• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.1053-1064
• /
• 2005

The mechanical damage of concrete is normally attributed to the formation of microcracks and their propagation and coalescence into macroscopic cracks. This physical degradation is caused from progressive and hierarchical damage of the microstructure due to debonding and slip along bimaterial interfaces at the mesoscale. Their growth and coalescence leads to initiation of hairline discrete cracks at the mesoscale. Eventually, single or multiple major discrete cracks develop at the macroscale. In this paper, from this conceptual model of mechanical damage in concrete, the computational efforts were made in order to characterize physical cracks and how to quantify the damage of concrete materials within the laws of thermodynamics with the aid of interface element in traditional finite element methodology. One dimensional effective traction/jump constitutive interface law is introduced in order to accommodate the normal opening and tangential slips on the interfaces between different materials(adhesion) or similar materials(cohesion) in two and three dimensional problems. Mode I failure and mixed mode failure of various geometries and boundary conditions are discussed in the sense of crack propagation and their spent of fracture energy under monotonic displacement control.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.4
• /
• pp.758-762
• /
• 1997

There are various types of localized tooth malpositions in the mixed dentition, such as abnormal tooth axis, anterior crossbite of some incisors, impaction, midline diastema, ectopic eruption, and so forth. We, Pediatric Dentists, have usually used removable appliances for these instances. But, removable orthodontic appliances, as is known, have marked limitations in some situations, for example, severe rotation, intrusion and extrusion, root torque, closure of large diastema, traction of impacted tooth, etc. In such cases, Whip spring, combined with fixed or removable appliance, can increase utilities of removable orthodontic appliances. The authors have applied whip springs to some cases showing localized positional and arrangement problems, and have witnessed the results as follows; 1. The refined and elaborate control of direction and magnitude of force by the operator, and accurate compliance of the patients were requisite for the treatment with it. 2. It showed special effectiveness for de rotation of incisors. Although it yields some benefit for root movement, the special consideration for incomplete roots in this age bracket was required. 3. In the localized malalignment cases in mixed dentition, uncurable with traditional removable appliances but practically unrealistic with fixed appliance therapy, the whip spring was thought to be a good alternative.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.196-198
• /
• 2007

In the substations for traction systems and the large-scale discharging system of secondary batteries, the voltage of DC bus line goes up by the regenerated energy and the energy is usually wasted in resistor for system stability. This paper proposes the DC power regenerating system using a three phase PWM inverter. The proposed system can regenerate the excessive DC power from DC bus line to AC supply and control the power factor of AC supply to unity. To implement unity power factor, the magnitude of the inverter output voltage should be higher than that of AC supply and therefore SVPWM technique is adopted. Computer simulations are carried out to verify the validity of the proposed system.

• Journal of the Korean Society of Safety
• /
• v.29 no.1
• /
• pp.7-14
• /
• 2014

Inverter module, which feeds the converted power to the traction motor for EMU. Consists of the power semiconductors with their gate drive unit(GDU)s and the control computer for driving, voltage, current and speed controls. Electrolytic condenser, connected to the gate drive unit and a core component to drive the power semiconductor, has problems such as reduction in lifetime and malfunction caused by electrical and mechanical characteristic changes from heat generation during high speed switching for generation of stable power. In this study, To check the service life of electrolytic condenser, the test was carried out in two ways. First, In the case of accelerated life testing of condenser, the Arrhenius model is a way of life testing. Another way is to analyze the reliability of the failure data by the method of parametric data analysis. Eventually, life time by accelerated life test than a method of failure data analysis(Weibull distribution) was found to be slightly larger output.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.227-228
• /
• 2014

열차가 주행하는 선로에 설치되는 궤도회로는 레일 자체를 전기회로의 일부로 사용하여 일정 구간 내의 차량 유무를 판단하기 위한 회로이다. 국내의 경우 사용 주파수에 따라 전원전압 주파수의 짝수 고조파 대역을 사용하는 고속선 궤도회로와 홀수 고조파 대역을 이용하는 일반선 궤도회로로 구분할 수 있다. 이러한 궤도회로가 설치된 선로를 주행하는 고속차량의 주전력변환장치 컨버터는 단위 역률 제어를 수행하기 위하여 전원전압의 홀수 배수의 스위칭 주파수를 가지고 있기 때문에 컨버터 동작 시 가선전류에 고조파 전류가 생성된다. 이 때 컨버터부에서 발생되는 고조파 전류의 주파수와 궤도회로의 사용 주파수 대역이 일치하는 경우에 궤도회로의 오작동을 유발할 수 있다. 본 논문에서는 입력 컨버터부에서 사용하는 스위칭 주파수를 운행 구간에 따라 가변시켜 궤도회로 간섭 고조파 성분을 제어하는 방법을 제안하고 시험을 통해 성능을 확인하였다.

