• Journal of Navigation and Port Research
• /
• v.34 no.9
• /
• pp.699-704
• /
• 2010

Recently, the navigation risk is increasing significantly with growing of vessels' volume and propelling marine facilities, water bridges and port development etc. As a result, Ministry of Land, Transport and Maritime Affairs enacted a new law called MSA(Maritime Safety Audit) as a comprehensive maritime traffic safety management scheme in order to ensure safety improvements from the early planning stage to post managing of the development which affect the maritime traffic environment. MSA as a tool for improving maritime traffic safety is a formal safety diagnosis assessment in the existing or future ship's fairway by an independent audit institute. It examines the potential hazards of maritime traffic safety about the port development, if necessary, and is to ensure the implementation of appropriate safety measures. The primary purpose of MSA is to identify potential risk elements affecting safe navigation. This paper is aimed to introduce the backgrounds, the necessity and efficiency of MSA and also to describe some technical standards and diagnostic procedures.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.413-419
• /
• 2019

Traffic routes typically have heavy traffic. Especially, the entrance of the route has a high risk of accidents occurring because of ships entering and exiting the port. However, almost of studies have focused on the distribution of traffic on the route. Thus, studies on the distribution between ships for passing through the route are insufficient. The purpose of this study was to analysis the traffic in the Busan north port No.1 route for one week. Based on present traffic conditions, one gate line was settled on the route with an analysis of traffic conditions. Based on the analysis data, each optimal time probability distribution between ships was divided into inbound/outbound and traffic volume. An analysis of the optimal probability distribution, was applied to 31 probability distributions divided into bounded, unbounded, non-negative, and advanced probability distribution. The KS test was applied for identifying three major optimal time probability distributions. According to the KS test results, the Wakeby distribution is the best optimal time probability distribution on the designated route. Although the optimal time probability distribution for other transportation studies such as on vehicles on highways is a non-negative probability distribution, this distribution is an advanced probability distribution. Thus, the application of major probability distribution for using other transportation studies is not applicable to this study Additionally, the distance between ships in actual traffic surveys and the distance estimated by the optimal probability distribution were compared. As a result of the comparison, those distances were fairly similar. However, this study was conducted in only one major port. Thus, it is necessary to investigate the time between ships and calculate a traffic volume on varying routes in future studies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4D
• /
• pp.469-476
• /
• 2008

Recently, TOD gains popularity as a traffic solution measure of high density urban regeneration projects. The purpose of this study is to investigate traffic impacts of high density TOD projects, and to identify the issues to be resolved. For a case study, it chooses Gangnamgucheong station in Gangnam area served by two subway lines, and designates 400m radius from the station as a site for high-density development. The MOEs chosen for this study is traffic volume, time, distance, speed, and mode share. The SECOM model is adopted for traffic simulation. The analysis results show that high-density TOD is an effective tool for traffic improvement even with only one station area being implemented. It is found that the traffic volume increases near the station in nature where high-density development occurs, but it declines overall in the rest of Gangam area. The total travel time and distance of passenger vehicles decline, meaning that the traffic condition becomes better than before. With regulation on parking supply, the improvement becomes more vivid. In terms of the changes of traffic speed, both alternatives show 4.1% increase in speed, but the difference between alternatives is not quite noticeable because of the induced vehicle demand driven to the streets with improved traffic condition. The mode share changes occur for the benefit of subway ridership, because the study station is equipped with two subway line services. When mixed with parking supply restriction, the impact becomes clearer.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.11
• /
• pp.23-32
• /
• 2018

The purpose of this study is to establish a walking energy weighted ERAM model that can predict the pedestrian volume by the connection structure of the vertical and horizontal spaces within a three-dimensional building. The process of building a walking-energy weighted ERAM model is as follows. First, the spatial graph was used to reproduce three-dimensional buildings with vertical and horizontal spatial connection structures. Second, the walking energy was measured on the spatial graph. Third, ERAM model was used to apply weights with spatial connection properties in random walking environment, and the walking energy weights were applied to the ERAM model to calculate the walk energy weighted ERAM values and visualize the distribution of pedestrian flow. To verify the validation of the established model, existing and proposed spatial analysis models were compared to real space. The results of this study are as follows : The model proposed in this study showed as much elaborated estimation of pedestrian traffic flow in real space as in traditional spatial analysis models, and also it showed much higher level of forecasting pedestrian traffic flow in real space than existing models.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.409-414
• /
• 2003

In the beginning of the 21s1 century, the world has been making rapid progress and changed all over the areas. Like the rest, as all domiciliary circumstances for a local development have changed, the continuous development considered environmental view has been accounted as much compared with the high growth-oriented development based on the efficiency so far. As the volume of traffic in urban community increases, the environmental load enlarges inevitably. Particularly, the excess and deficiency problems for all sorts of traffic facilities, like the shortage of parking lots continue to happen in proportion to the increase in traffic. For a design to solve these problems, introduction of the Geographic Information System; GIS applied widely over various fields become necessary. In this research, the supply-demand situation in urban areas is observed. The application of GIS for the purpose of the improvement of parking lot management technique to control effectively facilities related to parking lot in the city brings promoting the efficiency of business data inquiry, data management data correction and so on through graphic and non-graphic database for every kind of draft data, record and register data. The graphic users interface to support effective decision-making is applied for the improvement of work in this study. This research also suggests the way to utilize common database considered linkage with sub-systems related existing urban information system by developing the parking lot management system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.6
• /
• pp.559-565
• /
• 2016

