• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.4
• /
• pp.219-230
• /
• 2011

The nuclear fuel cycle (NFC) analysis is a study to set a NFC policy and to promote systematic researches by analyzing technologies and deriving requirements at each stage of a fuel cycle. System analysis techniques are utilized for comparative analysis and assessment of options on a considered system. In case that NFC is taken into consideration various methods of the system analysis techniques could be applied depending on the range of an interest. This study presented NFC analysis strategies for the development of a domestic advanced NFC and analysis techniques applicable to different phases of the analysis. Strategically, NFC analysis necessitates the linkage with technology analyses, domestic and international interests, and a national energy program. In this respect, a trade-off study is readily applicable since it includes various aspects on NFC as metrics and then analyzes the considered NFC options according to the derived metrics. In this study, the trade-off study was identified as a method for NFC analysis with the derived strategies and it was expected to be used for development of an advanced NFC. A technology readiness level (TRL) method and NFC simulation codes could be utilized to obtain the required metrics and data for assessment in the trade-off study. The methodologies would guide a direction of technology development by comparing and assessing technological, economical, environmental, and other aspects on the alternatives. Consequently, they would contribute for systematic development and deployment of an appropriate advanced NFC.

• Bulletin of the Korean Space Science Society
• /
• 2005.10a
• /
• pp.72-72
• /
• 2005

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.102-109
• /
• 2003

The number of engines for fighters has been decided by thrust required and available engines at the time since the beginning of the jet age. However, many factors such as combat effectiveness, survivability, performance, and cost were considered as engine technology has been progressed. From the vietnam war and desert storm, a twin engine fighter was shown slight superiority to a single engine one in an vulnerability，but single engine fighters were a little predominant in susceptibility This paper includes the trade-off study results on the number of engines for the supersonic light attack aircraft with single and twin engines. Twin engine configuration is 8%, 26%, and 13% higher than single engine one in MTOGW, Flyaway Cost, and LCC respectively. Little difference has been found in RM&S, Maneuver and field performance. According to the factors above, single engine fighter is profitable for low class and twin engine one for medium and higher class.

• Journal of Preventive Medicine and Public Health
• /
• v.36 no.2
• /
• pp.163-170
• /
• 2003

Objectives : This study aimed to develop an evaluation protocol of disability weights using person trade-off, and to test the reliability of the developed protocol in a Korean context. Methods : To develop the valuation protocol, the Global Burden of Disease(GBD) and the Dutch studies were replicated and modified. Sixteen indicator conditions were selected from the Korean version of disease classification, which was based on that of the GBD Study, and the person trade-off method referred to the Dutch method. Results : The disability weights were valued in a two step panel sfudy. The first step was a carefully designed group process by three panels, using person trade-off to establish the disability weights for sixteen selected indicator conditions. The second step consisted of interpolation of the remaining diseases, on a disability scale, by the individual members of three panels. The members of three panels were all medical doctors, with sufficient knowledge of the consequences of a broad variety of diseases. The internal consistency of the Korean disability weights was satisfactory. Considerable agreement existed within each panel and among the panels. Conclusions : It was feasible to use a modified evaluation protocol from those used in GBD and Dutch studies, This would provide a rational basis for an international comparative study of disability weights.

• The Journal of Korea Robotics Society
• /
• v.5 no.1
• /
• pp.70-76
• /
• 2010

This paper addresses a design issue of "model complexity and performance trade-off" in the application of bandwidth extension (BWE) methods to the intra-frame predictivevector quantization problem of wideband speech. It discusses model-based linear and non-linear prediction methods and presents a comparative study of them in terms of prediction gain. Through experimentation, the general trend of saturation in performance (with the increase in model complexity) is observed. However, specifically, it is also observed that there is no significant difference between HMM and GMM-based BWE functions.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.660-667
• /
• 2003

In this study, a Multiple Objective Mixed Integer Programming (MOMIP) Model is developed for sewer rehabilitation planning by considering cost, inflow/infiltration. A sewer rehabilitation planning model is required to decide the economic life of the sewer by considering trade-off between cost and inflow/infiltration. And it is required to find the optimal rehabilitation timing, according to the cost effectiveness of each sewer rehabilitation within the budget. To develop such a model, a multiple objective mixed integer programming model is formulated based on network flow optimization. The network is composed of state nodes and arcs. The state nodes represent the remaining life and the arcs represent the change of the state. The model consider multiple objectives which are cost minimization and minimization of inflow/infiltration. Using the multiple objective optimization, the trade-off between the cost and inflow/infiltration is presented to the planner so that a proper sewer rehabilitation plan can be selected.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.47-56
• /
• 2001

Nitrogen oxides(NOx) and smoke emissions of diesel engine are regarded as a source of air pollution, and there is a global trend to enforce more stringent regulations on these exhaust gas emissions. However, the trade-off relation of NOx and smoke is a main obstacle to reduce both of them simultaneously. In this paper, experiments were conducted with an oxygenated fuel(diethyl ether) as an effective way to improve the trade-off relation of NOx and smoke. Exhaust emissions of diesel fuels with DEE were influenced by the additive content of DEE and the injection timing. Especially, DEE effected more at the high engine speed and load than at the low engine speed and load. Diesel fuel blended with DEE 10% was a desirable blend for the simultaneous reduction of NOx and smoke.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.6
• /
• pp.1-7
• /
• 2005

This paper deals with the position control for a feed drive system in CNC milling machine. The study shows that reduction in tacking error does not necessarily increase contouring accuracy, and proposes that a proper control scheme is able to exhibit the optimal tracking and contouring accuracy. The proposed scheme is to fix the parameter of the contouring control, and to find the optimal value of the parameter of the tracking control, which is automatically tuned. The effectiveness of the proposed scheme is confirmed through simulations.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.44-51
• /
• 2003

By blending of various low boiling point oxygenated agents to lower grade fuels, significant improvements were simultaneously obtained in smoke, CO, PM, SOF and BSEC. Especially, our trends were remarkably obtained by retarding injection timing, by decreasing boiling point and increasing blending contents of additives in case of oxygenated agents rather than non-oxygenated agents. Also, it was revealed that when 20vo1.% DMM added to high viscosity fuels and injection timing was retarded, NOx-smoke trade off relationship was much better than that of ordinary diesel fuel. Thus, lower grade fuels with high viscosity could be expected to be used efficiently and cleanly in diesel operation by blending low boiling point oxygenates.

• Journal of Korea Multimedia Society
• /
• v.3 no.2
• /
• pp.184-191
• /
• 2000

In thid paper, we have analized the characteristics of $\Delta$-shaped filter based on preceeding study. The algorithm of $\Delta$-shaped filter for full screen display has been discussed including their edge-preserving characteristics and computaion complexity compared with the conventional algorithms. PSNR has been employed to compare the proposed method to the conventional algorithms. The proposed algorithm has been implemented using Synopsys VHDL tool. In addition, the features and trade off of the $\Delta$-shaped filter have been discussed.