• Geomechanics and Engineering
• /
• 제11권5호
• /
• pp.625-638
• /
• 2016

This paper presents field study and numerical modeling results for a single-cell low-fill concrete box culvert under a flexible pavement subjected to traffic loading. The culvert in the field test was instrumented with displacement transducers to capture the deformations resulting from different combinations of static and traffic loads. A low-boy truck with a known axle configuration and loads was used to apply seven static load combinations and traffic loads at different speeds. Deflections under the culvert roof were measured during loading. Soil and pavement samples were obtained by drilling operation on the test site. The properties of the soil and pavement layers were determined in the laboratory. A 3-D numerical model of the culvert was developed using a finite difference program FLAC3D. Linear elastic models were used for the pavement layers and soil. The numerical results with the material properties determined in the laboratory were compared with the field test results. The observed deflections in the field test were generally smaller under moving loads than static loads. The maximum deflections measured during the static and traffic loads were 0.6 mm and 0.41 mm respectively. The deflections computed by the numerical method were in good agreement with those observed in the field test. The deflection profiles obtained from the field test and the numerical simulation suggest that the traffic load acted more like a concentrated load distributed over a limited area on the culvert. Elastic models for culverts, pavement layers, and surrounding soil are appropriate for numerical modeling of box culverts under loading for load rating purposes.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.349-352
• /
• 2001

In this paper, the design of WDM network using the traffic estimation modeling is implemented. Because of the lack of data of real traffic volumes, the information of statistic data is used. Using the modeling results, the WDM channels are assinged for each node, and the network is simulated using OPNET simulation tools. Here, we investigate the shortest routing scheme using OPNET simulation tools. As a result the realistic WDM network design for Korea topology is proposed.

• Journal of Communications and Networks
• /
• 제7권1호
• /
• pp.54-64
• /
• 2005

This paper presents an advanced architecture for a traffic generator capable of producing ATM traffic streams according to fully general semi-Markovian stochastic models. The architecture employs a basic traffic generator platform and enhances it by adding facilities for 'driving' the cell generation process through high-level specifications. Several kinds of optimization are employed for enhancing the software's speed to match the hardware's potential and for ensuring that traffic streams corresponding to models with a wide range of parameters can be generated efficiently and reliably. The proposed traffic generation procedure is highly modular. Thus, although this paper deals with ATM traffic, the main elements of the architecture can be used equally well for generating traffic loads on other networking technologies, IP-based networks being a notable example.

• 한국융합학회논문지
• /
• 제5권1호
• /
• pp.9-15
• /
• 2014

교통사고는 다양한 요인으로 인해 발생한다. 그 중에는 교통사고가 발생할 당시의 기상상태가 있다. 기상상태에 따라 교통사고로 인해 발생하는 사망자의 비율은 차이가 있다. 교통사고로 인한 사망자의 수를 줄이려면 기상 상태에 따라 발생될 교통사고 발생 수를 예측 하는 것이 필요하다. 본 논문은 기상 상태에 따른 교통사고 발생 빈도수를 예측하는 모델링을 제안한다. 예측 모델링의 이론으로는 마코프 프로세스를 적용하였다. 제안된 모델링에 실제 데이터를 적용하여 교통사고 발생 수를 예측 하였고, 실제 발생 수와 비교하였다. 본 논문은 기상 변화에 따른 교통사고 정책수립에 도움을 줄 것이다.

• 한국소음진동공학회논문집
• /
• 제25권4호
• /
• pp.284-290
• /
• 2015

Road traffic noise is closely related with urban forms and urban components, such as population, building, traffic and land-use, etc. Hence, it is possible to minimize the noise exposure problem depending on how to plan new town or urban planning alteration. This paper provides ways to apply for urban planning in consideration of noise exposure through road traffic noise estimation for alteration of small-scale urban form. Spatial autoregressive model from the former study is used as statistical model for noise simulation. The simulation results by the spatial statistical model are compared with those by the engineering program-based modeling for 5 scenarios of small-scale urban form alteration. The error from the limitation of containing informations inside the grid cell and the difficulties of reflecting acoustic phenomena exists. Nevertheless, in the stage of preliminary design, the use of the statistical models that have been estimated well could be useful in time and economically.

• 대한교통학회지
• /
• 제14권2호
• /
• pp.119-136
• /
• 1996

The evaluation of risk level or possibility of traffic accidents is a fundamental task in reducing the dangers associated with current transportation system. However, due to the lack of data and basic researches for identifying such factors, evaluations so far have been undertaken by only the experts who can use their judgements well in this regard. Here comes the motivation this thesis to evaluate such risk level more or less in an automatic manner. The purpose of this thesis is to test the fuzzy-logic theory in evaluating the risk level of traffic accidents. In modeling the process of expert's logical inference of risk level determination, only the geometric features have been considered for the simplicity of the modeling. They are the visibility of road surface, horizontal alignment, vertical grade, diverging point, and the location of pedestrain crossing. At the same time, among some inference methods, fuzzy composition inference method has been employed as a back-bone inference mechanism. In calibration, the proposed model used four sites' data. After that, using calibrated model, six sites' risk levels have been identified. The results of the six sites' outcomes were quite similar to those of real world other than some errors caused by the enforcement of the model's output. But it seems that this kind of errors can be overcome in the future if some other factors such as driver characteristics, traffic environment, and traffic control conditions have been considered. Futhermore, the application of site's specific time series data would produce better results.

