• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.24-29
• /
• 1999

The purpose of this study is to develop a method of applying response surface analysis to trade-off techniques for the conceptual design of armored vehicle. The problem areas of concern are the use of this method in the selection of optimum design points when user requirements are in conflict. The application of this method to trade-offs of performance parameters in terms of weight are presented.

• 한국병원경영학회지
• /
• 제11권2호
• /
• pp.61-86
• /
• 2006

Based on a previous literature about hospital capital structure(Shyam- Sunder & Myers, 1999), this study attempted comparison and analysis on whether the forecast of trade-off and pecking order theory could be validated in hospital's capital structure. First, this study analyzed whether hospitals follow the priority for each capital source as suggested by pecking order theory under lack of capital running in hospital. Next, it analyzed whether debt level is regressed on the average to target debt level so as to verify the validity of trade-off theory. Finally, it also analyzed possible associations between debt level and determinants of capital structure as adopted in static trade-off theory, so as to verify relative advantages of these two theories about hospital capital structure. The analysis over whole period showed that both trade-off theory and pecking order theory isn't supported particularly. This mean that each hospital's financing behaviors is different and that has not dominant financing behaviors. In the midst of separation of dispensary from medical practice, medical institutions in Korea first finances funds required using retained earnings and then use liabilities. however pecking order theory is supported, the preference of long-term liabilities and short-term liabilities is not clear. In addition, considering that debt level is in no average regression to target debt ratio, it is found that hospital capital structure following trade-off theory turns into that subject to pecking order theory via the separation of dispensary from medical practice.

• 한국항공우주학회지
• /
• 제43권2호
• /
• pp.179-185
• /
• 2015

우주용 고해상도 전자광학카메라의 개발에 있어 초점면 배열 장치(Focal Plane Assembly, FPA)의 열제어 설계는 영상품질을 결정하는 중요한 요소이다. FPA 열제어 설계의 목표는 영상 촬영 기간 중 안정적인 열 환경을 제공하는 것으로, 촬영 기간 동안 운용 온도를 주어진 범위 내로 유지해야 하며 후속 촬영에 문제가 없도록 빠른 시간 내에 온도 초기화를 완료해야 한다. 상기의 두 항목인 온도 유지와 온도 초기화 중에서 FPA 구조 설계에 따른 영향을 가장 많이 받으며, 설계 변경의 자유도가 상대적으로 낮은 온도 유지 항목에 대하여 FPA 구조설계 초기 단계부터 검토 및 반영이 가능한 단순화 된 열 저항 해석 기반의 온도 예측 방안을 정의하였다. 또한 열해석 결과와의 비교를 통해 온도 예측 방안을 검증, FPA 설계를 위한 trade-off에 효과적으로 사용할 수 있음을 확인하였다.

• 보건행정학회지
• /
• 제16권4호
• /
• pp.24-47
• /
• 2006

Based on the findings of a study focused on medical institutions(Fama & French, 2002), this study determined possible causality between determinants of capital structure and liability level, while estimating targeted debt ratio. Moreover, it also examined hypotheses about the adjustment of targeted debt ratio and the of fundraising patterns, so that it verified the relative priority of trade-off theory and pecking order theory. First, profitability had positive(+) relationships with liability level, while investment opportunities had negative(-) relationships with liability level. This finding supported pecking order theory, and non-liability tax shield effects had negative(-) relationships with liability level as estimated in both trade-off theory and pecking order theory. Next, this study verified trade-off and pecking order theory at once by means of regression analysis about the variation of liability level in associations with disparity from targeted debt ratio and short-term fluctuation of profit and investment. As a result, it was noted that liability level became mean-reversed to targeted liability ratio but slowly, SO it was difficult to assert that such mean reverse may support trade-off theory. However, the finding that most of short-term fluctuations of profit and investment are absorbed into liabilities supported pecking order theory. On the other hand, it was found that the larger scale of medical institutions is more supportive of pecking order theory in the associations between liability level and profitability and the fundraising patterns than trade-off theory.

• 한국시스템다이내믹스연구
• /
• 제16권2호
• /
• pp.75-100
• /
• 2015

The purpose of this study is to analyze causation of Ecosystem service's trade-off(ES trade-off) and to establish baseline data for wise spatial planning and management. In order to understand why and how ES trade-off occurs, systems thinking and causal loops were employed. The causal loop of ecosystem service creation cycle includes profits quantification process, decision making process, spatial planning and management process, and ecosystem services creation process. The profits quantification process has a limitation that all ecosystem service categories were not included in profits quantification, because quantification method for cultural services is insufficient. These problems led to unequal discussion opportunity in decision making process. ES trade-off occurs through transition of ecosystem function in spatial scale and temporal scale. In spatial scale, land-use variation and resource-use variation contribute to change an ecosystem function for different ES category by spatial planning and management. In temporal scale, a change of an ecosystem function for different ES category is influenced by ecological succession, seasonal change and land cover variation, which are parameter from environmental features. This study presented that spatial planning and management should ecosystem service assessment in order to enhance balanced ecosystem services.

