• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.251-256
• /
• 2005

Today's port system,; require larger and faster operation of transfer cranes in order to accommodate rapidly increasing traffic. These cranes need precise control of their components for operational efficiency. This paper presents an IEEE 1451 based smart module that allows numerous sensors and actuators of the crane to attach themselves to various networks more easily. The smart module has been experimentally evaluated on a CAN network for its performance.

• Journal of the Korea Furniture Society
• /
• v.20 no.6
• /
• pp.581-589
• /
• 2009

Under 'The Design Street' Project, one of the urban environment improvement projects of Seoul, the facilities on the street have been greatly varied in terms of design. In addition, the municipal authority has pushed each district to develop its own identity based on the integrated design of the city. This study was aimed to propose a design which could solve the current problem in street furniture in terms of environmental improvement through an analysis on current street conditions in "Y" District as a part of Seoul Design Street Project. It has attempted to propose 11 street furnitures based on the basic strategy of 'Soft City' which has been promoted by Seoul City in accordance with the Seoul Public Facility Guidelines as 1. Airy Design, 2. Integrated Design, 3. Collaborative Design and 4. Sustainable Design. Among them, for the total design in Seoul six facilities - kiosk, manhole, traffic signal controller, public phone, road sign and waste receptacle were proposed by Seoul City have been accepted. For local differentiation, on the contrary, five items - planter bench, bollard, lifter, bike rack and fence have been newly designed and proposed. Furthermore, it is essential to carry out systematic supervision and continuous management on the detail design and construction of current regional design development projects.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.396-401
• /
• 2017

In this paper, we propose a solution for interference with Bluetooth when connecting Bluetooth and other devices. The random frequency hopping technique is a technique of generating a hopping pattern using the entire Bluetooth channel without considering the interference of the wireless LAN. The proposed adaptive frequency hopping technique is a technique for generating a hopping pattern of Bluetooth channel considering periodic carrier sensing of Bluetooth and considering WLAN interference. Simulation results show that the use of adaptive frequency hopping reduces the packet error rate as the Bluetooth carrier sensing interval decreases even in the congestion of WLAN interference. Especially, the frequency hopping technique improves the average packet error rate by about 13% compared to the adaptive frequency hopping technique.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.533-535
• /
• 2018

In the 21st century, in which the accident rate is rapidly increasing in proportion to the development of automobiles, In order to reduce the number of accidents, this paper was written for the convenience of the elderly people with disabilities and the handicapped. When a driver's safety accidents and various signals are transmitted through a smart phone by voice, the voice signal is processed as a video signal through the rear LED pannel of the vehicle, so that an urgent situation or a current state can be clarified It is also possible to use the local area network as a billboard and I would like to propose a study to show the advertising effect and current traffic situation.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.6
• /
• pp.760-772
• /
• 1999

The CAN is a serial communication protocol for distributed real-time control and automation systems. Data generated from field devices in the distributed control of power plant are classified into three categories: real-time event data, real-time control data, non-real-time data. These data share a CAN medium. If the traffic of the CAN protocol is not efficiently controlled, performance requirements of the power plant system could not be satisfied. This paper proposes a bandwidth allocation algorithm that can be applicable to the CAN protocol. The bandwidth allocation algorithm not only satisfies the performance requirements of the real-time systems in the power plant but also fully utilizes the bandwidth of CAN. The bandwidth allocation algorithm introduced in this paper is validated using the integrated discrete-event/continuous-time simulation model which comprises the CAN network and distributed control system of power plant.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.10
• /
• pp.21-31
• /
• 1994

This paper describes the multichannel combined R2MFC/DTMF/CCT reciver which provides a signaling service functions for call processing control in digital switching system. Using the TMS320C25 DSP chip, we have implemented multi-function receriver shich processes 8 channels of R2MFC, DTMF, and CCT signals simultaneously. In order to increase the channel multiplicity of the combined receiver. R2MFC and CCT receiver were employed by discrete Fourier transform(DFT) method using Goertzel algorithm, and DTMFreceiver was employ by infinite impulse reponse(IIR) filtering method using 4KHz subsampling technique. The combined receiver has 4 function modes for each channel such as R2MFC, DTMF, CCT, and Idle modes. The function mode of each channel may be selected at any time by single-chip micro-controller(.mu.C). Hence, the number of channels assigned for each function mode can be adjusted dynamically according to the signaling traffic variations. From the experimental test results using the test-bed, it has been proved that the combined receiver statisfies all receiver satisfies all receiver specifications, and provides good channel multiplicity and performance, Therefore, it may give a great improvement than existing receiver in cost, reliability, availability, and serviceability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8B
• /
• pp.739-746
• /
• 2004

