• 제목/요약/키워드: Traffic Line

검색결과 656건 처리시간 0.055초

도로의 야간 교통사고 저감을 위한 야광형 포장노면표시 기술개발의 적용성 연구 (A Study on the Application of Glow Line Marking Technology Development for Reducing Traffic Accidents at Nighttime)

  • 이용문;김흥래;김상태
    • 한국도로학회논문집
    • /
    • 제17권3호
    • /
    • pp.59-68
    • /
    • 2015
  • PURPOSES : This study suggests the application of glow line marking technology for reducing traffic accidents at nighttime. METHODS : In this study, using a statistical analysis, we analyzed the characteristics of traffic accidents occurring at nighttime. Next, the strength, weakness, opportunity, and threat (SWOT) factors were derived based on a current-status analysis of glow line marking technology and road environments. An SO strategy, ST strategy, WO strategy, and WT strategy were established in accordance with the four SWOT factors. RESULTS : This study suggests that the following strategies should be promoted to apply glow line marking technology to a road environment: 1) an activation strategy for the technological development of glow line markings for a new paradigm in reducing traffic accidents, 2) a benefit enhancement strategy applying glow line marking technology in places where nighttime traffic accidents frequently occur, 3) a strategy for the expansion of glow line marking by replacing streetlights, and 4) a strategy for enhancing road applications through the development of various line marking methods in consideration of both performance and costs. CONCLUSIONS : The application of glow line markings in a road environment can contribute to a reduction of traffic accidents at nighttime, and aid energy savings from the replacement of streetlights.

통행배정-노선계획 통합 모형을 위한 선형 근사화 알고리듬 개발 (An Iterative Linear Approximation Algorithm for a Unified Model of Traffic Assignment and Line Planning in Railway Networks)

  • 박범환
    • 한국철도학회논문집
    • /
    • 제17권2호
    • /
    • pp.140-147
    • /
    • 2014
  • 노선 계획이란 열차종별 수요를 만족하는 최적의 열차 운행 횟수를 결정하는 단계를 말한다. 이러한 노선계획의 주요 입력자료는 통행배정 모형으로부터 산출된 열차종별 구간 통행량이다. 그러나 대부분의 통행배정 모형 또한 노선계획을 통해 구한 열차 운행 횟수 혹은 시격을 입력요소로 요구하므로, 수요예측(통행배정)-노선계획의 단계적 접근은 두 계획간의 상호 모순을 초래하여 부정확한 열차종별 수요 및 노선계획을 도출할 수 있다. 본 연구는 이 두 가지 문제를 통합적으로 고려할 수 있는 최적화 모형과 이에 대한 선형 근사해법을 제시하고, 전체 한국 철도 네트워크에 적용한 실험결과를 제시한다.

신호기위치와 정지선 준수율과의 관계 연구 (The Study on the Correlation between Traffic Signal Location and Stop Line Observance)

  • 정광복;김진태;이용택;이돈주
    • 한국도로학회논문집
    • /
    • 제9권1호
    • /
    • pp.29-38
    • /
    • 2007
  • 경찰은 2005년 정지선 준수율 향상을 위하여 '정지선 지키기 생활화 운동'과 함께 정지선위반 단속을 수행하였다. 단속기간 동안 정지선 준수율이 향상되었으나, 단속기간 이후 정지선 준수율은 단속 이전 수준으로 회귀되어 캠페인 및 단속을 통한 정지선 준수율 향상 노력의 장기적인 실효성 문제가 지적되었다. 교통안전시설물(신호기) 설치위치 조정 등의 교통환경 개선을 통해 장기적이며 근본적인 정지선 준수율 향상 필요성이 공론화 되고 있으나 해당분야의 기초 연구가 부재하다. 본 연구는 신호기 설치위치에 따른 차량의 정지선 준수율 변화 여부를 분석 및 제시한다. 현장자료를 토대로 수행한 통계분석 결과 신호기 위치에 따라 정지선 준수율이 변화하며, 정지선으로부터 신호기까지의 거리가 $10{\sim}20m$일 경우 정지선 준수율이 높아지는 것으로 분석되었다. '교통신호기설치관리매뉴얼'에서 허용하는 신호기 설치위치 범위에 포함되는 정지선 하류 $10{\sim}20m$의 위치를 신호기 적정 설치위치로 제안한다.

