• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.879-888
• /
• 2000

In this paper, the performance of IS-95B CDMA system adopting multi-code scheme for data service on the forward link is obtained by theoretical analysis and computer simulation. The wireless channel is assumed to include AWGN, MUI(Multi-User Interference), and MPI(Multi-Path Interference), and multipath Rayleigh fading modeled by TDL(Tapped Delay Line). To obtain actual performance, IS-95B system using PN codes(M-sequence) concatenated with Walsh codes is considered. The BER performance of voice/data service satisfying QoS requirement and the maximum capacity of voice users is derived in terms of various system parameters(voice activity factor, required SNR of voice/data users, the number of multi-codes, the number of voice/data users.,etc.). As a result, under the condition that the maximum allowable number of voice user is 38 in voice only system, as the number of multi-code is decreased by 1, the maximum allowable number of voice user is increased by 5% for system with 1 data user and 22.3% for system with 4 data users. Therefore, it is possible to increase maximum allowable number of users in IS-95B CDMA system by appropriate control of the number of multi-codes and required SNR according to channel environment and traffic characteristic.

• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.73-84
• /
• 2001

Korean Highway Capacity Manual applies 7 adjustment factors to estimate saturation flows at signalized intersections. Among the adjustment factors, the right-turn adjustment factor uses equation hard to understand and requires complicated computing process comparing other adjustment factors. Thus. this study was conducted in order to suggest a new technique of estimating the right-turn adjustment factor which is easy to understand and simple to computer by having reasonable degree of accuracy. In this study the right-turn saturation flow ratios which are important in estimating the factor are suggested and the equation to estimate the volume of right-turn on red signal(RTOR) is developed based on observed data. The right-turn saturation flow rates can be estimated according to turning radius and number of lanes of crossing road dividing right-turn lanes into canalized and uncanalized lanes. The RTOR volume is estimated using the proportion of the time during which RTOR is possible to the whole time of red signal according to the through traffic volume per lane of the approach at signalized intersections. The technique of estimating the right-turn adjustment factor suggested in this study, which follows the HCM2000 of U.S. in principal, first judges the right-turn lane to be used exclusively for right-turn or not by employing the RTOR factor and the judging equation developed in this study. Next, if the right-turn lane is not exclusive right-turn lane, the shared right-turn lane is classified into single lane approach or multi lane approach. Thus, a total of three methods of estimating the right-turn adjustment factor to the three cases are suggested in this study.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.539-542
• /
• 2002

Crack sealing is a maintenance procedure that is commonly used to reduce pavement degradation. If cracks in pavements are not sealed, surface water penetration can reduce the strength of the sub-base layers, which can result in increased deflections of the pavement. Reduced strength of the sub-base also accelerates the deterioration of the surface, due to development of greater cracking and potholes. Crack sealing is performed to reduce water and debris penetration, thereby helping to maintain pavement structural capacity and limiting future degradation. The process of sealing cracks in pavements is however dangerous, costly, and labor-intensive operation. Labor turnover and training are increasing problems related to crack sealing crews, and as traffic volumes increase. Automating crack sealing can reduce labor and road user costs, improve work quality, and decrease worker exposure to roadway hazards. The main objective of this research is to develop an automated system for sealing cracks in pavement. Extension of the algorithms and tools presented in this research is also recommended for future study.

• The KIPS Transactions:PartD
• /
• v.8D no.2
• /
• pp.132-144
• /
• 2001

The broadcast environment is asymmetric communication aspect that is typically much greater communication capacity available from server to clients than in the opposite direction. In addition, most of mobile computing systems only allow the generation of read-only transactions from mobile clients for retrieving different types of information such as stock data, traffic information and news updates. Since previous concurrency control protocols, however, do not consider such a particular characteristics, the performance degradation occurs when those schemes are applied to the broadcast environment having quite a high data contention. In this paper, we propose OCC/2VTS (Optimistic Concurrency Control based on 2-Version and TimeStamp) that is most appropriate for broadcast environment. OCC/2VTS lets each client process and commit query transactions for itself by using two version data in cache. If the values of appropriate data items are not changed twice by invalidation report after a query transaction starts, the query transaction is committed safely independent of commitment of update transactions. OCC/2VTS decreases the number of informing server for the purpose of commitment. Due to broadcasting the validation reports including updated recent values, it reduces the opportunity of requesting a recent data values of server as well. As a result, OCC/2VTS makes full use of the asymmetric bandwidth. It also improves transaction throughput by increasing the query transaction commit ratio as much as possible.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.749-762
• /
• 2019

In recent years, in urban areas, underground of roads are being promoted in order to resolve traffic congestion and to secure green spaces, and due to the low ratio of large vehicles, they are planned or constructed as road tunnels for small cars only. In addition, the tunnels being built in the city is a tendency to be enlarged to play the role of main roads. Accordingly, the capacity of the ventilation system is increasing and various ventilation methods are required, and the importance of maintenance after the completion of the tunnel such as the operating cost of the ventilation system is emphasized. Therefore, the need for optimization of the operation stage for reducing the power consumption of the ventilation system and the study of the ventilation system operation control logic is increasing. In this study, the study on the necessity of the optimization of operation stage and control logic of the ventilation system was carried out to realize the energy-saving operation for the small car only passing through tunnels which is applied of ① jet fan and combination ventilation system (② jet fan + air purifying equipment, ③ jet fan + vertical shaft, ④ jet fan + supply air semi-transverse). As a result of this study, there can be various operating combinations in the case of the combined ventilation system, and even though the amount of ventilation air is the same, the operating power varies greatly according to the operating combinations. It was found that operating the axial fan first rather than the jet fan first operation method has an effect on power saving.

