• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.241-246
• /
• 2010

This study is to estimate the link travel time of road networks in urban areas utilizing traffic information which is collected throughout the operation of Bus Information System (BIS). BIS, which applies the hightech information technology to an existing bus system, has been developing and operating in many bodies including the local self-government entities. However, a study to consider the technology trend is relatively rare. Even though some useful traffic informations have been collected throughout the operation of an existing BIS, which set limits to the development of a future service of integrated analysis. Accordingly, in this study, a fundamental research is performed for traffic controls in urban areas and providing a traffic information for driver throughout the estimation of link travel time of road networks. The study is proceeded throughout the data collected from the operation of BIS (Bus Information System). The result showed that the patterns of going through traffic were divided up to 2 in the bus travel time in BIS then estimate two link travel time.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.4
• /
• pp.207-212
• /
• 2015

Wi-Fi Direct allows battery powered mobile devices to form a wireless ad hoc network. Since one member of the network called Group Owner (GO) takes the role of managing the network, the network lifetime is mainly affected by the energy efficiency of GO. Hence, Wi-Fi Direct defines power saving schemes that allow GO to save the energy by turning off its radio interface during the periods called absence periods. However, the Wi-Fi Direct specification does not specify how to set parameters (denoted by PS parameters) determining the schedule of the absence periods. In this paper, we therefore propose a novel traffic-aware power saving scheme for Wi-Fi Direct networks. In particular, the proposed scheme estimates the application-level traffic load and adaptively tunes the PS parameters according to the estimated value.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.988-993
• /
• 2002

The AVT under traffic-induced vibrations was carried out on Namhae suspension bridge in Korea. Mode shapes as well as natural frequencies up to the 15th mode were acquired exactly, and the effect of traffic mass and temperature on measured natural frequencies was investigated. The results from the AVT are compared with those from forced vibration test(FVT) and FE analysis. In the case of long span suspension bridges such as Namhae bridge which has relatively large mass, the results shows that the measured natural frequencies are not affected by vehicle mass. From the results of long-term variation of natural frequencies due to temperature change, it can be said that temperature effect may be predominant to structural demage effect. Therefore, if damage detection methods based on dynamic characteristics of bridges are to be used, the variation should be taken into consideration.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.59-67
• /
• 2004

On January 1, 2003, the motor vehicle management system in Korea was transformed from government's vehicle type approval to manufacturer's self-certification. The motor vehicle recall system with self-certification is an essential mechanism to place the liability of the vehicle defects on manufacturers and hence protect consumers from automobile accidents. This study provides a methodology to measure the benefits of motor vehicle recall system in two categories: benefits of reduction in traffic accidents and benefits of severity reduction in traffic accident. Applying the proposed methodology, the benefits of implementing motor vehicle recall system in Korea were estimated. It was estimated that 745 traffic accidents, 12 fatal accidents, and 1473 injury accidents were respectively reduced in 2002 due to implementation of motor vehicle recall system.

• Journal of Internet Computing and Services
• /
• v.2 no.3
• /
• pp.9-17
• /
• 2001

Ad-Hoc networks consist of a set of mobile hosts that communicate using wireless links, without the use of other communicate support facilities (such as base stations). The topology of an Ad-Hoc network changes due to the movement of mobile host. which may lead to sudden packet loss. Recently, a large amount of research has focused on the routing protocols needed in such an environment. but researches about Internet traffic performance analysis were unexhausted. Accordingly, we have simulated Ad-Hoc mobile network that using AODV routing protocol and Ad-Hoc mobile network topology size and node speed as simulation estimation-factor to analysis traffic performance. As the result of the simulation, we identify that TCP /Reno was more sensitive than TCP/Sack about node speed and a number of the node.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.948-951
• /
• 2014

Road traffic noise is closely related with urban forms and urban components, such as population, building, traffic and land-use, etc. Hence, it is possible to minimize the noise exposure problem depending on how to plan new town or urban planning alteration. This paper provides ways to apply for urban planning in consideration of noise through exposed noise estimation for urban planning alteration. Spatial autoregressive model which explains about 81.4% of road traffic noise from the former paper is used. The simulation results by the spatial statistical model are compared with those by the engineering program-based modeling for 5 small-scaled scenarios of urban planning alteration. The error from the limitation of containing informations inside the grid cell and the difficulties of reflecting acoustic phenomena is existed. Nevertheless, in the stage of preliminary design, the use of the statistical models that have been estimated well is useful in time and economically.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.1-8
• /
• 2006

Network measurement is a vital part of network traffic engineering. In a network, the metric 'capacity' characterizes the maximum throughput the path can provide when there is no traffic load, or the minimum transmission rate among all links in a path. Pathrate is one of the most widely used network capacity measurement tools nowadays. It's famous for its accurate estimation result and non restriction of the temporal network traffic condition. After several years of development, its performance becomes more stable and reliable. Extant local modes detection algorithm in pathrate is based on statistic methodology histogram. This paper suggests a new algorithm for local modes detection based on ASH (Averaged Shifted Histogram). We have implemented this algorithm and will prove it can accomplish the same task as the original one with a better result.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.3
• /
• pp.123-130
• /
• 2008

To avoid some protection systems such as firewall, P2P applications have recently used to apply dynamic port numbers. Reliable estimates of P2P traffic require examination of packet payload, a methodological land mine from legal, privacy technical, logistic, and fiscal perspectives. Indeed, access to user payload is often rendered impossible by one of these factors, inhibiting trustworthy estimation of P2P growth and dynamics. Despite various methods such as port-based and signature-based techniques, it still dose not satisfy the method which uses both qualitative and quantitative aspects. In this paper, a method using SVM mechanism which discriminate the P2P traffic from non-P2P traffics using differences between P2P and other application traffics is suggested. This is a systematic methodology to identify P2P networks, and without relying on packet payload.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.87-92
• /
• 2001

In automobile highway tunnels, in order to maintain a suitable environment for drivers and traffic, visibility in the tunnel must be maintained, and the concentrations of poisonous substances including carbon monoxide must be kept at or below allowable levels. For this reason, in long tunnels and tunnels with heavy traffic, ventilation facilities are installed. When the ventilation facilities are run at full capacity, the environment in the tunnel is obviously adequately maintained, but this consumes a great deal of electric power. Consequently, a central problem in highway tunnel ventilation control systems is to keep the pollution concentration at or below the allowable level, and thus provide a safe environment for traffic, while consuming as little electricity as possible. This paper introduces an operation method of longitudinal flow ventilation systems with jet-fan, dust collector and vertical ducts.

• Journal of Environmental Impact Assessment
• /
• v.14 no.1
• /
• pp.25-36
• /
• 2005

Actually, prediction formula of road traffic noise for EIA(Environmental Impact Assessment) has been used that proposed by National Institute of Environmental Research in 1999. The prediction formula, however, was calculated predicted noise level according to noise level producing on first floor, then needs to correct noise level at each floor in the case of apartment building. The investigation was carried out to calculate the correction coefficient for commonly using in EIA of large scaled apartment development areas. The noised level at each floor were measured from August 2001 to March 2002 at 31 investigation points of large scaled apartment development area in national wide. Measured data were divided and treated with 4 types as 3th floor, 5th floor, 7th floor and 10th floor and then the correction coefficients of each floor were calculated using by correlation formula according to each floor.