• 한국정보처리학회논문지
• /
• 제5권11호
• /
• pp.2954-2972
• /
• 1998

광대역 종합정보 통신망에서 주문형 비디오 서비스 등의 멀티미디어 서비스가 본격적으로 도입됨에 따라 압축된 비디오의 전송이 전체 통신망 트래픽의 상당 부분을 차지할 것으로 기대된다. 가변 비트율로 부호화된 비디오가 통계적 이득과 일정한 비디오 품질을 제공할 수 있는 장점 때문에 많이 사용이 될 것이다. 비디오 트래픽을 전송하기 위해서는 음성 및 데이터 보다 많은 대역폭을 요구하기 때문에 ATM 통신망에서의 적절한 자원 할당 기법의 설계를 위하여 비디오 소스의 특성화와 트래픽 모델링은 아주 중요하다. 그리고 셀 손실, 지연 및 지터 등과 같은 성능 척도를 분석하기 위하여도 적절한 통계적 소스 모델이 필요하다. 본 논문에서는 MPEG 비디오 소스에 대한 특성화와 트래픽 모델링에 대하여 분석 기술하였다. 모델들을 크게 두 가지 즉, 통계적 모델과 결정적 모델로 분류하였다. 통계적 모델에서는 AR(autoregnessive), Markov, Markov와 AR의 복합, TES, 그리고 자기유사 모델로 분류하였다. 결정적 모델에서는 $({\sigma},\;{\rho}$, 매개변수화된 모델, D-BND, Empirical Envelopes 모델로 분류하였다. 각 모델들에 대한 특성, 장점 및 단점을 분석하고, 각 모델의 복잡도에 대하여 비교 분석하였다.

• 대한교통학회지
• /
• 제29권3호
• /
• pp.93-101
• /
• 2011

우리나라의 교통사고 발생현황은 2008년 기준 215,822건으로 예년에 비하여 소폭 감소하는 추세이나 주요 선진국에 비해서는 여전히 높은 수준이다. 그 중 단속류 시설에서 발생하는 사고는 보행자들이 직접적으로 차량에 노출되어 차대사람 사고의 비율이 높아 심각한 결과를 유발하기 때문에 이를 방지하기 위한 추가적인 고려가 필요하다. 이에 교통사고의 유형별로 영향을 미치는 인자를 분석하였다. 단속류 시설에서 교통사고는 크게 차대차 사고와 차대 사람 사고로 그 성격과 특성이 구분될 수 있다. 따라서 교통사고 유형을 크게 두가지로 구분하고, 2005년부터 2007년까지 서대문구에서 발생한 교통사고 자료 분석을 통해 교통사고의 심각도와 외생적 변수들간의 관계를 추정하였다. 본 연구에서는 단속류 시설에서 교통사고 유형별 요인을 구조방정식모형(SEM : Structural Equation Modeling)을 이용하여 도출해내고, 모형을 구축하여 유형별로 사고의 주요인들을 파악하여 비교하였다. 최종 모형에서 도출된 결론은 차대차 사고에서는 도로 요인이, 차대사람 사고에서는 환경 요인이 크게 영향을 미치고 있는 것으로 분석되었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권2호
• /
• pp.841-854
• /
• 2020

The paper explains the method to process, analyze and predict traffic patterns in Los Angeles county using Big Data and Machine Learning. The dataset is used from a popular navigating platform in the USA, which tracks information on the road using connected users' devices and also collects reports shared by the users through the app. The dataset mainly consists of information about traffic jams and traffic incidents reported by users, such as road closure, hazards, accidents. The major contribution of this paper is to give a clear view of how the large-scale road traffic data can be stored and processed using the Big Data system - Hadoop and its ecosystem (Hive). In addition, analysis is explained with the help of visuals using Business Intelligence and prediction with classification machine learning model on the sampled traffic data is presented using Azure ML. The process of modeling, as well as results, are interpreted using metrics: accuracy, precision and recall.

• 한국도로학회논문집
• /
• 제19권4호
• /
• pp.53-59
• /
• 2017

PURPOSES : This study deals with traffic accidents involving trucks. The objective of this study is to develop a traffic accident model for trucks at roundabouts. METHODS : To achieve its objective, this study gives particular attention to develop appropriate models using Poisson and negative binomial regression models. Traffic accident data from 2007 to 2014 were collected from TAAS data set of road traffic authority. Thirteen explanatory variables such as geometry and traffic volume were used. RESULTS : The main results can be summarized as follows: (1) two statistically significant Poisson models (${\rho}^2=0.398$ and 0.435) were developed, and (2) the analysis revealed the common variables to be traffic volume, number of exit lanes, speed breakers, and truck apron width. CONCLUSIONS : Our modeling reveals that increasing the number of speed breakers and speed limit signs, and widening the truck apron width are important for reducing the number of truck accidents at roundabouts.