• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.53-63
• /
• 2003

The Origin-Destination(OD) matrix is very important in describing transport movements in a region. The OD matrix can be estimated using traffic counts on links in the transport network and other available information. This information on the travel is often contained in a target OD matrix and traffic counts in links. To estimate an OD matrix from traffic counts, they are the major input data which obviously affects the accuracy of the OD matrix estimated, Generally, the quality of an estimated OD matrix depends much on the reliability of the input data, and the number and locations of traffic counting points in the network. Any Process regarding the traffic counts such as the amount and their location has to be carefully studied. The objective of this study is to select of the optimal location of traffic counting points for the OD matrix estimation. The model was tested in nationwide network. The network consists of 224 zones, 3,125 nodes and 6,725 links except to inner city road links. The OD matrix applied for selection of traffic counting points was estimated to 3-constrained entropy maximizing model. The results of this study follow that : the selected alternative to the best optimal counting points of six alternatives is the alternative using common links of OD matrix and vehicle-km and traffic density(13.0% of 6,725 links), however the worst alternative is alternative of all available traffic counting points(44.9% of 6,725 links) in the network. Finally, it should be concluded that the accuracy of reproduced OD matrix using traffic counts related much to the number of traffic counting points and locations.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.117-125
• /
• 2016

PURPOSES : The density in uninterrupted traffic flow facilities plays an important role in representing the current status of traffic flow. For example, the density is used for the primary measures of effectiveness in the capacity analysis for freeway facilities. Therefore, the estimation of density has been a long and tough task for traffic engineers for a long time. This study was initiated to evaluate the performance of density values that were estimated using VDS data and two traditional methods, including a method using traffic flow theory and another method using occupancy by comparing the density values estimated using vehicular trajectory data generated from a radar detector. METHODS : In this study, a radar detector which can generate very accurate vehicular trajectory within the range of 250 m on the Joongbu expressway near to Dongseoul tollgate, where two VDS were already installed. The first task was to estimate densities using different data and methods. Thus, the density values were estimated using two traditional methods and the VDS data on the Joongbu expressway. The density values were compared with those estimated using the vehicular trajectory data in order to evaluate the quality of density estimation. Then, the relationship between the space mean speed and density were drawn using two sets of densities and speeds based on the VDS data and one set of those using the radar detector data. CONCLUSIONS : As a result, the three sets of density showed minor differences when the density values were under 20 vehicles per km per lane. However, as the density values become greater than 20 vehicles per km per lane, the three methods showed a significant difference among on another. The density using the vehicular trajectory data showed the lowest values in general. Based on the in-depth study, it was found out that the space mean speed plays a critical role in the calculation of density. The speed estimated from the VDS data was higher than that from the radar detector. In order to validate the difference in the speed data, the traffic flow models using the relationships between the space mean speed and the density were carefully examined in this study. Conclusively, the traffic flow models generated using the radar data seems to be more realistic.

• Journal of Korean Society of Transportation
• /
• v.17 no.3
• /
• pp.97-116
• /
• 1999

The growing demand for the real time traffic information is bringing about the category and number of traffic collection mechanism in the era of ITS. There are, however, two problems in making data into information using various traffic data. First, the information making process of making data into the representative information, for each traffic collection mechanism, for the specified analysis periods is required. Second, the integration process of fusing each representative information into "the information" for each link out of each source is also required. That is, both data reduction and/or data to information process and information fusion are required. This article is focusing on the development of information fusing algorithm based on voting technique, fuzzy regression, and, Bayesian pooling technique for estimating the dynamic link travel time of networks. The proposed algorithm has been validated using the field experiment data out of GPS probes and detectors over the roadways and the estimated link travel time from the algorithm is proved to be more useful than the mere arithmetic mean from each traffic source.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2003.11a
• /
• pp.89-93
• /
• 2003

The ambient noise in modem society is the factor to give people serious influence. Noise barriers installation is mostly used in the apartment estate to protect countermeasure about the road traffic ambient noise. The purpose of this study is to suggest reference data fur design of traffic noise reduction in apartment estate. It finds out how the traffic noise is measured about a noise barriers and physical characteristics. The 57dB was measured from the noise barriers in a 2m point. An ambient noise's of the part to belong noise attenuation is big at the sound arresting area of the noise barriers as the distance far.

