• Korean Journal of Computational Design and Engineering
• /
• v.16 no.2
• /
• pp.83-91
• /
• 2011

There are many researches to make low-energy building. Lots of them focus on facility systems and insulation performance of building materials. However, not only systematic solutions but also approaches in early design stages are important to reduce energy consumption. Using BIM(Building Information Modelling) is considered as an effective and efficient way to simulate building energy and decide alternatives than traditional energy simulation because BIM based energy simulation makes to reduce much time for energy modeling. This study focuses on development of optimized geometry for super tall office buildings in Seoul, Korea. Specifically, length to width ratio and building orientation are main topics of this study because these two topics are the most basic and preceding factors deciding mass design. In this study, Revit MEP 2011 and Ecotect Analysis 2011 are used to make case models and calculate energy load in early design stages. Energy properties of material abide by Korean Standards for Energy Conservation in Building, Korean Guideline for Energy Conservation in Public Office and ASHRAE Standard in USA. This study presents best length to width ratio of plan and optimized orientation by evaluating the case models. Furthermore, this study suggests what should be considered for each case to decrease energy load.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.21-29
• /
• 2008

The deterioration of Korean traditional wooden house located in seoul was estimated. This house was attacked by termite. To estimate damage status of buildings, non-destructive methods were applied. Some of the post needed to be replaced due to low strength, estimated by nondestructive methods. The house was installed with boiler heating facility, to use office and public education. This kind of heating system changed the environmental condition of the wooden house. The termite which attacked the house was classified as Reticulitermes speratus. Because of durability of wooden house effected by environment, control of the environmental condition is essential for maintaining the wooden house. The installation of modern facility to traditional wooden house should not change the traditional structure and do not effect to durability of wooden house.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.111-118
• /
• 2014

While large-sized facilities (type I II) have been managed systematically after the establishment of the Special Law for Safety Management on Facility, the management of small-sized facilities is relatively poor. The small-sized facilities have been managed by The Basic Law for Disaster and Safety Management, however, it is hard to manage them systematically as related standards are not established. Therefore, this study proposed the management plans for including the facilities such as some road tunnels and utility tunnels, which have the definite manager and a high possibility to harm the public, into type I and II facilities. In addition, it proposed the reinforcement plans of safety management for small-sized and vulnerable facilities such as breast wall and cut slopes, traditional markets and pedestrian bridges, which are fundamental facilities closely related to people's life, although a budget and a man-power are not enough.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.3
• /
• pp.56-64
• /
• 2021

Pavilion is an important landscape installation in the traditional landscaping and a representative facility that organizes space. To interpret and succeed the traditional landscape space, researches on the shape and structure of the traditional pavilion are also needed. However, researches on the style and structure of the traditional pavilion are difficult to be found. Accordingly this study aimed to identify the structural characteristics of roof part that occupied the largest portion in determining the shape of pavilion. Our research findings are as follows. As a result of analyzing 15 traditional Single-room square pavilions whose structure could be identified, it was found that the main building elements that distinguished the type of roof part in the Single-room square were crossbeam, ridge pole, and baluster. Depending on the presence of roofing members, pavilion was classified into five types: crossbeam, crossbeam+ridge pole, crossbeam+baluster, ridge pole, and baluster. In addition, as a result of analyzing the load and joint that worked on crossbeam based on the shape classification of roof part, it was found that in the traditional Single-room square pavilion, crossbeam was designed to play a balancing role between pillar and load. This study is significant in that it attempted to make a close interpretation of the shape of roof part in the pavilion and the role and function of building elements in terms of size, ratio, and load.

• Journal of architectural history
• /
• v.22 no.4
• /
• pp.59-72
• /
• 2013

Jedoguk and Jaesiljaesanjeongriguk were the offices related to the reorganization of the royal finance during the Residency-General period and surveyed royal facilities. Jedoguk surveyed palaces, offices and royal ritual facilities in the manner of traditional survey. However, Jaesiljaesajeongriguk which is the successor office to Jedoguk surveyed royal facilities using the modern surveying techniques and figured out the value of royal facilities. In 1908, most of the royal facilities were nationalized and were managed as government property by Takjibu. These nationalized royal facilities were used new modern facilities under the rule of Japanese.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.11a
• /
• pp.191-195
• /
• 2005

Till now, the roles of a tradition market were a circulation of the necessities of life, a employment market of local society, a center of community, and a main structure of local economy. Recently, these tradition market is on the decline because it couldn't cope with the internal and external changes. It is recognized that these phenomenon is a factor of economy unbalance. So, to activate the local economy, tradition market should be promoted. Therefore, external changes such as the increase of competition intensity and the changes of consume pattern, internal changes such as the deterioration of facility and old fashioned management were analysed. The activation plan of traditional market were suggested through the decision index for the tradition market in this study.