• Nuclear Engineering and Technology
• /
• 제49권2호
• /
• pp.404-410
• /
• 2017

In order to help decision-makers in the early design phase to improve and make more cost-efficient system safety and reliability baselines of aircraft design concepts, a method (Multi-objective Optimization for Safety and Reliability Trade-off) that is able to handle trade-offs such as system safety, system reliability, and other characteristics, for instance weight and cost, is used. Multi-objective Optimization for Safety and Reliability Trade-off has been developed and implemented at SAAB Aeronautics. The aim of this paper is to demonstrate how the implemented method might work to aid the selection of optimal design alternatives. The method is a three-step method: step 1 involves the modelling of each considered target, step 2 is optimization, and step 3 is the visualization and selection of results (results processing). The analysis is performed within Architecture Design and Preliminary Design steps, according to the company's Product Development Process. The lessons learned regarding the use of the implemented trade-off method in the three cases are presented. The results are a handful of solutions, a basis to aid in the selection of a design alternative. While the implementation of the trade-off method is performed for companies, there is nothing to prevent adapting this method, with minimal modifications, for use in other industrial applications.

• 항공우주시스템공학회지
• /
• 제10권3호
• /
• pp.23-31
• /
• 2016

The intermediate mixing chamber is one of various methods for improving the regression rate and combustion efficiency of the hybrid rocket. The mixing chamber with its non-combustible material makes the propulsion performance increase, but it leads to a low fuel-loading density in the combustion chamber; therefore, this performance-related trade-off between the mixing chamber and the low fuel-loading density was studied. In this study, the trade-off was conducted by comparing the intermediate-mixing-chamber case with a w/o-mixing-chamber case. The small hybrid-sounding rocket is designed with internal ballistics for comparing the rocket length to the weight. In addition, an external ballistic analysis was conducted for comparing the performances of the w/- and w/o-mixing-chamber cases. As a result, the intermediate-mixing-chamber case shows that the length and the weight were decreased to 12 % and 8 %, respectively; furthermore, when compared with the normal cases, the estimated altitude result of the w/-mixing-chamber case was increased to approximately 75 m.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.40-41
• /
• 2020

As the capacity of the 3d scanner developed, the reverse engineering using the 3d scanner is emphasized in the construction industry to obtain the 3d geometric representation of buildings. However, big size of the indoor point cloud data acquired by the 3d scanner restricts the efficient process in the reverse engineering. In order to solve this inefficiency, several pre-processing methods simplifying and denoising the raw point cloud data by the rough standard are developed, but these non-standard methods can cause the inaccurate recognition and removal the key-points. This paper analyzes the correlation between the accuracy of wall recognition and the density of the data, thus proposes the proper method for the raw point cloud data. The result of this study could improve the efficiency of the data processing phase in the reverse engineering for indoor point cloud data.

• 시스템엔지니어링학술지
• /
• 제10권1호
• /
• pp.17-32
• /
• 2014

The trade-off studies in the concept development stage to assess the relative goodness of alternative systems concepts for AE (architect engineering) design for the Barge Mounted SMR (BMSMR) is introduced. With respect to design margin, system performance, schedule and risk, the design selection is cond ucted using the following characteristics; barge mobility, system safety under the natural disaster (seismic), power output, interfacing with the other system, and the additional supporting functions as desalination. There are three findings that should be remedied; deficiencies in the assumed characteristics of the system being modeled, deficiencies in the test model, and excessively stringent system requirements. This study is performed using systems engineering approach with trade off matrix method. In order to execute this work, concept development stage is divided into three (3) phases as NA (needs analysis), CE (concept exploration), and CD (concept definition).

• 한국군사과학기술학회지
• /
• 제3권1호
• /
• pp.66-75
• /
• 2000

The purpose of this study is to develop and illustrate methods of applying trade-off techniques to landing craft air cushion design evaluation. The problem areas of concern are the application of quantitative analytical methods to conceptual design. The interrelationships between composite system measures and selected performance requirements(speed, cruising range, cargo etc.) are analyzed and the expressions for gross weight are developed as functions of performance parameters. Trade-offs of performance parameters in terms of weight are then calculated. The application of these results to evaluation of Require Operational Capabilities are illustrated.