• Safety and Health at Work
• /
• v.9 no.1
• /
• pp.17-24
• /
• 2018

Background: Increasing the slip resistance of floor surfaces would be desirable, but there is a lack of evidence on whether traction properties are linearly correlated with the topographic features of the floor surfaces or what scales of surface roughness are required to effectively control the slipperiness of floors. Objective: This study expands on earlier findings on the effects of floor surface finishes against slip resistance performance and determines the operative ranges of floor surface roughness for optimal slip resistance controls under different risk levels of walking environments. Methods: Dynamic friction tests were conducted among three shoes and nine floor specimens under wet and oily environments and compared with a soapy environment. Results: The test results showed the significant effects of floor surface roughness on slip resistance performance against all the lubricated environments. Compared with the floor-type effect, the shoe-type effect on slip resistance performance was insignificant against the highly polluted environments. The study outcomes also indicated that the oily environment required rougher surface finishes than the wet and soapy ones in their lower boundary ranges of floor surface roughness. Conclusion: The results of this study with previous findings confirm that floor surface finishes require different levels of surface coarseness for different types of environmental conditions to effectively manage slippery walking environments. Collected data on operative ranges of floor surface roughness seem to be a valuable tool to develop practical design information and standards for floor surface finishes to efficiently prevent pedestrian fall incidents.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.26 no.2
• /
• pp.25-30
• /
• 2024

This study was conducted to develop the hanging type circular-patterned system that at maximizing the spatial efficiency of strawberry cultivation to increase yields, while also reducing labor and improving energy efficiency. The system consists of a cultivation bed units, longitudinal moving device, bed lifting device, front and rear transfer devices, lateral transfer device, nutrient supply device, and control unit. Performance testing revealed that the operational motor for longitudinal movement should have a torque of at least 0.1Nm based on the design weight and traction force of the cultivation bed unit. The power consumption required to move one cycle was calculated to be approximately 149Wh when performing harvesting or maintenance tasks for all 10 cultivation beds. Vibration angles measured during bed movement showed that the lateral transfer resulted in a roll angle ranging from -0.62° to 0.68° and a pitch angle ranging from -3.79° to 5.26°. For longitudinal transfer, the roll angle ranged from -3.37° to 3.36°, and the pitch angle ranged from -0.45° to 0.49°.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4469-4474
• /
• 2014

This paper proposes a novel analysis method on the driving performance of LIM (linear induction motor) by FEM (finite element method). First, a linear model was converted with a rotation model to perform the dynamic analysis for a long time. Through the FEM model, the slip parameter for the control algorithm could be induced effectively. The LIM for the traction system was performed at a constant V/f in the region of constant torque, and a constant V and variable f in the region of constant power. Several slip characteristic curves according to the voltage and frequency were calculated by FEM in advance. The driving performance was then induced by interpolating the slip characteristic curves according to the load of the vehicle.

• The Journal of Pediatrics of Korean Medicine
• /
• v.29 no.4
• /
• pp.67-76
• /
• 2015

Objectives The purpose of this review is to investigate the domestic and foreign studies of pediatric Chuna treatment and propose the directions of future studies and clinical applications. Methods We searched for the study at RISS, KISS, DBPIA, Pubmed, CNKI by keywords, '추나', 'Osteopathic', 'Chiropractic', 'Manipulation', '推拿', '導引', '按摩', After 2010. Results 1. Selected 3 domestic studies were categorized as 1 survey study and 2 case reports. Selected 41 foreign studies from Pubmed were categorized as 15 systemic reviews, 8 survey studies, 12 case reports and 6 control studies. Selected 82 foreign studies from CNKI were categorized as 10 systemic reviews, 22 case reports and 50 control studies. 2. 2 clinical domestic studies researched on idiopathic Scoliosis. The foreign clinical studies from Pubmed are 18 cases, and those studies were categorized into Premature baby care (3), Infant colic (2), ADHD (2), Congenital talipes equinovarus (1), Somatic dysfuntion (1), Nonsynostotic occipital plagiocephaly (1), Conversion disorder (1), Lower back pain (1), Chronic bilateral dorsal foot pain and stiffness (1), plantar fasciitis (1), Migraine headaches (1), Cyclic vomiting syndrome (1), Acute otitis media (1) and Cerebral palsy (1). The other 72 foreign clinical studies were from CNKI, and they studied 39 different diseases. Systematically, they studied about digestive diseases (25), respiratory diseases (20), fever (6), musculoskeletal diseases (5), nervous system diseases (5), dermatology diseases (2) and other disease states. The Chuna treatment was used in variety of studies. 3. 2 clinical domestic studies adopted techniques of Osteopathy Chuna. The foreign clinical studies from Pubmed adopted techniques of Osteopathic manipulation (10) and Chiropractic manipulation (8). The other foreign clinical studies from CNKI adopted techniques of Acupressure (69), Abdominal manipulation (23), Spinal manipulation (21), Thoracic manipulation (11), Traction manipulation (2), Muscular manipulation (2), Squeezing Sha manipulation (1), Spine correction (1), Joint manipulation (1) and Fascia manipulation (1). Conclusions In addition to musculoskeletal disorders, variety of pediatric diseases could be treated with Chuna treatment instead of acupuncture.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.6
• /
• pp.538-545
• /
• 2001

In this paper a gearless drive system using a permanent-maget synchronous motor for high speed elevators is addressed. The application of permanent magnet synchronous motor to an elevator traction machine enables several improvements including higher efficiency better ride comfort smaller size and lighter weight and so on A PWM boost converter has been also adopted so that DC-link voltage regulation bi-directional power flow and controllable power factor with reduced input current harmonics are possible. To increase the reliability and performance of overall control system the unified control board which can include the car and group controller as well as PWN converter/inverter controller has been designed based on a DSP TMS320VV33. In addition the dynamic load simulator system has been developed so that the drive system of high speed elevator can be tested and evaluated without and limitation on ride distance. Some experimental results are given to verify the effectiveness of the developed system.