure a clear view.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.4
• /
• pp.1-13
• /
• 2009

VMS(Variable Message Sign) which makes the traffic flow smooth by providing traffic information to road users in real-time has been being installed or operated on the road as part of the detailed ITS system. However, some problems were found as a result of survey on express way currently. In the part of the phase operation, the message interpretation time wasn't defined so that the phase operation was difficult. In the part of the information service, not considering characteristic of the VMS section caused the confusion to drivers. In the part of the message exposure, font, alignment, conversion and composition of the information were not consistent and use of superfluous words and inconsistent use of word having the same meaning brought about the problem on information communication This study established the detailed exposure method based on instructions relative to VMS operation. The method established by defining the number of appropriate phase and setting required function of each individual VMS installation location. The method is as follow. the font type is the GULIM, the message conversion method is simple conversion method, the alignment method is centering alignment method and the color is defined according to each situation. In this study, the preference survey was performed to review the validity of the proposed improvement through the common driver. The results were similar with the pre-study except for the font type. This study established the detailed exposure method based on instructions relative to VMS operation. The method established by defining the number of appropriate phase and setting required function of individual VMS installation location. For the evaluation of status and improvement, preference survey of ordinary drivers and statistics analysis was carried.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.160-174
• /
• 2023

LiDAR plays a key role in autonomous vehicles, and to improve its visibility, it is necessary to improve its performance and the detection objects. Accordingly, this study proposes a shape for traffic safety signs that is advantageous for self-driving vehicles to recognize. Improvement plans are also proposed using a shape-recognition algorithm based on point cloud data collected through LiDAR sensors. For the experiment, a DBSCAN-based road-sign recognition and classification algorithm, which is commonly used in point cloud research, was developed, and a 32ch LiDAR was used in an actual road environment to conduct recognition performance tests for 5 types of road signs. As a result of the study, it was possible to detect a smaller number of point clouds with a regular triangle or rectangular shape that has vertical asymmetry than a square or circle. The results showed a high classification accuracy of 83% or more. In addition, when the size of the square mark was enlarged by 1.5 times, it was possible to classify it as a square despite an increase in the measurement distance. These results are expected to be used to improve dedicated roads and traffic safety facilities for sensors in the future autonomous driving era and to develop new facilities.

• Sleep Medicine and Psychophysiology
• /
• v.8 no.1
• /
• pp.45-51
• /
• 2001

Objectives: The experience of traffic accident is a kind of the psychosocial stressors to person. The traffic accident-related patients may show the psychophysiologic hyperarousal. So we examined the differences of psychophysiologic response between patients with and without the memory of experienceing a traffic accident. Methods: Twenty-four traffic accident-related patients were divided into two groups according to ther memory of a traffic accident. In psychological assessment, levels of anxiety and depression were evaluated by State-Trait Anxiety Inventory, Beck's Depression Inventory, and Hamilton Rating Scales For Anxiety and Depression. Heart rate, electrodermal response (EDR), and electromyographic activity (EMG) were measured by biofeedback system, and systolic and diastolic blood pressure by automated vital sign monitor during baseline, task, and rest periods. We utilized script-driven imagery technique as a stressful task. The patients listened to the script describing their own traffic accident experience and were instructed to imagine the event during the task period. Statistically analytic data were obtained from the differences of psychological and psychophysiologic data between two groups. Results: The memory group did not show significantly higher EDR than the none memory group, but showed higher tendency during baseline, imagery, and rest periods. The memory group showed significantly lower EMG than the none memory group during rest period. However, there were no differences in other psychophysiologic reponses between the two groups. Conclusion: Our results showed that the memory group had higher tendency in autonomic arousal level such as electrodermal response than the none memory group. We suggest that physicians need to minimize repetitive imagery of traffic accident (reexperience), and decrease the autonomic hyperarousal in the treatment of traffic accident-related patients.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.61-72
• /
• 2011

In the benefits of ITS, there are intangible gains from real-time traffic information as well as classical gains such as travel time saving. These intangible gains are difficult to be estimated by existing transportation investment appraisal commonly used in SOC investment. The major reason is not because of the absence of methodology but because of the absence of generalized values of particular benefits from real time traffic information. This research explores the value of real-time traffic information on VMS that is the most representative of ITS services, by using CVM with Double Bounded Dichotomous Choice Question. Willingness-To-Pay (WTP) functions of drivers are built with survival functions using various types of probability distribution functions such as Exponential, Log-logistic, and Weibull functions. The results reveal that Log-logistic distribution is the most appropriate distribution model to estimate WTP, and the estimated coefficients are stable through LR (Likelihood Ratio) test. For the further study, it is recommended to perform statistical tests of temporal and spatial transferability that is not examined in this research due to the lack of data.