• Journal of Korea Multimedia Society
• /
• v.11 no.12
• /
• pp.1706-1715
• /
• 2008

In a super-peer based P2P network, the network is clustered and each cluster is managed by a special peer, which is called a super-peer. A Super-peer has information of all the peers in its cluster. This type of clustered P2P model is known to have efficient information search and less traffic load than unclustered P2P model. In this paper, we compute the message traffic cost incurred by peers' query, join and update actions within a cluster as well as between the clusters. With these values, we estimate the optimal number of super-peers that minimizes the traffic cost for the various size of super-peer based P2P networks.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.294-298
• /
• 2015

In the United States, the completion of Construction Work Zone (CWZ) impact assessments for all federally-funded highway infrastructure improvement projects is mandated, yet it is regarded as a daunting task for state transportation agencies, due to a lack of standardized analytical methods for developing sounder Transportation Management Plans (TMPs). To circumvent these issues, this study aims to create a spatiotemporal modeling framework, dubbed "SWAT" (Spatiotemporal Work zone Assessment for TMPs). This study drew a total of 43,795 traffic sensor reading data collected from heavily trafficked highways in U.S. metropolitan areas. A multilevel-cluster-driven analysis characterized traffic patterns, while being verified using a measurement system analysis. An artificial neural networks model was created to predict potential 24/7 traffic demand automatically, and its predictive power was statistically validated. It is proposed that the predicted traffic patterns will be then incorporated into a what-if scenario analysis that evaluates the impact of numerous alternative construction plans. This study will yield a breakthrough in automating CWZ impact assessments with the first view of a systematic estimation method.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1709-1712
• /
• 2002

In the microcell- or picocell-based system the frequent movements of the mobile bring about excessive traffics into the networks. A mobile location estimation mechanism can facilitate both efficient resource allocation and better QoS provisioning through handoff optimization. Existing location estimation schemes consider only LOS model and have poor performance in presence of multi- path and shadowing. In this paper we study a novel scheme which can increase estimation accuracy by considering NLOS environment

• Management Science and Financial Engineering
• /
• v.15 no.1
• /
• pp.51-69
• /
• 2009

A network model and a Genetic Algorithm (GA) is proposed to solve the simultaneous estimation of the trip distribution and traffic assignment from traffic counts in the congested networks in a logit-based Stochastic User Equilibrium (SUE). The model is formulated as a problem of minimizing a non-linear objective function with the linear constraints. In the model, the flow-conservation constraints are utilized to restrict the solution space and to force the link flows become consistent to the traffic counts. The objective of the model is to minimize the discrepancies between two sets of link flows. One is the set of link flows satisfying the constraints of flow-conservation, trip production from origin, trip attraction to destination and traffic counts at observed links. The other is the set of link flows those are estimated through the trip distribution and traffic assignment using the path flow estimator in the logit-based SUE. In the proposed GA, a chromosome is defined as a real vector representing a set of Origin-Destination Matrix (ODM), link flows and route-choice dispersion coefficient. Each chromosome is evaluated by the corresponding discrepancies. The population of the chromosome is evolved by the concurrent simplex crossover and random mutation. To maintain the feasibility of solutions, a bounded vector shipment technique is used during the crossover and mutation.

• Journal of Korean Society of Transportation
• /
• v.35 no.1
• /
• pp.63-78
• /
• 2017

The purpose of this study is to determine the optimal aggregation interval to increase the reliability when estimating representative value of individual vehicle travel time collected by DSRC equipment in interrupted traffic flow section in National Highway. For this, we use the bimodal asymmetric distribution data, which is the distribution of the most representative individual vehicle travel time collected in the interrupted traffic flow section, and estimate the MSE(Mean Square Error) according to the variation of the aggregation interval of individual vehicle travel time, and determine the optimal aggregation interval. The estimation equation for the MSE estimation utilizes the maximum estimation error equation of t-distribution that can be used in asymmetric distribution. For the analysis of optimal aggregation interval size, the aggregation interval size of individual vehicle travel time was only 3 minutes or more apart from the aggregation interval size of 1-2 minutes in which the collection of data was normally lost due to the signal stop in the interrupted traffic flow section. The aggregation interval that causes the missing part in the data collection causes another error in the missing data correction process and is excluded. As a result, the optimal aggregation interval for the minimum MSE was 3~5 minutes. Considering both the efficiency of the system operation and the improvement of the reliability of calculation of the travel time, it is effective to operate the basic aggregation interval as 5 minutes as usual and to reduce the aggregation interval to 3 minutes in case of congestion.

• Journal of Korean Society of Transportation
• /
• v.20 no.6
• /
• pp.59-68
• /
• 2002

AADT(Annual Average Daily Traffic) can be obtained by using short-term counted traffic data rather than using traffic data collected for 365 days. The process is a very important in estimating AADT using short-term traffic count data. Therefore, There have been many studies about estimating AADT. In this Paper, we tried to improve the process of the AADT estimation based on the former AADT estimation researches. Firstly, we found the factor showing differences among groups. To do so, we examined hourly variables(divided to total hours, weekday hours. Saturday hours, Sunday hours, weekday and Sunday hours, and weekday and Saturday hours) every time changing the number of groups. After all, we selected the hourly variables of Sunday and weekday as the factor showing differences among groups. Secondly, we classified 200 locations into 10 groups through cluster analysis using only monthly variables. The nile of deciding the number of groups is maximizing deviation among hourly variables of each group. Thirdly, we classified 200 locations which had been used in the second step into the 10 groups by applying statistical techniques such as Discriminant analysis and Neural network. This step is for testing the rate of distinguish between the right group including each location and a wrong one. In conclusion, the result of this study's method was closer to real AADT value than that of the former method. and this study significantly contributes to improve the method of AADT estimation.