  • PDF

개통 3주년 이후 KTX 열차 차내 소음 특성 분석 (Opening to traffic 3 annual after KTX train interior noise quality analysis)

  • 이찬우;김재철
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.899-902
    • /
    • 2007
  • The KTX train which brings April 2004 high-speed railroad commerce operation time is operated currently Kyungbu line Seoul-Gwangmyeong-Daejeon-Dongdaegu-Pusan and Honam line Youngsan-Gwangmyeong-Seodaejeon-Kwangju/Mokpo. The high-speed railroad opening to traffic after KTX train interior noise follows in railway line quality change and it is changing together. From the research which it sees until opening to traffic after present time of the KTX vehicle it executed an interior noise quality change from Kyungbu line.

  • PDF

Development of Analysis Module for Marine Traffic Information Using PC Camera

  • Moon Serng-Bae;Lee Geun-Sil;Jun Seung-Hwan
    • 한국항해항만학회지
    • /
    • 제29권4호
    • /
    • pp.313-318
    • /
    • 2005
  • Usually marine traffic survey has been conducted by some methods like an ocular observation using portable RADAR, a questionnaire, etc. But these should have expended a lot of manpower and expenses. In this paper, we have developed new observation module which could capture the RADAR image using PC camera simply, and allowed as to track targets on the PC monitor directly. And it has been programmed to make a database of RADAR image, target's track and information, and analyze the marine traffic tendency in various ways like vessel number crossed over gate line, vessel's velocity distribution in gate line, traffic density distribution, etc. We have confirmed that this module could observe and analyze the marine traffic efficiently and economically through several on-the-spot experiments.

Performance Improvement on MPLS On-line Routing Algorithm for Dynamic Unbalanced Traffic Load

  • Sa-Ngiamsak, Wisitsak;Sombatsakulkit, Ekanun;Varakulsiripunth, Ruttikorn
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.1846-1850
    • /
    • 2005
  • This paper presents a constrained-based routing (CBR) algorithm called, Dynamic Possible Path per Link (D-PPL) routing algorithm, for MultiProtocol Label Switching (MPLS) networks. In MPLS on-line routing, future traffics are unknown and network resource is limited. Therefore many routing algorithms such as Minimum Hop Algorithm (MHA), Widest Shortest Path (WSP), Dynamic Link Weight (DLW), Minimum Interference Routing Algorithm (MIRA), Profiled-Based Routing (PBR), Possible Path per Link (PPL) and Residual bandwidth integrated - Possible Path per Link (R-PPL) are proposed in order to improve network throughput and reduce rejection probability. MIRA is the first algorithm that introduces interference level avoidance between source-destination node pairs by integrating topology information or address of source-destination node pairs into the routing calculation. From its results, MIRA improves lower rejection probability performance. Nevertheless, MIRA suffer from its high routing complexity which could be considered as NP-Complete problem. In PBR, complexity of on-line routing is reduced comparing to those of MIRA, because link weights are off-line calculated by statistical profile of history traffics. However, because of dynamic of traffic nature, PBR maybe unsuitable for MPLS on-line routing. Also, both PPL and R-PPL routing algorithm we formerly proposed, are algorithms that achieve reduction of interference level among source-destination node pairs, rejection probability and routing complexity. Again, those previously proposed algorithms do not take into account the dynamic nature of traffic load. In fact, future traffics are unknown, but, amount of previous traffic over link can be measured. Therefore, this is the motivation of our proposed algorithm, the D-PPL. The D-PPL algorithm is improved based on the R-PPL routing algorithm by integrating traffic-per-link parameters. The parameters are periodically updated and are dynamically changed depended on current incoming traffic. The D-PPL tries to reserve residual bandwidth to service future request by avoid routing through those high traffic-per-link parameters. We have developed extensive MATLAB simulator to evaluate performance of the D-PPL. From simulation results, the D-PPL improves performance of MPLS on-line routing in terms of rejection probability and total throughput.

  • PDF

실동하중에 의한 강판형교의 교통하중 분포 (The Distribution of the Normal Traffic Loads on the Steel Plate Girder Bridge)

  • 우상익;정경섭
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제4권2호
    • /
    • pp.103-111
    • /
    • 2000
  • The objectives of the study are to know the strain distribution and modal dynamic behaviour of steel bridge girders by actual traffic load. The live load effect depends on many parameters including the span length, gross vehicle weight, axle weight, axle configuration so on. For the estimation of static and dynamic characteristic, strain data caused by moving loads and traffic characteristics of passing vehicle under actual traffic load have measured using Bridge Weigh in Motion. To confirm the reliability of BWIM system, strain data measured using the $120{\Omega}$ strain gauge under the same condition. It is considered that the data acquired from BWIM system have reliability through the analysis and comparison between stress measured by strain data from BWIM and computed by FEM. Additionally according to the measured strain data of up-line and down-line on the highway, the up-line bridge grows more faster than the down-line bridge and girder 4 and 5 carry more load when vehicles pass the inner line and girder 2 and 3 does when vehicles pass the outer line as this case(the bridge composed with 5 girders).