• Journal of the Korean association of regional geographers
• /
• v.10 no.2
• /
• pp.447-465
• /
• 2004

This paper is to analyze citizens' consciousness on urban changes, especially focusing on changes in urban environment, spatial structure, and urban planning, of large cities in S. Korea, that is, Seoul, Daejeon, Daegu, and Kwangju in the 1990s. Some significant points can be described as follows. First. The most important factor influencing on the change of urban spatial structure was the expansion of residential area inner and outside of cities promoted by the traditional construction industry, and not development of high-tech industries and their complex or location of multi-national firms which can be emphasized as major factors of new urbanization process of global cities. Secondly, citizens seem to have experienced improvement and deterioration of urban environment simultaneously, emphasizing regulatory environmental policy on the one hand, and recognize the necessity of sustainable urban development within given environmental capacity and restoration of destructed and polluted environment of cities. Thirdly, the building boom of new apartment complex was a major driving force of changing urban spatial structure, but it could neither alleviate a residential gap between the poor and the rich areas nor a relief of traffic congestion. Finally, the urban policy in general was felt somewhat improved by citizens, but not in sectoral details.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.54-63
• /
• 2018

In this study, the stability and economic feasibility of a MSE (Mechanically stability earth) wall with a pre-cast concrete pacing panel was investigated for a standard section of highway. Based on the design criteria, the MSE walls of the panel type were designed considering the load conditions of the highway, such as the dead load of the concrete pavement, traffic load, and impact load of the barrier. The length of the ribbed metal strip was arranged at 0.9H according to the height of the MSE walls. Because the length of the reinforcement was set to 0.9H according to the height of the MSE wall, the external stability governed by the shape of the reinforced soil was not affected by the height increase. The factor of safety (FOS) for the bearing capacity was decreased drastically due to the increase in self-weight according to the height of the MSE wall. As a result of examining the internal stability according to the cohesive gravity method, the FOS of pullout was increased and the FOS of fracture was decreased. As the height of the MSEW wall increases, the horizontal earth pressure acting as an active force and the vertical earth pressure acting as a resistance force are increased together, so that the FOS of the pullout is increased. Because the long-term allowable tensile force of the ribbed metal strip is constant, the FOS of the fracture is decreased by only an increase in the horizontal earth pressure according to the height. The panel type MSE wall was more economical than the block type at all heights. Compared to the concrete retaining wall, it has excellent economic efficiency at a height of 5.0 m or more.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.737-748
• /
• 2005

Two flexible admission control schemes for integrated voice and stream-type data services are proposed in DS-CDMA systems. Most Previous studies on admission control have focused on integration of short, bursty Packet-type data services and conventional voice services. However, stream-type data services with a relatively long service holding time are expected to be a considerable portion of data traffic in future generation cellular systems. Scheme I is a basic scheme that accommodates both voice and data services with full bandwidth. However, voice services are given priority over data services using the duration difference between the holding times for these services. Scheme ll uses a different method to efficiently give priority to voice services over stream-type data services. An additional interference margin for voice services is provided by suppressing interference from stream-type data services according to voice access requests and a varying interference status. Performance of the two schemes is evaluated by developing Markovian models. Numerical results show that the voice capacity is highly sensitive to the service holding time of data services while the performance measures of data services are not highly sensitive. Scheme H is a significant improvement over Scheme I for accommodating voice and stream-type data services

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.163-174
• /
• 2008

The conventional four-step travel demand model is still widely used as the state-of-practice in most transportation planning agencies even though it does not provide reliable estimates of travel demand. In order to improve the accuracy of travel demand estimation, implementing an alternative approach would be critical as much as acquiring reliable socioeconomic and travel data. Recently, the role of travel demand model is diverse to satisfy the needs of microscopic analysis regarding various policies of travel demand management and traffic operations. In this context, the activity-based approach for travel demand estimation is introduced and a case study of developing a spatial-temporal activity presence-based approach that estimates travel demand through forecasting number of people present at certain place and time is accomplished. Results show that the spatial-temporal activity presence-based approach provides reliable estimates of both number of people present and trips actually people made. It is expected that the proposed approach will provide better estimates and be used in not only long-term transport plans but short-term transport impact studies with respect to various transport policies. Finally, in order to introduce the spatial-temporal activity presence-based approach, the data such as activity-based travel diary and land use based on geographic information system are essential.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.2
• /
• pp.45-53
• /
• 2000

In wireless environment, due to the limited capacity of radio channels it is not easy to guarantee QoS provisioning to mobile users. Therefore, one of the key problems to support broadband multimedia multi-services in wireless ATM networks is to study an effective call admission control(CAC). The purpose of this paper is to propose a distributed CAC scheme that guarantees multi QoS and multi-class service. Control parameters of the proposed scheme are QoS threshold and channel overload probability. With these parameter control, we show that the scheme can guarantee the requested QoS to both new and handover calls. In the scheme, channels are allocated dynamically, and QoS measurements are made in a distributed manner. We show that by providing variable data rate to calls it can effectively prohibit the QoS degradation even if there are severe fluctuations of network traffic. We compare the proposed CAC scheme to the well-known schemes such as guard band call admission control scheme. Through numerical examples and simulations, the proposed scheme is shown to improve the performance by lowering the probability of handover call dropping