• Journal of Construction Engineering and Project Management
• /
• v.1 no.2
• /
• pp.43-48
• /
• 2011

In many parts of the world, low cost housing used to be built and maintained by the governments, based on designs and detail specifications prepared by the public sector with construction carried out by contractors. Results vary due to differences in design standards, workmanship and property management, depending also on the neighbourhood's care of the estates and their pattern of usage. In the UK, where Private Finance Initiative (PFI) has been used for infrastructure projects, there have been successful cases of city estate being transformed by PFI. These PFI housing schemes involve new-build, refurbishment as well as facility management. Unlike traditional construction, which is based on prescriptive specifications, PFI housing is based on output specifications. A study has been undertaken to compare the two specification approaches as they are applied to housing estate. Results are enlightening and serve as good reference to cities such as Hong Kong SAR and Singapore, where public housing provisions have been a major concern of their citizens as the building stock gets older.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.2
• /
• pp.171-182
• /
• 2022

The regular assessment of a building is important to understand structural safety and latent risk in the early stages of building life cycle. However, methods of traditional assessment are subjective, atypical, labor-intensive, and time-consuming and as such the reliability of these results has been questioned. This study proposed a method to bring accurate results using a 3D laser scanner and integrate them in Building Information Modeling (BIM) to visualize defective condition. The specific process for this study was as follows: (1) semi-automated data acquisition using 3D laser scanner and python script, (2) scan-to-BIM process, (3) integrating and visualizing defective conditions data using dynamo. The method proposed in this study improved efficiency and productivity in a building assessment through omitting the additional process of measurement and documentation. The visualized 3D model allows building facility managers to make more effective decisions. Ultimately, this is expected to improve the efficiency of building maintenance works.

• Land and Housing Review
• /
• v.10 no.4
• /
• pp.1-12
• /
• 2019

The purpose of this study is to set the direction of development of the design guideline of the New-Hanok-Style public building in apartment complex and to use it as basic data for future architecture plans. The existing Hanok architecture standards and guidelines were analyzed and the characteristics of New-Hanok-Style Public Building in apartment complex were applied. The planning direction of the design guideline was derived. First, although the criteria and guidelines related to the Hanok produced and distributed were classified differently according to the purpose of production, the details and contents were similar. Second, the general planning criteria items were divided into layout, external space plan, building plan, and performance plan. Third, the elements of 'creative inheritance of traditional architecture' and 'modern building technology', which are the characteristics of New-Hanok-Style Public Building, were applied. In addition, we analyzed elementary welfare facility guidelines and applied elements such as layout type and zoning setting. Fourth, a special planning standard for applying the building system required for the New-Hanok-Style Public Building in apartment complex was added. In the future, it is expected to revitalize New-Hanok-Style Public Building containing the unique identity(genetic factor; DNA) of the nation by developing and disseminating relevant building standards, design guidelines, and maintenance manuals.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.1-9
• /
• 2014

This article is the results of excavation data and it aims to interpret the composition facilities of the Royal garden at the Wanggung-ri site. The base of research was prepared through excavation and study on the royal garden at the Wanggung-ri site, which was constructed in Sa-bi period of Baek-je. The elements for the royal garden at the Wanggung-ri site were divided in 3 parts. - 1) Stonework facility 2) Installation for conveyance of water : Large moat-shaped ditch and Winding waterway(1~6 and water catchment) 3) Square cornerstone building. In this article, I arrange the basic data about facilities and function of the royal garden for making recovery of original form. First of all, I reason that stonework facilities were in charge to make space for catchment and boundary. Especially the Round angel rectangular stonework facility took charge of complex roles as catchment and water conveyance, and water can be transferred to the large moat-shaped ditch through joint between them. I confirmed that the round angel rectangular stonework facility and the large moat-shaped ditch which were connected by joint are one of the facilities in the royal garden. The large moat-shaped ditch protected the eastern, the northern walls and workshop site under the inclined plane to minimize the damage. Also, the large moat-shaped ditch took several roles, especially water catchments and landscaping. The large moat-shaped ditch was continually used from the period of Baek-je to the unified Silla, as a result it was completely deposited inside. After that, the 6 winding waterway were built in the western inclined plane with similar needs with the large moat-shaped ditch, and the square cornerstone building was built in same time. I noticed that the square cornerstone building was built as a part of the royal garden in Sa-bi period of Baek-je through the remains of Baek-je tiles around the building. After that, the square cornerstone building was built in same place as reconstruction.