  • PDF

ND-K-S를 적용한 항로 통항분포와 통항패턴 분석에 관한 연구 (A Study on the Analysis of Traffic Distribution and Traffic Pattern on Traffic Route using ND-K-S)

  • 김종관
    • 한국항해항만학회지
    • /
    • 제42권6호
    • /
    • pp.446-452
    • /
    • 2018
  • 항로는 선박의 통항이 빈번하여 사고의 위험이 높은 지역이지만, 선박의 통항분포에만 초점을 맞춘 연구가 다수였으며, 항로의 특성과 선박의 크기별 통항패턴에 대한 연구는 부족하였다. 이에 본 연구에서는 3개의 주요 항로에서의 통항분포와 통항패턴을 분석하기 위해서 3일간의 선박의 통항현황을 조사하였다. 통항현황을 바탕으로 항로를 10개의 Gate line으로 구분하고 각 Gate line을 통과하는 선박크기를 소형선, 중형선, 대형선으로 세 분류하여 분석하였다. 각 항로의 통항분석을 바탕으로 각 Gate line에서의 통항분포에 대하여 ND-K-S(Normal Distribution-Kurtosis-Skewness)를 적용하여 평가하였다. ND 평가 결과 통항분포에서 대형선은 정규분포를, 중형선은 편도항로에서만 정규분포를 만족하고, 소형선은 정규분포를 만족하지 않는 것으로 평가되었다. K-S 평가 결과 통항패턴은 왕복항로와 편도항로에서 뚜렷한 구분을 보였다. K 평가의 결과 편도항로에서는 고루 항로를 이용하는 통항패턴을 가지지만, 왕복항로에서는 항로의 한 부분에 집중하는 통항패턴을 가지는 것으로 평가되고, S 평가의 결과 편도항로에서는 항로의 중앙을 따라 항행하는 통항패턴을 가지지만, 왕복항로에서는 항로의 우측에 치우치는 통항패턴을 가지는 것으로 평가되었다. 다만 본 연구는 3개의 주요 항로를 비교한 만큼 향후 다양한 환경에서의 항로분석이 필요할 것으로 판단된다.

Open-loop Metro Line에서의 열차 운전도 모델링의 구현 (The Implementation of Train Diagram Modeling in the Open-loop Metro Line)

  • 홍효식;유광균;이태식;문영현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 추계학술대회 논문집 학회본부
    • /
    • pp.527-530
    • /
    • 1995
  • In this paper, traffic modeling and control design was considered to analyze and improve the stability of train diagram in the open-loop Metro line. A complete discrete-event traffic model describing the natural instability of open-loop metro line is analyzed. The traffic stability properties are introduced and easy-to-implement state feed back traffic control algorithms are designed, which satisfied with system stability.

  • PDF

교통시뮬레이션 모형을 이용한 램프미터링 정지선 설정에 따른 효과분석 (The Effectiveness Analysis on Set of Ramp Metering STOP-line Using Traffic Simulation Model)

  • 김인수;양충헌
    • 한국도로학회논문집
    • /
    • 제16권1호
    • /
    • pp.111-118
    • /
    • 2014
  • PURPOSES : This study performs fundamental research on ramp-metering design criteria. METHODS : We carefully review previous studies in terms of ramp-metering design criteria and then consider applicability in Korea. For this, traffic simulation model is employed to analyze actual effect according to specific location of stop-line when implementing ramp-metering. RESULTS : When a stop-line moving forward with a 50m interval, travel speed at mainline relative to current stop-line location tends to decrease. However, traveling speed at approach roads increase about 5~18% under the same condition. When a stop-line location moving backward with a 50m interval, mainline travel speed increase approximately 17~32% whereas traveling speed at approach roads decrease. All cases are compared with the current stop-line location. CONCLUSIONS : We believe that both cases are useful with respect to freeway management. For example, moving forward a stop-line case can be used management for queuing area at ramp section and approach roads. Moving backward a stop-line case can be used for traffic control, focusing on mainline of freeways.