For the purpose of the research, it is analyze the influence traffic Signal Progression on a CBD by expansion of Permissive Left-Turn on the advanced traffic management system program compared with traffic response control For this, divided a average distance between intersections, a traffic network on five district in four city. As the result, Volume of the traffic management system on a advanced traffic management system program compared with traffic response control is effective in traffic signal cycle 160sec 286car per lane, in 140sec 308car, 120sec 264car. As well, for a traffic network as the length of a traffic network 2.0~3.0km, under 2.0km, all of traffic signal cycle(160sec, 140sec, 120sec) a passing band and stop is more effective. But the traffic management system on traffic response control compared with the traffic management system on a advanced traffic management system program is effective in the length of a traffic network over 5.0km. For the efficiency of traffic signal system manage, it should be runned the traffic management system on traffic response control in addition to the traffic management system on a advanced traffic management system program on CBD. As the result of simulation the business in chungju-si, the travel speed of the traffic management system on a advanced traffic management system program is 41.2km/h and the travel speed of traffic response control is 37.5km/h. Therefore, it should be runned per length of a traffic network the traffic management system on traffic response control in addition to the traffic management system on a advanced traffic management system program on CBD.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.11-18
• /
• 2015

PURPOSES : The purpose of this thesis is to evaluate the effectiveness of an active noise cancellation (ANC) system in reducing the traffic noise level against frequencies from the predictive model developed by previous research. The predictive model is based on ISO 9613-2 standards using the Noble close proximity (NCPX) method and the pass-by method. This means that the use of these standards is a powerful tool for analyzing the traffic noise level because of the strengths of these methods. Traffic noise analysis was performed based on digital signal processing (DSP) for detecting traffic noise with the pass-by method at the test site. METHODS : There are several analysis methods, which are generally divided into three different types, available to evaluate traffic noise predictive models. The first method uses the classification standard of 12 vehicle types. The second method is based on a standard of four vehicle types. The third method is founded on 5 types of vehicles, which are different from the types used by the second method. This means that the second method not only consolidates 12 vehicle types into only four types, but also that the results of the noise analysis of the total traffic volume are reflected in a comparison analysis of the three types of methods. The constant percent bandwidth (CPB) analysis was used to identify the properties of different frequencies in the frequency analysis. A-weighting was applied to the DSP and to the transformation process from analog to digital signal. The root mean squared error (RMSE) was applied to compare and evaluate the predictive model results of the three analysis methods. RESULTS : The result derived from the third method, based on the classification standard of 5 vehicle types, shows the smallest values of RMSE and max and min error. However, it does not have the reduction properties of a predictive model. To evaluate the predictive model of an ANC system, a reduction analysis of the total sound pressure level (TSPL), dB(A), was conducted. As a result, the analysis based on the third method has the smallest value of RMSE and max error. The effect of traffic noise reduction was the greatest value of the types of analysis in this research. CONCLUSIONS : From the results of the error analysis, the application method for categorizing vehicle types related to the 12-vehicle classification based on previous research is appropriate to the ANC system. However, the performance of a predictive model on an ANC system is up to a value of traffic noise reduction. By the same token, the most appropriate method that influences the maximum reduction effect is found in the third method of traffic analysis. This method has a value of traffic noise reduction of 31.28 dB(A). In conclusion, research for detecting the friction noise between a tire and the road surface for the 12 vehicle types needs to be conducted to authentically demonstrate an ANC system in the Republic of Korea.

• Journal of environmental and Sanitary engineering
• /
• v.18 no.3 s.49
• /
• pp.11-20
• /
• 2003

There are two ways of reducing air pollution. One is the approach of the pollutant source control and the other one is the traffic demand decreasing approach. This study is focusing on the approach of land use planning and optimal location of urban facilities because those are the basic cause to generate transportation demands. So, the purpose of this study would be to analyze the changes of NOx and CO distribution on environmental air by functional hierarchy of urban roads and to make evaluation model of 'Transportation-Land Use -Air Pollution'. It will contribute to improve the air pollution level at same actual traffic generation according to different location.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.69-80
• /
• 2016

Some studies were conducted for the purpose of minimizing total clearance time for rapid evacuation from the indoor spaces when disaster occurs. Most studies took a long time to calculate the optimal evacuation route that derived minimum evacuation time. For this reason, this study proposes an evacuation route assignment algorithm that can shorten the total clearance time in a short operational time. When lots of exits are in the building, this algorithm can shorten the total clearance time by assigning the appropriate pedestrian traffic volume to each exit and balances each exit-load. The graph theory and greedy algorithm were utilized to assign pedestrian traffic volume to each exit in this study. To verify this algorithm, study used a cellular automata-based evacuation simulator and experimented various occupants distribution in a building structure. As a result, the total clearance time is reduced by using this algorithm, compared to the case of evacuating occupants to the exit within shortest distance. And it was confirmed that the operation takes a short time In a large building structure.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.131-136
• /
• 2017

This study deals with the small-size roundabout accidents. The purpose of this study is to analyze the characteristics of small-size roundabout accidents from developing various types of accident models, and to discuss the improvement countermeasures by vehicle type. The geometric characteristics of 36 roundabouts are surveyed, and the traffic accident data from 2008 to 2014 are collected and classified as those of car, truck and motor cycle. In this study, dependent variable is the number of accident and independent variables are such 15 variables as geometry and traffic volume. The main results are as follows. First, the null hypotheses that the size of roundabout and type of vehicle are not related to traffic accident are rejected. Second, 8 count data models which are all statistically significant are developed. Third, the number of circulatory roadway lane and sidewalk are selected as common variables of roundabout size. Finally, the number of entry and circulatory roadway lane are selected as common variables of vehicle type.