An ATM/AAL2 is standardized to transmit delay sensitive application services, which has small size packet, efficiently. An AAL2 transmission scheme is used to deliver voice and data traffic on the lob interface between base station (Node-B) and Radio Network Controller (RNC) in UMTS network. To predict AAL2 performance, a detailed end-to-end UMTS network performance simulator was developed. We performed detailed simulation(cell packing density and bandwidth gain) for voice and data services in UTRAN. The results indicate that the maximum bandwidth gain in Node-B is about 17% and the bandwidth gain of AAL2 multiplexing in $I_{ub}$ for data services is less than that for voice service. Futhermore, the more offered load increase the more the bandwidth gain decreases in a concentrator.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.3775-3788
• /
• 2014

With the increasing number of the wireless and mobile networks, the way that people use the Internet has changed substantively. Wireless multimedia services, such as wireless video streaming, mobile video game, and mobile voice over IP, will become the main applications of the future wireless Internet. To accommodate the growing volume of wireless data traffic and multimedia services, cognitive radio (CR) and Information-Centric Network (ICN) have been proposed to maximize the utilization of wireless spectrum and improve the network performance. Although CR and ICN have high potential significance for the future wireless Internet, few studies have been conducted on collaborative operations of CR and ICN. Due to the lack of infrastructure support in multi-hop ad hoc CR networks, the problem is more challenging for video streaming services. In this paper, we propose a Cross-layer Video Streaming Mechanism (CLISM) for Cognitive Radio Ad Hoc Information Centric Networks (CRAH-ICNs). The CLISM included two distributed schemes which are designed for the forwarding nodes and receiving nodes in CRAH-ICNs. With the cross-layer approach, the CLISM is able to self-adapt the variation of the link conditions without the central network controller. Experimental results demonstrate that the proposed CLISM efficiently adjust video transmission policy under various network conditions.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.912-918
• /
• 1994

Poor speech intelligibility in an air traffic control room is frequently a result of many, quite different causes and occasionally leads to complaints of the controller personnel. The paper describes a sequence of successful tasks performed in a local control room. The initial measurements included an investigation of the background noise (caused by fans, air condition, computer and radar equipment) and performance checks of the electronic audio and communication equipment with respect to the audio transmission behavior. The spectral composition of the noise as well as the characteristics of the audio communication path between the controllers and the pilots(which showed a loss of spectral information in the audio band due to built-in notch filters for the suppression of control tones) required adaptations of the amplitude behavior of the amplifiers through user adjustable tone controls. The radar console fans, which contributed significantly to the overall noise floor of the room, underwent a substantial reconstruction by replacing the tight mounting with an elastic double suspension, reducing the noise level by 50%. Finally, a possible source of untimely fatigue of the controllers during their working hours has been found in strong spectral components of the noise above the audio band, radiated by numerous video monitors in the control through vibrating components excited by the line frequency of the video signal.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.62-65
• /
• 2018

This paper comes out with the study on sensing data collection strategy in a Software-Defined Mobile Edge vehicular networking. The two cooperative data dissemination are Direct Vehicular cloud mode and edge cell trajectory prediction decision mode. In direct vehicular cloud, the vehicle observe its neighboring vehicles and sets up vehicular cloud for cooperative sensing data collection, the data collection output can be transmitted from vehicles participating in the cooperative sensing data collection computation to the vehicle on which the sensing data collection request originate through V2V communication. The vehicle on which computation originate will reassemble the computation out-put and send to the closest RSU. The SDMEVN (Software Defined Mobile Edge Vehicular Network) Controller determines how much effort the sensing data collection request requires and calculates the number of RSUs required to support coverage of one RSU to the other. We set up a simulation scenario based on realistic traffic and communication features and demonstrate the scalability of the proposed solution.